Pile driver

Yanigav HS3 / HSG3

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 159,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle * First owner * Condition, see photos * Original: only 8,682 operating hours * Front and rear PTO * Municipal hydraulics at the front and rear * Front mower * Mulag boom MRS300 Ljdpfjvhqbcox Afwsaf * Mulag verge mowing head RMK1200 * Rear mower * Mulag rear boom MHS800 * with Mulag mowing head MK1200 * Municipal and rear hydraulics * Rear linkage * Mulag verge mowing unit MRS 300 * Ideal for mowing in areas near roads, operating on the left and right sides * 3-point attachment to the front linkage * Reach up to 3.00 m * Drive via front PTO * Control: electro-hydraulic * Mowing head relief * Distance-dependent feeler automation * Verge mowing head RMK 1200 * Working width 1,200 mm * Telescopic rear boom mowing unit MHS 800 * Lateral displacement 1,600 mm * Reach, left and right 8.70 m * Automatic ground sensing * High portal for driving over obstacles up to 3.90 m * One-hand control panel with multi-function lever * Quick-change device * Mulag flail mowing head MK 1200 * Overall width 1,580 mm * Boom utilization * Comfortable cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfortable driver's suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * All-round warning lights * Wide-angle warning beacons * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Top speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg * LOF approval * In the event of a sale to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that no false impressions arise regarding their condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicle. Subject to change, prior sale and errors.

Condition: new, Year of construction: 2026, CORMAK 330 × 915 Universal Lathe is a professional conventional lathe designed for precision machining of a wide range of materials, including carbon steel, stainless steel, and non-ferrous metals. With its rigid construction, 2-axis Digital Readout (DRO), and comprehensive standard equipment, this universal lathe is an ideal solution for toolrooms, maintenance workshops, repair facilities, and technical training centers. Key Features Rigid construction with a 160 mm wide bed provides excellent stability, vibration resistance, and machining accuracy. 2-axis Digital Readout (DRO) with optical scales on the longitudinal and cross axes improves positioning accuracy and process control. 38 mm spindle bore allows machining of larger-diameter shafts and bar stock. Lasdpfsm Nb Srsx Afwsf Precision carriage assemblies with 0.1 mm / 0.5 mm graduated handwheels ensure accurate and repeatable feed movements. Automatic longitudinal and cross feeds increase productivity during repetitive machining operations. Wide threading range – metric threads from 0.25–7 mm and imperial threads from 4–120 TPI without the need to change change gears. 1.1 / 1.5 kW induction motor delivers high torque and reliable performance during continuous operation. Integrated coolant system and 2-axis DRO supplied as standard improve operator comfort and machining efficiency. Construction and Technology The CORMAK 330 × 915 features a modern drivetrain with a headstock gearbox equipped with hardened and precision-ground gears, ensuring quiet operation, high durability, and long service life. The induction-hardened and precision-ground guideways maintain their geometry and accuracy even after years of intensive use, providing consistently high machining precision. Precision and Performance The lathe offers excellent carriage positioning accuracy, while the offset-adjustable tailstock enables precise taper turning. The swivelling compound slide allows accurate machining of angled surfaces and complex profiles. The Digital Readout (DRO) provides continuous position monitoring, improving accuracy and minimizing operator errors. Technical Specifications Specification Value 3-jaw chuck 160 mm Swing over bed 325 mm Swing over cross slide 208 mm Distance between centers 915 mm Maximum workpiece length 830 mm Bed width 160 mm Spindle bore 38 mm Spindle speeds 12 ranges, 65–1650 RPM Spindle taper MT5 Tool post dimensions 78 × 78 × 20 mm Maximum tool size 16 × 16 mm Top slide travel 100 mm Cross slide travel 153 mm Longitudinal carriage travel 750 mm Metric thread range 0.25–7 mm Imperial thread range 4–120 TPI Longitudinal feed rates 0.087–2.218 mm/rev Cross feed rates 0.019–0.471 mm/rev Tailstock quill travel 75 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Main motor (S1/S6) 1.1 / 1.5 kW, 400 V Coolant pump power 40 W Machine dimensions (L × W × H) 1770 × 740 × 1600 mm Weight 390 kg ±2% Standard Equipment Precision MT3 live center Fixed steady rest Follow rest Machine stand 2-axis Digital Readout (DRO) with optical scales 160 mm 3-jaw chuck External jaws MT3 dead center Factory-installed change gears Coolant system Oil can Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Lsdsdf Ud Sspfx Afwoaf Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: used, Year of construction: 2024, operating hours: 455 h, power: 148 kW (201.22 HP), maximum speed: 50 km/h, overall weight: 7,000 kg, front tire size: 540/65 R30 | 0%, rear tire size: 650/65 R42 | 0%, maximum load weight: 7 kg, tire size: 650/65 R42, operation weight: 7,000 kg, number of beds: 30, Tire size (front): 540/65 R30, tire size (rear): 650/65 R42, operating hours: 455, initial registration: 05.12.2024. Basic equipment/technical data: ENGINE Maximum power: 132/180 kW/hp (ISO 14396) Ledpfx Aewmbg Sefwsaf Maximum power with power management: 155/210 kW/hp Maximum torque: 750 Nm, with power management: 860 Nm Registered power: 148 kW (ISO 14396) Maximum power at the power take-off: 114/155 kW/hp (OECD) 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V Exhaust aftertreatment with DOC - Diesel Oxidation Catalyst, SCR 3rd generation & Diesel Particulate Filter Exhaust emission standard: Stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt pre-cleaning EasyCare cooling package 305-liter fuel tank

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Ledpfx Afjtkuk Rjwsaf

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm Lsdpjw Stndjfx Afwsaf POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Ljdpfx Afevw Upcjwoaf Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation Ledoupw R Aopfx Afwjaf • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Ledpfx Asxabiwefwoaf Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, Year of construction: 2026, Yanigav pile driver MPEV500 • Weight: 250 kg • Dimensions (LxWxH): 0.60x1.00x1.30 m Lsdpfx Afer Ezf Nowjaf • Blow frequency: 560-1600 blows per minute • Impact energy: 170 joules • Bell inner diameter: 80-120-140 mm • Hydraulic requirement: 30 l/min, 140 bar pressure