Oil burner

Weishaupt L3Z/A Ölbrenner 65kg/h Weishaupt L3Z/A Ölbrenner

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Gbsdpfomdpczjx Abueh Version ZMD Power 300 - 1750 KW Including gas line ( gas fitting ) Burner was recently in operation

Condition: excellent (used), Year of construction: 1996, pressure: 13 bar, operating pressure: 13 bar, 1 used steam boiler ----- Make: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 53 m² Output: 3,200 kg/h Max. operating pressure: 13.00 bar Increased test pressure: 24.05 bar Water capacity at low water level approx.: 2,650 l Water capacity when full approx.: 3,770 l Year of construction: 1996 Equipped with a Weishaupt gas/oil combi burner, gas control system, Godov I Rpaopfx Abuebh control cabinet mounted on the boiler body, feedwater pump, and the existing coarse and fine valves.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 02/2027, type of input current: three-phase, nominal power: 2 kW (2.72 HP), input frequency: 50 Hz, year of last overhaul: 2024, space requirement height: 500 mm, space requirement length: 660 mm, space requirement width: 950 mm, Modell TS 38 plus Kreismessermaschine Tischmaschine Edelstahl Ausführung, Messer neu geschliffen und beschichtet manuelle Bedienung Scheibendicke von 3 - 20 mm einstellbar Maße: 950 x 660 x 500 mm, BxTxH Brotmaße max: 370 x 200 x 160 mm L x T x H DGUV V3 gepruft Anschluß 400V, 16A-CEE Stecker Gebrauchtmaschine gereingt Gedpepyglmefx Abusbh mit 6 Monaten Gewährleistung Weitere TOP Bäckereimaschinen am Lager!

Year of construction: 1987, condition: good (used), functionality: fully functional, Asitrade Singlefacer E-Flute and B-Flute Gsdpfxetxlv Ho Abuebh Year: 1987 - completely overhauled in 2019 Unwinder: 6-stations Max. working width: 1410 mm Max. speed: 150 m/min Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control Gsdpfx Aegwt S Tobuebh • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Gbsdpferz Nflox Abuoh Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 2017, Overview  The steam generator was built in 2017 by the German manufacturer Certuss. It is fired with gas and can deliver up to 300 kg/h. The unit was used in a German brewery. Was in operation till June 2025. Still assembled but disconnected from the gas pipe. Unit was only used once in a week during brewing, therefor the working hours are low. Technical specifications  Steam production max.: 300 kg/h Powered by gas Operating Pressure: 10bar Accessories  Filter Condensate recuperation Godpfx Aswwaxzsbusbh

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Gsdst Hwupepfx Abuebh Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: excellent (used), Year of construction: 2005, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: U-HD 800 Heating surface approx.: 14 m² Previously operated with: 640 kg/h Permissible operating pressure: 13 bar Gedpfjwwt D Dsx Abusbh Increased test pressure: 24.05 bar Water content at normal level approx.: 748 l Total water content approx.: 1,108 l Year of manufacture: 2005 CE marking: CE 0036 Equipped with Weishaupt combination burner gas & oil type GL3/1-E, ZMD, gas control section, control cabinet, feed water pump and existing coarse and fine fittings.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: CD1500, CD-1500 VEGETABLE FRUIT DICING MACHINE This cutter is designed for slicing, dicing, and cutting fruits and vegetables like potatoes, carrots, and beets into strips, slices, or cubes. Interchangeable cutting tools allow you to select the shape and size of the cut pieces, ensuring uniform results. Additional tool sets are available for Gbjdpovlwlcjfx Abueh smaller or larger cuts if needed. Vegetables and fruits are fed manually into the hopper, and the cut pieces are discharged into a receiving bin.