Bottle shaker with 1 bottle

Wacker unbekannt

Condition: used, approx. 15t available Njdpfx Ahedc A Sij Uslk

Year of construction: 1988, condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Nledpfx Ahobqi Tbj Ujk Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Nedpfx Ajd Dhwneh Uelk Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Various other configurations available

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Rotor width: 800 mm 5-blade rotor Nodsg H Nf Rjpfx Ah Ujlk 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW

Condition: excellent (used), Kärcher Type: PC 60/130 T / with oil separator (skimmer) attachment kit Kärcher parts cleaner Manufacturing, maintenance, workshops, metal processing - automatic parts cleaners have many applications. The parts cleaners work on the basis of aqueous solutions without solvents. The top loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm in diameter, 310 mm in height and 130 kg maximum weight. The items to be washed are cleaned using three-dimensionally arranged flat jet nozzles using solvent-free, heated Kärcher water-based cleaning agents. The items to be washed rotate on an electrically driven rotating basket during cleaning. The Parts Cleaner PC 60/130 T offers numerous practical details such as an integrated small parts drawer that reliably catches loose parts and coarse dirt particles. Equipment: Operating hour meter Holding ring (stainless steel for turntable) Swivel castors, 2 lockable Timer for cleaning cycle Water level control Oil separator (skimmer) attachment kit See Figure 7 The oil separator (skimmer) extends the service life of the cleaning solution considerably. If the cleaning solution has settled, for example overnight, the oil that has been added floats to the top. The skimmer can now be switched on to remove this oil from the cleaning solution. Specifications Technical data: Pressure (bar/MPa) 1.5 / 0.15 Flow rate (l/h) 4500 Connected load (kW) 5.5 Working diameter (mm) 600 Usable height (mm) 310 Housing / frame stainless steel (1.4301) Tested (by) according to CE Heating power (kW) 4.5 Max. temperature (°C) 80 Adjustable cleaning time (min) 1 / 30 Nlodpfxsfu Ikwe Ah Ujk Payload (kg) 130 Sound pressure level (dB(A)) 65 Tank capacity (l) 100 Number of current phases (Ph) 3 Frequency (Hz) 50 Voltage (V) 400 Dimensions (D x W x H) (mm) 1080 x 1000 x 1250 Very few operating hours as can be seen in the photo. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Nljdpji Rphgjfx Ah Uek Body: for grader, 6 cylinder engine no. 53A6019 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, total power requirement:6,5 kW Nledpfx Ahscxxp Uo Uek dimensions of the machine ca.:0,9 x 0,5 x 1,25 m

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom. Njdpfx Asgau Uqsh Uelk

Condition: ready for operation (used), Year of construction: 2015, Tandem roller Bomag BW 100 AD-5, year 2015, 2941 operating hours, 3 cylinders Kubota Diesel, weight 2662 Kg, edge cutter with 2 cutting blades, front drum was renewed, ser.no.101880191338 Nlodpfsidqp Njx Ah Uok

Year of construction: 2012, condition: as good as new (ex-display), machine/vehicle number: 06TVX, Carlyle/Carrier Screw Compressor 380/690V/60hz Nedpfxeflflqs Ah Uslk Swept Volume: 1140m3/h. Cooling agent: R134a electr.Cap. 168KW