Electric motor 0.55 kW 2890 rpm

ZSE MEZ 3APJC80-2

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min Bedoudxchspfx Abpelc 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Dissolver Schneider SH 07 Vacuum dissolver Bodjimgqmepfx Abpelc Ex-protected version with wall scraper Drive power 13 kW power wall scraper 2,5 kW speed range 380-2000 1/min Mixing tank stainless steel double jacket 2 x 100 l usable capacity, 50 l capacity heating chamber Mixing tank stainless steel 1 x 200 l Very good condition, directly from production!!!

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Bodpfoghgq Nex Abpolc Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Bledporhzy Hsfx Abpec Technical check : OK Pas de télécommande de la grue

Condition: new, MAXION BT 20 Bench drill Powerful MK2 machine with easy-scroll control wheel and large display. Digital drilling depth, piece counter, drill depth fine adjustment and LED light are already part of the standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical data: Normal drilling capacity 20 mm Tapping capacity M 16 Spindle MK 2 drilling depth 100 mm throat 215 mm distance spindle/base plate 185 - 541 mm table surface 340 x 445 mm T-slot width 12 mm column diameter 90 mm total height 990 mm weight 120 kg Motor pole-changing 0,6/1,2 kW Mains connection 400 V/50 Hz Two spindle speeds possible: MAXION BT 20 (M00027) Bledpfx Absf Nrbfopec Spindle speeds infinitely variable 100 - 1,800 min-1 MAXION BT 20 (M00028) Spindle speeds infinitely variable 240 - 3,600 min-1 Optional accessories Drilling package Tapping device with digital depth display 200 mm longer column Cross table MF3 base cabinet electric cooling device Note: ALSO AVAILABLE AS A COLUMN PIPE MACHINE

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Bledpjwm Rvisfx Abpoc Center distance: 1500 Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Bedpfx Abeg Stz Aspolc Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm Bljdpfx Abeq Au Hujpoc rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 1277/8-71, Connected load 380V 7A cutting length 4300 mm cutting height 1925 mm rack height 2210 mm machine height 2500 mm room height 2540 mm trimming height 1870 mm Blsdpfx Abjh U Sqrjpec Passage height 1940 mm

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device very good condition Max cutting height: 2200mm Max cutting length: 4200mm Max. cutting thickness: 60mm Length: 5600mm Bjdsinunqjpfx Abpslc Depth: 1400mm Height: 2900mm Weight: 850kg