Attachment block broom - SweepFix

Weber Baumaschinen und Fahrzeuge GmbH KehrFix Anbaublockbesen von 1,50 bis 4 m

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg Dsdpsqt Dmyjfx Abuscc - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the Marker Arburg and the type 320S 350-60 Year of construction: 2000 Operating hours automatic: 83000 Screw diameter: 25 mm Clamping force: 350 kN Dcsdpfx Ajhhuq Aobuoc Barrel length: 60 On request, transport can be organized throughout Europe for an additional charge. Price incl. VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2022, FL -3rd Hydr. working group / Dcodett Aqiepfx Abuoc

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery Dsdellvr Djpfx Abujcc - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Dcjdpfsgd Uifox Abuoc Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: excellent (used), Year of construction: 2023, operating hours: 106 h, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, power: 185 kW (251.53 HP), gearing type: automatic, fork length: 3,000 mm, color: red, Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Overall height: 370 cm CE certification: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000 KG at 120 CM SHORT WHEELBASE = 475 CM FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM Dcsdpsv Hn D Eofx Abuoc FRONT AND REAR VIEW CAMERAS TIRE PRESSURE MONITORING CENTRALIZED LUBRICATION LED LIGHT PACKAGE CHASSIS / BODY: - Towing pin - Steps with slip protection - Rearview mirrors mounted left and right on the front fenders - Heavy-duty and protective fenders CAB: - EGO cab - Clear and hardened safety glass, thickness 6 mm - Clear windows including sliding windows in the left and right doors - Full doors with locks left and right - Complete control system on right console including light control, rotary dial for display, levers for load handling system (electrically adjustable, 2-way) - Multifunction lever on left side including horn, indicators - Braking system with pedal left and right - Cabin comfort including mirrors, handles, interior lighting, etc. - Wipers and washers for front/rear and roof window - Hydraulic steering with electrically height-adjustable steering wheel, manual fore-aft and lateral adjustment with steering knob - External reverse lights - Tiltable operator’s cabin - Step handle, left - Automatic heating and ventilation (ECH) with fresh air filter - Speed control pedal right - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, indication; engine and transmission temperature; engine oil pressure; battery voltage; clock and date; operating hour counter; service interval display; speed; engine RPM; various popup information; AdBlue display STEERING SYSTEM: - Kalmar steering axle, including double-acting steering cylinder DRIVE TRAIN: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic increase of engine speed when using the load handling function - Standard tilt angle 5F/10B ELECTRICAL SYSTEM: - 24 V electrical system - Rear and brake lights, LED - Working lights on front fenders, LED - 2 mast working lights - Turn signals including hazard lights, LED - Main power switch WHEELS: - Michelin 16.00x25

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine Dcedpfx Abeuzht Touec

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg Dcedjignt Uspfx Abujc ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster Dodpfx Abshturcjuscc to test under power ! option: warranty, setup, training

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet! Dcsdpfjhrnbksx Abujc