Shredder

WEIMA WLK 1500

Condition: used, Year of construction: 2020, operating hours: 4,930 h, functionality: fully functional, machine/vehicle number: 510-3888, rotor diameter: 370 mm, number of blades: 82, power: 75 kW (101.97 HP), WEIMA WLK 1500 / 75 kW V-Rotor Industrial Shredder Suitable for Paper, Wood, Plastic, Metal (Swarf), Textiles and General Waste Processing Summary Heavy-duty WEIMA WLK 1500 industrial shredder with a 75 kW V-Rotor, suitable for continuous processing across multiple waste streams including paper and cardboard, wood and biomass, plastics, metal swarf, textiles, and general waste reduction. The machine is supplied complete with its associated extraction unit. Key Specifications • Manufacturer: WEIMA • Model: WLK 1500 • Rotor Type: V-Rotor • Installed Power: 75 kW • Cutting Chamber: 1500 mm working width • Material Suitability: Paper, cardboard, wood, plastics, metal swarf, textiles, mixed waste • Feed: Conveyor-compatible • Running Hours: 4,930 hours • Condition: Operational and available for inspection Included with the Machine • New, unused replacement blade set • Dedicated extraction unit (multi-port extraction with collection bags, as shown in photos) Inspection and Condition This machine was originally purchased from Fercell. A recent inspection by Fercell identified several maintenance and condition items, which have been fully considered within the selling price. Inspection Findings • Hydraulic hose leaking • Screen door switch damaged • Screen door handle missing • Screen doors modified for reverse Ram operation (recommended to return to factory specification) • Control panel isolator switch damaged (replacement recommended – panel currently remains live/on) • Hopper dog box damaged (replace if required) • Rear hydraulic door – two damaged threads requiring repair • Hydraulic oil low due to hydraulic hose leakage (full service and oil top-up recommended) Full inspection notes can be provided to interested buyers. Kdjdpfx Aox Eklnoddjg Applications • Paper and cardboard recycling • Wood recycling and biomass preparation • Plastic recycling and re-processing • Metal swarf reduction • Textile destruction and processing • General waste management and volume reduction Condition and Viewing • Operational condition • Available immediately • Available for inspection by prior arrangement Decommissioning and Removal Buyer to arrange full decommissioning, disconnection, dismantling, lifting and removal of the equipment. Seller will provide reasonable site access for inspection and collection. Additional Items Available (separate cost) Outfeed Incline Conveyor (1.75 kW) – Heavy-Line PVC Belt “L-Type” Conveyor Industrial conveyor transferring shredded material from the shredder to the extraction system. Key Features: • Durable PVC belt • L-shaped elevation design • Steel frame • Adjustable discharge height Price: £9,000 Screen Insert – WEIMA WLK 1500 (30 mm, t = 10 mm) Spare classification screen for controlling shred size from the WLK1500 shredder. Key Features: • 30 mm hole pattern • 10 mm heavy-gauge steel • Improves consistency of final product • Quick installation Price: £1,000 Pricing • WEIMA WLK 1500 Shredder with extraction unit: £55,000 (€62,960) • Outfeed Incline Conveyor (optional): £9,000 (€10,300) • Screen Insert (optional): £1,000 (€1,445) Reason for Sale Business closure. Location Haverhill, CB9 8QP, United Kingdom

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! Ksdpfjxzfqbex Addedg • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: ready for operation (used), Feature Specification Rotor Size φ ≈ 370 mm × 1500 mm Rotor Speed 80–125 rpm Knife Count Up to 123 (V‑rotor) Kedpfx Aew A I Tdjddodg Power 75–90 kW (electromech); up to 110 kW Infeed Opening 1500 × 1890 mm Weight ~6400 kg Output Particle Size 15–100 mm (exchangeable screen) Drive & Bearings WAP gearbox, sealed bearings Control Siemens PLC Discharge Belt / screw / suction available Applications Plastics, packaging, wood, fibre, etc.

Condition: good (used), Well-maintained horizontal creel. Passage 1000 mm. Stroke 800 mm. Kdjdpfx Asunhl Ujddjg Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Can still be inspected in operation.

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles Kodpeu Nw Ezsfx Addedg voltage: 400 / 50 V / Hz total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm *

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Kdsdpfevwlqqsx Addjg Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2023, condition: new, ‼️BLACK FRIDAY OFFER‼️ RECEIVE A €500 DISCOUNT WHEN YOU COMPLETE YOUR PURCHASE‼️ OFFER VALID UNTIL SATURDAY, 29.11.2025‼️ We have shredders and other recycling machinery in stock in Heilbronn for all types of recycling. From copper recycling to plastic recycling, you can purchase all machines from us. Feel free to inquire. ‼️CAN BE INSPECTED ON SITE‼️ We would be happy to demonstrate the machine to you live in Leingarten! By appointment only! We are based in Heilbronn—a German company, operating under German laws, with warranty and service! We also speak English! Professional copper recovery from cables ranging from 1.5mm to 120mm made easy! ➡️Supplied with accident prevention certification (UVV) from a German company Our cable stripping machine Josan S120! ▶️Weight approx. 236 kg This allows you to recycle cables quickly and cost-effectively and obtain pure copper. Very high processing speed. Powerful 3 kW motor. Built for durability. View detailed images of the machine or inspect it live at our site in Leingarten (by appointment only). Net price: €3,999.00 +19% VAT: €759.81 Kodpop E Einsfx Addsdg Gross price: €4,758.81 Since we also do recycling ourselves, we can demonstrate our machines to you by appointment. CE-certified machines from us. ‼️For further questions, please contact us! We can only respond if you provide your name, address, email, and telephone number. Otherwise, your inquiry may be filtered as spam. We will get in touch and provide you with preliminary advice!‼️ Specifications/features/prices subject to change. Errors excepted.

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES Kodpfx Aeghgdveddedg 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 208 h, functionality: fully functional, RS-F-8 flexo press designed to produce high quality labels and lML labels (optional) in high speed. 1000mm large size servo motor controls the unwind device, which can make the paper run smoothly and the end stop automatically Compact machine and extremely short paper paths reduce material waste .The whole machine adopts servo system, including unwind unit, two traction rollers, 8 printing units, 1 set of die-cutting unit, wasteremoval unit, 1 set of crush knife, 1 set of shear knife. Kdsdpfxowb Shce Addeg The full servo driven design makes the tension of the material stable and smooth Large roller of diameter water-cooled roller, paper path has a larger wrap angle, the printing roller and water-cooled roller are integrated, the operation is more stable, the cooling is faster, and the running speed is relatively faster.

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins Kdjdetziudopfx Addeg • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.