Concrete Block Production Machine

ZİM Mühendislik ZIM 1025

Condition: new, Year of construction: 2018, functionality: fully functional, Hello we offer here a brand new climate outdoor unit from Toshiba. Itodslc Eukopfx Ah Uer The device was built in 2018 but was never installed. The device has 45kW.

Year of construction: 2022, condition: new, This system operates in automatic mode. The transfer of pallets between production line and curing area is carried out by Finger Car. 1 operator supervises the production process via control panel equipped with 4 different monitor, pc system. Automation system software has user-friendly interface and can be translated into customer’s preferred language. Production line requires the construction of curing chambers with racks. Steam curing is recommended for working in one shift and is mandatory for working in two shifts. Ijdpfx Aoibcycsh Uetr Transfer of production pallets with green products to the curing chambers as well as the transfer of pallets with cured products to the cubing station is carried out by automatic pallet transport system known as Finger Car. Finger car consists of lower and upper electric trolleys, which move along a set of rails built perpendicularly to the concrete block production line. The upper trolley has steel forks for grabbing and holding pallets. It transfers concrete products to the curing chambers, going inside each chamber to place pallets with wet products on racks to cure. On its way back it takes a stack of pallets with cured products and loads it into the lowerator. The price given as 1.200.000 USD includes all the machine equipments, concrete batching plant and 3000 pallet rack system. It is very special offer for August 2022!

Condition: good (used), functionality: fully functional, mileage: 176,525 km, power: 330.97 kW (449.99 HP), first registration: 01/2006, axle configuration: 8x4, brakes: engine braking, gearing type: mechanical, Year of construction: 2006, Equipment: differential lock, ASTRA HD8 8445 year 2006, km 176525, EURO3, with CIFA MK28.4 concrete pump, 28 meter arm, 100 mm pipe, auxiliary engine Itodpevv Hk Nefx Ah Uer

Year of construction: 1985, condition: good (used), COMPLETE COATING LINE WITH THE FOLLOWING POSITIONS: Itjdpok Scufofx Ah Usr 1 HYDROPRIMER SPREADER 2 OVEN WITH UV LAMPS + IR 3 DOUBLE COATER WITH REVERCE 4 UV LAMPS 5 DOUBLE COATER 6 UV LAMPS 7 DMC SANDER 8 CONVEYOR 9 COATING MACHINE TOUCH-UP DYE SORBINI 10 IR LAMPS 11 FINISHING ROLLER 12 UV LAMPS 13 EXIT CONVEYOR

Condition: as good as new (ex-display), Year of construction: 2023, The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum reliability. Internal pump, tank, fan control, low GWP refrigerant R454B. Refrigerating capacity 37 Kw, envious GWP refrigerant R454B Isdjfmd Hhjpfx Ah Uotr We have a lot of chillers directly from stock available used and new . contact us for a no obligation quote. We rent / sell / and also take over the service for all refrigeration systems Germany-wide.

Condition: used, Complete roundwood sorting plant / debarking line / roundwood yard, comprising: - 2-section roundwood infeed (8 chains total) - Log singulator - Infeed conveyor - Log transfer carriage - Bruks butt reducer - Crosscut saw for long logs - Transverse conveyor - Log transfer carriage - Infeed to debarker - Debarking machine CHE Johanson 660 SH Itedpfx Ahexb N U Dj Ujr - Sprecher Automation roundwood measuring SELSCAN 512 (year 2002) - Sorting line - Roundwood bins: 8 bins on the left, 8 bins on the right (with throw-over bins for long logs) - Control cabinets - Control system - Bark drag conveyor Immediately available – located in Austria near Linz

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Other similar roller tables also available. Isdpfx Aet E Nw Tsh Ustr

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Itsdpfxsirtdpj Ah Uer Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, Fully operational block production plant equipped for both concrete and lightweight expanded clay aggregate (LECA) block manufacturing. Currently in use — production process can be demonstrated on site. Key Features: Metalika concrete mixer (2022) with integrated precise moisture sensor Many new moulds available Average production capacity: • 270 m² of pavement blocks per shift • 50 m³ of LECA blocks per shift Technical Specifications: Upper and lower vibration system 1.5 m³ ready-concrete hopper 0.75 m³ mixer with 11 kW motor 8 m³ material bunker Hydraulic power unit Water metering system Precise moisture meter Adjustable/variable production speed Automatic production pallet de-stacking and stacking Pneumatic palletizing gripper Large quantity of production pallets included Itjdpfjwdf U Ujx Ah Usr Current molds in stock (size in mm): Building blocks (LECA blocks): 1) 500x300x200 2) 400x200x200 Pavement stones: 1) 200x100x50 2) 200x100x60 3) 200x100x80 4) 180x120x60 5) 180x120x80 6) 240x60x80 7) 300x300x60+300x150x60+150x150x60 8) 240x240x60+240x120x60+180x120x60+120x120x60+120x60x60 9) 300x300x80+450x300x80 Kerb stones: 1) 800x200x70

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Chain bed approx. 420 mm With spikes in the chain bed Including slat bush and spacer rings Main engine 75kW Itedpeucnudefx Ah Ujr