Mini loader

Wolf 750 shovel NIEUW

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 143 kg, fuel type: diesel, tank capacity: 12 l, color: black, output current: 12 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 6.8 kW (9.25 HP), continuous power: 6.2 kW (8.43 HP), total length: 730 mm, total width: 500 mm, total height: 620 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with 6,8kW. Three-phase generator Proton 3 with very low combustion. An added convenience is remote control with remote control. In short, a reliable engine, copper alternator and plugs. Model, with us since the beginning of the company. Generator perfect for construction sites. ABBREVIATION: Genset type: Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 400V Rated power: 400V - 6200 watts (7.7kVA) Maximum power up to 15 minutes - 6800W (8.5kVA) WEIGHT: Gross weight: 143kg FUELING: 1.0 liters per hour (at 70% of maximum power) 1.2 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 188FA-D Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 456 cc3 (88x75) Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.6l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 180-CAVR-400 Rated current (400V) - 12.3 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 Ljdpfx Aetrmc Rsh Ushr CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 84dB (measurement - 5m, open space) Fuel tank capacity - 12 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 3 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 50 cm Length - 73 cm Height - 62 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric, Manual (from a cord) Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: used, mileage: 228,283 km, power: 100 kW (135.96 HP), first registration: 10/1997, fuel type: diesel, overall weight: 7,500 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro1, Equipment: all wheel drive, * Mercedes Unimog 1400 4x4 * 3-way tipper * All-wheel drive * Dual-range gearbox * PTO front and rear * Manual transmission * VIN: WDB927102W172198 * kW: 100 * Displacement: 5958 cc * Unladen weight: 4500 kg * Gross weight: 7500 kg * Wheelbase: 2620 mm * Vehicle length: 4390 mm Lodpfx Ahownwawe Ushr * Vehicle width: 2300 mm * Vehicle height: 2980 mm * Net price * All information without guarantee Tel./WhatsApp:

Condition: used, mileage: 170,066 km, power: 70 kW (95.17 HP), first registration: 11/1977, fuel type: diesel, overall weight: 6,800 kg, color: grey, gearing type: mechanical, Equipment: all wheel drive, Engine: Mercedes Benz Euro 0 KM status according to speedometer Gearbox: 8-speed manual with 16-speed reduction Seats: 1+1Trip side tipperAvoid weight 4500 KG / total weight 6.800 KGExterior trailer coupling / drawbar load 1250 KG * Power steering * Driving window with windshield * Sun visors * Roof hatch Miscellaneous Front hydraulics Front PTO * Rear PTO * All-wheel drive with locks * Hydraulic Schmidt snow blade * Additional headlights * Air brake system * German vehicle documents Lhodpfx Ahjrmlpzo Usr * Vehicle dimensions: Length: 4.54m, width: 2.19m, height: 2.63m * Tires: VA: 40%, HA:30% Our internal vehicle number: 7608Errors excepted. Pictures and text may differ from the vehicle. Constantly over 180 vehicles on offer.

Year of construction: 2025, condition: new, machine/vehicle number: 747924113, Dipperfox SC600 - the new standard for urban greening. The Dipperfox product family is growing with the new addition - the baby Dipperfox, called SC600. As an original, the Dipperfox 850 Pro is the world's most effective stump removal machine for large excavators, for use in construction and forestry. Our SC600 model carries the performance, but can be be adapted for smaller carriers. The DF600 is a tool for people in cities, municipalities, arborists, and gardens - Where full size crawler excavators are too big to use. The main advantages compared to conventional stump grinders are safety, noise level and efficiency. Because Dipperfox's rotation speed is a maximum of 60 RMP, there are no flying debris Lhodelqak Djpfx Ah Ujr and if the blade hits the rock, it is simply pushed away. No need to create large Safety zones to get the job done. And as a true member of the Dipperfox family, the SC600 does does the same job, but much faster compared to vertical grinders. It can also be used to work up to half a meter below the ground. It is very useful when you need to plant a new tree in the same same place where the original stump was located. Dipperfox SC600 is a multi-carrier tool suitable for the following: * Backhoes between 6 and 14t * Backhoe loaders from 6t * Skid steer loaders and compact track loaders from 6t * Hydraulic pressure 170-280 bar and 65-150 l/min Further information Equipment: shears, Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: new, Year of construction: 2025, Machine characteristics Our electric pallet truck with a capacity of 1,500 kg is an irreplaceable solution that allows you to easily and effectively move heavy pallets and loads in warehouses, production halls and other logistics places. Thanks to advanced electrical technology, both lifting and driving are easy and convenient. The electric lifting system allows loads to be lifted smoothly to the appropriate height, ensuring precision and safety. However, electric driving eliminates the need for physical effort and allows efficient and quiet operation. A pallet truck with a capacity of 1,500 kg is not only efficient, but also reliable. Solid construction and high-quality materials guarantee long-lasting and reliable operation, even in difficult conditions. Thanks to this, you can be sure that the stroller will cope with even the most demanding tasks. Our solution has many advantages, including an ergonomic design that ensures comfort and convenience for the operator. The intuitive control panel allows you to easily maneuver and adjust the driving speed to your needs. The built-in speed control potentiometer is an innovative feature that allows the operator to adjust the travel speed to specific needs. This allows you to precisely control the pace of the trolley's movement, increasing safety and eliminating the risk of collision or damage. Regardless of the size of the warehouse or how crowded it is, our electric pallet truck ensures smooth and precise maneuvering. Operators can easily maneuver around curves, avoid obstacles and precisely place loads where they are needed. This increases work efficiency and saves valuable time. Safety is our priority. Our electric pallet truck is equipped with safety systems such as electromagnetic brakes, a belly switch, horn and protective features that minimize the risk of accidents and damage. One of the key features of our pallet truck is the use of an easily replaceable battery. This way, when the battery runs out, you can easily pull it out and connect it to the charger. This saves time and allows you to work continuously without having to wait for the truck to be fully charged. Practicality and mobility are key in a dynamic warehouse environment. The flap protecting the battery against weather conditions is another innovative feature of our pallet truck. It protects the battery against moisture, dust and other external factors, which increases its durability and reliability. You can rest assured that your battery is properly protected, even in difficult operating conditions. Technical parameters Load capacity 1500 kg Turning radius 1300 mm Height of raised forks 190 mm Height of lowered forks 85 mm Fork length 1150 mm Fork width 550 mm Wheel diameter 80/210 mm Battery voltage/rated capacity 24/20V/Ah Li-ion Operating time on a charged battery up to 3 hours Charging time 2.5 hours Drive motor power 0.75 kW Lifting motor power 0.8 kW Electromechanical brake Travel speed with/without load 3.5 / 4.5 km/h Weight 130 kg Ljdpsricvdofx Ah Ujhr Dimensions 1700x550x1300 mm

Condition: new, Year of construction: 2025, functionality: fully functional, conveyor belt length: 3,000 mm, conveyor belt width: 600 mm, conveyor belt speed: 1,350 mm/s, total length: 3,400 mm, total width: 1,000 mm, total height: 820 mm, overall weight: 565 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, The ASCO® CB 3000 conveyor belt is a robust and powerful conveyor belt for a wide range of conveying applications. Designed for long service life and easy maintenance. Highlights of the machine: - Operating hours counter - Simple belt and angle adjustment - Length extension Lsdpfx Astuk Scoh Uohr Technical data for the CB 3000: Speed: 10 - 135 cm/s Capacity: 20 - 120 m3/h Width of the belt: 0.6 m Hopper length: 0.8 - 1.6 m Hopper capacity: 0.2 - 0.5 m3 Drive power: 400 V / 2.2 kW Weight: 565 kg Width: 1.3 m Length: 3.4 m Height: 0.82 m

Condition: new, machine/vehicle number: NEW-17, empty load weight: 635 kg, maximum load weight: 2,835 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,680 mm, loading space height: 300 mm, Year of construction: 2024, Equipment transporter, braked tandem low-loader with hot-dip galvanized steel drop sides, very robust, hot-dip galvanized and welded steel frame, 12 tie-down points as standard in the loading area at the side and front, 6 lashing hooks as standard outside the loading area, 13-pole electrical system, automatic jockey wheel plus vehicle registration document and freight to Gera € 250 net Optional accessories at extra cost: lattice ramp between access rails, shock absorber for 100 km/h approval, side railing with H-frame Financing / leasing possible Ljdpfxoghpb Ds Ah Ushr Pictures exemplary!

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Kubota engine 18.2 kW * Operating weight 2,100 kg * Lifting capacity 2,260 kg Ledjw Hxtiepfx Ah Uehr * Tyres 27x10.50-15 SKID (machine width 116 cm) * 1st auxiliary circuit (DW) proportional on joystick incl. continuous operation * ROPS cab including heating/2 mirrors/2x halogen work lights front & rear/radio – mechanically suspended, adjustable comfort seat with seat belt + armrest * StVZO package up to 20 km/h * Road lighting (halogen) * Mudguard extensions * Rear counterweight plate (90 kg) incl. shunting coupling * Standard bucket 1,200 mm wide and pallet forks 1,000 mm

Condition: new, empty load weight: 570 kg, maximum load weight: 2,130 kg, overall weight: 2,700 kg, loading space length: 2,920 mm, loading space width: 1,520 mm, loading space height: 350 mm, tire size: 195/50R13C, Car trailer for transporting construction machinery from trailer manufacturer TEMARED model Builder3-3015/2S 2700kg. The standard equipment of the construction machinery trailer is a stable frame, drive-over flap, bucket support support wheel and a V-drawbar. This machine trailer is also available in other dimensions. We also offer accessories for excavator trailers such as tool box, lashing straps, drawbar protection cover and anti-theft device at a reasonable price. Lhodpfx Aeq Ecvdoh Uor

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,740 kg, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, standard shovel, The H&R 1507T telescopic wheel loader is our smallest telescopic yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507T telescopic loader lifts loads of up to 700 kg to a height of 2.82 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507T loader reaches speeds of approximately 16 km/h and is comfortable to drive. The additional hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507T Telehandler • Technical and visual optimization in-house • Efficient engine made in Germany • Telescopic boom for greater reach • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant (EU Machinery Directive) and approved by the German Road Traffic Licensing Regulations (STVZO) • 1-year spare parts warranty Price Net: €17,710.00 VAT: €3,364.90 € Gross: €21,074.90 Financing available! Optional 2-year warranty €590 net Pallet fork €650 net TÜV (road approval) €870 net Transport to Germany / Austria upon request Technical specifications Lifting capacity: 700 kg Lift height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) Lsdpfxov T T N To Ah Uehr All-wheel drive, speed approx. 16 km/h Dimensions: 3805 x 1160 x 2235 mm Weight: 1740 kg Tires: 26 x 12.00-12 Turning radius: 4.3 m Accessories and Spare parts are available from us. Please provide your phone number when you inquire!