Roller conveyor

'Ligmatech' Rollenbahn | Rollenbahn

Condition: used, Segment length: 3390 mm Track width: 650 mm Roller diameter: 89 mm Roller pitch: 150 mm Bjdeglapfspfx Ab Dowt

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) Bodevdtxijpfx Ab Djwt - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Bodofi Tg Hopfx Ab Djwt Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor Bedow Dv Hzspfx Ab Djwt - WoodWOP 6.1

Condition: excellent (used), High-performance spot welding tongs with a double-acting cylinder Manufacturer: DALEX, Type 3528 - 4 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60-730 daN Double-acting cylinder, long stroke 62 mm, pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with 5/2-way solenoid valve Bwsdjki Tkpspfx Ab Dst Cardan suspension and mounting bracket 10 m connection cable with control cable Arm extension: 170 mm Arm distance: 170 mm Complete with 1 pair of electrode arms, straight on the top and bottom, 170 mm Synchronous welding control MPS 1036 Example photo

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm Bwodpfxedx Ryyj Ab Dst coil hight: max. 800 mm

Condition: excellent (used), Year of construction: 2002, Fröling boiler Output: 1250Kw Year: 2002 Burner: Gas or oil burner available on request Bodpfx Abjmnqhrs Dswt

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Bwedpfx Abeiidm No Det Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spraying system. Bwsdporahzgefx Ab Dst • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.

Condition: used, 4 tank containers made of stainless steel, used Contents: 35 cbm Order number: 4244 Material: 1.4404/1.4401 External dimensions: Bjdpfxev Dtgae Ab Dswt 7,820 mm length 2,438 mm width 2,591 mm height Operating data: according to type plate 1 container = -0.4/+4 bar operating pressure, 150 °C 1 container = -0.4/+3 bar operating pressure, 110 °C 1 container = +3 bar operating pressure, 120 °C 1 container = +4 bar operating pressure, 130 °C Design: cyl. horizontal container in a 20' transport frame with curved bottoms half pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating pressure 50 mm insulation around cylinder and bottoms connections: 2 domes DN 500 on the upper apex line and various connections outlet in the front weight: approx. 4.4 tons if required: frame for 4 tank containers made of painted mild steel, dismantled for transport external dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height additional charge on request.