Shredder

ZERMA ZXS 1500

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Iiedpfxoyr Twro Aa Isa Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Iedpsu Tg I Dsfx Aa Ieia Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Year of construction: 2022, condition: ready for operation (used), System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw length: 3000mm, conveying speed: 24m/min, drive power: 2.2kW, 3) Lifting-tilting device, with safety guard and safety light curtain, lifting capacity: approx. 500kg, tilting angle: 150°, discharge height: approx. 3390mm, container length/depth: 857mm, container width at discharge edge: 1060mm, container height: 916.5mm, container clearance height: approx. 255mm, container weight: approx. 135kg, max. container weight with product: 500kg, container volume: 0.5m³, lifting and discharge speed: 6.6m/min, motor power/rated current: 1.5kW/4.95A, transport chain: 2 pcs., safety chains/chain break protection: yes, chain breaking force per strand: 70,000N, operating hours reading: approx. 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible. Iedox Dm A Ropfx Aa Isia

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - 450 kW DC power – with ABB frequency inverter including DTC control - Bevel helical gear unit – roller speed up to approx. 32 rpm / variable via belt drive and inverter control - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Infinitely variable speed control - Tooth type: form C3 trapezoidal tooth, 174 mm - Wear-resistant armor plates on the roller - Hydraulically adjustable counter comb – cutting gap adjustment via display - 4 comb cylinders - Central lubrication system - Hydraulically opening comb hatch - Pre-assembled main control cabinet - Local operator panel at the machine - Start-up warning system - Engine compartment lighting - Paint finish: RAL 2011 deep orange Iisdpfx Aox I A Akja Ioa The machine is equipped with the following additional features: - Mounting strip for limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine frame height: 1,200 mm - 3-sided hopper extension, left or right - Flashing light module - Solenoid valve for water spraying device - Radio remote control (EU) - Profibus integration - 2 additional power outputs on the control cabinet, up to 7.5 kW each - Control cabinet container / air-conditioned, LxWxH 5,000x2,400x2,600 mm The machine can receive comprehensive reconditioning at our factory upon request. - OPTIONAL ONLY: Discharge conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Miscellaneous: - Display in German; English available - Stickers and operator panel labeling in German; English available - Warning stickers in German; English available - Operating manual in German (print and digital) (can be translated for local requirements)

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490 mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900 mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700 mm ZXS Series: The single-shaft shredder for demanding shredding tasks. The machines are built extremely robust and deliver high throughput rates. Working widths from 1500 to 3000 mm and a rotor diameter of 750 mm are available as standard. Wide range of applications for the ZXS series: Iodpfxsyr Tf Aj Aa Ioia Many other materials can be shredded and prepared for recycling with the ZXS series, such as old cables, PET bottles, paper and cardboard, etc. Let us advise you on how your material can be shredded and recycled.