Telescopic handler

Weidemann Teleskopradlader T 4512

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm Prjdpfx Aefxw H Aodied - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch - Potentiometer for infinitely variable speed control

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered) Prodpfxjdyah Sj Adijd

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece weight (max.): 12,000 kg, total height: 48,500 mm, total length: 85,800 mm, total width: 56,000 mm, table width: 2,400 mm, table length: 3,020 mm, overall weight: 20 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 960 mm, spindle nose: ISO 50, tool length: 350 mm, tool diameter: 127 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gantry vertical machining centre "AWEA LP-3025" with HEIDENHAIN TNC 640 Prodpfjrl Svrjx Adijd

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Basic Equipment / Technical Data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to tool carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg - Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversible fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive - Pump: electronically controlled with variable displacement - Motor: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral hydraulic oil HVI 46 - Transmission: 2 gears, electrohydraulically controlled - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap belt - ROPS/FOPS-certified - Heating - Front, roof and rear windshield wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector switch - CS = hydropneumatic cab suspension Telescopic Boom - 2-part telescopic boom with electronic end position damping (Soft Stop) Attachment - Quick coupling system type "ZM2", hydraulically controlled from the cab Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle fixed - Rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels, automatically acting parking brake when the engine is off Chassis - High-strength steel frame design Hydraulic System - Load Sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min Pedpeuycgfsfx Adierd - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stabilisation Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition, and overload shutoff Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo-assisted brake - Hydraulic oil cooler - Rear mounting plate for trailer hitch (AHK) - Hydraulic reversible fan - Radio pre-installation - Work lights on cab (2 front, 2 rear) - Preparation for additional function at boom head - 2 hydraulic connections at boom head - Load protection grate on tool carrier - Lighting for road use - Automatic battery main switch - Electric connection cable in boom - Acoustic warning signal when reversing - Boom support cylinder for securing Optional Equipment - EU approval as tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights at base of first boom section - ASC

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Tyres 31x15.50-15 X-TRAC (machine width 160 cm) * 1st and 2nd auxiliary circuits (DW) operable via proportional slider on the joystick forward * ROPS cab incl. air conditioning * Reversible fan * 4-wheel, 2-wheel, and crab steering * Air-suspended, adjustable comfort seat * Additional halogen work light at the front of the lift arm * Rear counterweight plate 180 kg incl. shunting coupling * Battery 100 Ah * Quick coupler Predpfx Ajw Hxugsdiod * Earthmoving bucket 1600MM * Pallet fork 1200MM

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Prjdpfxevdal Aj Adisd Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. VAT is not needed if the sales happen outside of Turkey. Prsdpfx Adovtancsied

Year of construction: 2024, condition: used, General information New: Yes Technical information Power: 95 kW (129 HP) Chassis type: rigid Empty weight: 7.682 kg Prsdpsrkkrfjfx Adiod Make of engine: Deutz Top speed: 40 km/h Functional Lifting capacity: 3.500 kg Lift height: 608 cm Other information Rental currency: EUR Production country: FR Additional information Please contact Jan De Lepeleer for more information

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME Pedofv Awhepfx Adijrd - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: new, functionality: fully functional, Year of construction: 2025, The ASCO® SD MINI screening drum features a foldable design and is a semi-mobile unit. Equipped with a vibration motor, it is particularly practical for recycling operations, as well as in the construction, agricultural, and gardening sectors where many different materials need to be processed. The innovative mobile trommel screen from ASCO®Screen. The variable height adjustment makes it easy to handle and transport. Screening a variety of materials is effortless, whether you load the machine manually or with the help of an excavator. In both cases, the screened material can be transported via the conveyor belt after the process. The screened material is distributed over and under the entire length of the drum, while oversized material is ejected at the rear of the machine. Efficient processing of various materials in recycling operations. Economical use in construction, agricultural, and gardening operations where space is limited. Pedpfx Adsr Nbxyeiord Flexible use thanks to numerous adjustment options. High performance and capacity for impressive screening performance. Versatile material separation of coarse particles, shavings, compost, soil, bark mulch, pellets, wood chips, gravel, building demolition materials, and plastic. Technical Specifications: Screen length: 1.49 m Usable screen length: 1.25 m Outer diameter of the screen drum: 0.8 m Usable screening area: 3.15 m² Screening capacity: 5 - 40 t/h Mesh size: Ø4 - Ø100 mm Hopper opening: 1600 x 760 mm Bucket width: 1.5 m Speed (adjustable): 5-20 rpm Drive power: 400 V / 2.2 kW Filling height: 1.5 - 1.86 m Weight: 600 kg Highlights: - Vibration motors for emptying the hopper - Three different drum versions - Drum rotation in both directions - Cleaning brush - Easy drum replacement - Single-wheel drive - Hour meter - Adjustable height / supports with wheels and without wheels