Handfeed Station
4 Clamp Binding Unit
Bhz2ebv
Spine Preparation
Hot Melt Spine and Side Glue
Cover Feeder
Pressing Station
Belt Delivery
Dust Extraction Unit
Perfect working condition, full refurbishment and includes two dies.
Features of the DTP340M
Expandable to Modular Binding System (MBS) for Ring Wire, plastic comb or coil binding.
Easily punches up to 20.000 sheets/h (70/80 grm).
Electrically operated by foot switch.
The new drive system saves energy. Motor runs only if foot switch is pressed and will stop immediately after releasing.
Gxjgts
Punching width up to max. 2 x 34 cm (2 x 13\”).
Perforating twice=double length.
Adjustable lay-edge-gu...
IN STOCK -
Free Standing Inserter
Coczbttq
Hand Fed Product Feeder
Windmill & Sword Opening Station
3 Insert Feeders
Shingle Delivery
Copilot system with touch screen monitor, Board magazin for manual loading, Centre strip infeed, Chopper for the centre strip waste, Third transporter for stiff spine board, Viscosity control, Glue unit with pre-heated glue tube, Cloth feeder, Device for inside lining with hot glue, Device for producing padded cases, Pressing station, Stacking delivery, Automatic case counter, Electrical specification: 400 Volt - 3 Phase - 50 Hz
Pcgdp
4 compact-double-feeder, type MM 1551, 1 cover-feeder, type MM 1528, With creasing-system, Stitching-station, type MM 1550, 2 standard-stitching-heads and also with loop, Trimmer type MM 1522, Extra belt-delivery Model 1511, 2 compressors, Extra knife set.
Machine nr: 91.06243
Jwvm0y
Gold Cut Machine
Oxnhh
The Palamides Alpha has been developed as a universal delivery for the processing of folds, especially signatures. The products are collected by the machine, stacked and the cleanly shaken piles are delivered to a storage table. The operator removes the shaken stacks from the delivery table, ergonomically favorable, and does not have to bump the products anymore. This means that the performance of the folding machine can be fully exploited even after several hours of production without fatiguing...
Perfect working condition. This machine has only been used within an education establishment. It was supplied new by Glendale and has since been on a maintenance agreement, being serviced regularly.
Electric RENZ RING WIRE® closing machines, no effort required. A user-friendly solution to wire bind all your products quickly and easily, available in 360 mm.
Quick size adjustment for fast wire diameter set up
Integrated ring wire hanging device for comfortable working
Binds up to 340 sheets
Fast...
IN STOCK -
Spares or repair
Orbhn
Soft cover perfect bound books with hotmelt glue, Handfeeding station for one person, Gathering machine, model: ZU 804, Number of gathering stations: 20, Automatic sheet thickness control: ATC, Air center, Intermediate element with jogger, Transfer into the binder, Model: KM 471, Number of clamps: 27, Hand feeding station, Main milling station, Roughening station, Brushing station, Hotmelt spine glue station, Hotmelt side glue station, Premelter for hotmelt spine gluing system, model: LH, Gauzin...
3
1. cardboard scissors, manufacturer: Karl Tränklein, type: unknown, dimensions: approx. 1.400 mm x 700 mm,
Note: Disassembly and loading possible against payment of costs.
G3nh3nfmy
Intermediate delivery: - incl. KOLBUS infeed conveyor TS.L (year of construction 2017) - incl. emergency delivery conveyor TS.L with delivery box similar products
Oopyh
The Palamides Alpha has been developed as a universal delivery for the processing of folds, especially signatures. The products are collected by the machine, stacked and the cleanly shaken piles are delivered to a storage table. The operator removes the shaken stacks from the delivery table, ergonomically favorable, and does not have to bump the products anymore. This means that the performance of the folding machine can be fully exploited even after several hours of production without fatiguing...
6 x 370 Feeder
1528 Cover Feeder
380 Stitching Unit
Vt8fmm
Touch Screen Operation
2 x HK75 Stitching Heads
0449 Trimmer
Shingle Delivery
Optional: Muller Martini Stacker
IN STOCK -
Compensating Counter Stacker for connection to a Muller Martini 227 Inserter
Bpusjencpt
Soft cover perfect bound books with hotmelt glue, Soft cover perfect bound books with PUR glue, Book blocks for hard cover books with lining using hotmelt, Hand feeding station for 2 persons, Gathering machine, model: ZU 804.L, Number of gathering stations: 16 , Optical signature control system, make: WST, Automatic sheet thickness control: ATC, Air center: Becker, Setup element, Reject gate, for incomplete products, Stacking delivery with delivery conveyor, model: ZA 800, Hand feeding station f...
2
1. ring eye knocker, manufacturer: Nagel, type: Multinak, 2-head,
Note: Disassembly and loading possible against payment of costs.
Ddnhhqv
Book cover machine: - Copilot system with touch screen - Cardboard magazine - Schrenz feed for spine insert from roll material - Schrenz waste shredder - Cardboard schrenz magazine - Blank feeder for interval feeding with stack magazine - Missing blank control during separation - Glue application adjustment from outside - Viscosity control device -. roll-on device for crease-free connection of the cover material with cardboards and spine insert - device for padded covers - device for mirror glui...
The Baumann BA3N is an ergonomic and economically effective machine to restack single and multiple cuts with high precision.
Bgqhwvews2
Type: Baumann BA 3N, Unloader: Left, Application for size max: 770 x 1070 mm, Carrying capacity max: 80 kg, Pile height max: 900 mm, Ream height min: n/a
- with additional "glue saving basin" in stainless steel
- roller width 82 cm
- three-phase current
Buvs8mchfc
MKW UT with 20 gathering stations and stapling / folding / cutting unit
Bj. 2004
Totalizator stands at about 15 million,
the computer was replaced in 2017 and therefore shows a lot less.
We have therefore reconstructed the meter reading from maintenance logs.
Format: min. 10 x 14 cm
Format: max. 35 x 50 cm
Furnishing:
20 stations gathering machine with hand allowance on the left
Cycle performance 2900 per hour
Revolving toothed belt table
self-calibrating electronic double and missing she...
Book blocks for hard cover books with lining using hotmelt, Book block feeder, model: MBT Masuri Bookbloc, End sheet gluer with hotmelt glue, model : VA 422 (HHS hotmelt), Transfer into the binder, Model: KM 411.B, Number of clamps: 30, Co-pilot with touch screen monitor, Main milling station, First spine preparation station, Second spine preparation unit, Excluding dust extraction system, machine was connected to a centralised dust extraction system, Base for first spine gluing station, Base fo...
2
1st corner punch, manufacturer: Pescha, type: unknown, year of manufacture: 1964,
Note: Dismantling and loading possible against payment of costs.
Bultjkm0yp
Cardboard circular shear: - Manual feed table, including lateral sheet guide on the left - Strip insertion device with 2 sets of interchangeable inserts - Magazine system consisting of angular guides and 2 front strippers adjustable to cardboard thickness - 1 pair each of finely adjustable steel infeed and outfeed rollers - 1 pair of slitter shafts with 8 pairs of divided knife holders and divided acute-angled circular knives - Drop board deposit similar products.
Ehfvqxf
Used horizontal stack press delivery by Stahl.
Jv309gt2
Delivery mode: Horizontal stack press delivery, Type: SBP 86.2, Built-in controller, Sheet size max: 860 x 300 mm, Sheet size min: 120 x 100 mm, Product thickness max: 4 mm, Pile height max: 800 mm, Infeed height max: 960 mm, Infeed height min: 360 mm, Pressing force: 8.000 N
Hot Foil Lettering System DIDDE Schmedt EASYMARK 90 DL
Bjrrncla8w
Year 1990 - Serial-No. 7
Hot Foil Lettering System
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Automatic paper drilling machine that drills holes with a variable number, size and positioning in a stack of Brochures
Xvj7zcwd
The machine was connected inline to a saddle stitcher to drilled holes in booklets without additional persons.
Soft cover perfect bound books with hotmelt glue, Soft cover perfect bound books with PUR glue, Hand feeding station for 2 persons, Gathering machine, model: 1571 - 22x, Pump(s), Setup element, Reject gate, for incomplete products: 3715, Hand feeding station for one person, Transfer into the binder, Model: Acoro A5 (3026-20), Number of clamps: 20, Colour monitor(s) with touch screen, Automatic setting, Main milling station, First spine preparation station, Second spine preparation unit, Excludin...
2
1. table bundler, manufacturer: Busch, type: TB 24-I, year of construction: 2007, machine number: 372/3581,
Ceg3td3m
Book cover machine: - Cardboard magazine - Schrenzzufuhr for the spine insert from roll material - Nutzenanleger for interval feeding with stack magazine - Fehlnutzenkontrolle when separating - Glue application adjustment from the outside - Viskositätssteuergerät - Anrollvorrichtung zur crease-free connection of the cover material with cardboards and spine insert - device for padded covers - automatic cover counter - single cover request for control purposes on the operating side - Zählstapelaus...
This 3738 Streamfeeder turns feeding of your perfect binder or saddle stitcher a lot more efficient. Further Streamfeeder available on request.
30g3huw
Hydraulic Twin Press Tränklein ZP
Serial-No. 627
2 pressure plates - Size 440 x 320mm
Stack high 600mm
Space requirement 85 x 70 x 150cm
Weight net 420kg
Electrical equipment:
A.C. motor 400 volts, 3 ph.
50 cycles, 1,1 kW
Manual Included
Gwe0rs
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
/ year of construction: approx. 1990 / max. sheet size: 560 x 900 mm / min. sheet size: 140 x 180 mm / output: max. 30.000 cycles/h (according to manufacturer) / equipped with: 4 cassettes, 2 cross fold knives and delivery table
Bn028knsik
Soft cover perfect bound books with PUR glue, Solo Perfect binder, Colour monitor(s) with touch screen, Automatic setting, Hand feeding station, Milling and roughening station, Including dust extraction system, PUR spine glue unit, Drum premelter for PUR spine gluing unit, model: Nordson VersaPail, Pile cover feeder, Pump, Horizontal stack delivery
Biymaaw0qg
2
1. spindle book press, manufacturer: Karl Tränklein, type: unknown
Pa3aj
Thread sewing machine: - Feeder magazine - Opening variant 4+4 - Commander with touch screen - Book block stacker with roller conveyor to the right
Bttsqdh7u2
The mobile, height adjustable four-directional knife folding unit VFZ 52 supplements buckle plate folding machines as well as combination folding machines. When used as third unit of a buckle plate folding machine, an operator friendly U-configuration minimizes walking distances. With low investment costs, additional folding schemes and particularly thick products become processible. The knife folding unit is swivel-mounted and allows you to offer folding schemes like the international quadruple...
Block Gluing Machine Müro 4 x 5000 A3 WT 2
Year ca. 2004 - Serial-No. 20053
For Gluing of broschure, catalogues, cards, calender, blocks and more
4 pressing stations with stack high of 50cm
1 Drying hot air blower
Stack high max. 52,5cm
Press width max. 52,5cm
Press deep max. 32cm
Bkv0skccc7
Space of machine 1,8 x 1,80m
Weight approx 105 KG
Power supply 230 V - 1100/2150 W
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
-Available Im...
Perfect binder Muller Martini Pony, year of construction is circa 1981, with 5 clamps, milling station, Hotmelt spine gluing, Hotmelt side gluing, pile cover feeder, delivery tray
Bwk002nk
Handfeeding station for one person, Gathering machine, model: Kolbus ZU 841.A - 17x, Card gluer, Optical signature control system, Air center: Becker, Setup element, Reject gate, for incomplete products, Book block feeder, Intermediate element with jogger, Transfer into the binder, Model: Kolbus KM 473, Number of clamps: 32, Co-pilot with touch screen monitor, Semi automatic setting, Main milling station, First spine preparation station, Second spine preparation unit, Excluding dust extraction s...
1
1. grooving and perforating machine, manufacturer: E. Bickel, type: HK3/61, year of construction: 1961,
Bultgusieg
Note: Dismantling and loading possible against payment of costs.
4-spindle drilling machine
Gqzoyuh2i
This jogger guarantees exact alignment of the reams to be cut. Its table can be brought into an inclined position and raised up to the working height by a motor offers you best operational performance. The side flaps can be tilted manually. This jogger can be brought into a right-hand or left-hand position adjustable in steps. You can individually and infinitely variably match the jogging intensity and the speed of the air expulsion roller.
D9za9syoq
Type: SA 145 APK, Air table, Automatic air r...
Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20
Case press and joint-setting machine Schmedt PräForm HHS 20
Year 1985 - Serial-No. 83
Buchhöhe / Book height: 100 - 520mm
Buchbreite / Block width: 120 - 400mm
Blockstärke / Block tickness:: 8 - 100mm
Dw7u9a
Leistung / Output: ca. 150 St/h
Pressluftanschluss / Air supply: 6bar
Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines...
Three knife trimmer Kolbus HD 140 P from 1999. With infeed from the right, standard cutting cassette system, co-pilot for automatic format adjustment, silicon spray device, touch screen monitor, knife change device, 2 sets of knives
Gzb8vd0ey
Soft cover perfect bound books with hotmelt glue, Model: Ratiobinder KM 472.A, Number of clamps: 21, Solo Perfect binder, Hand feeding station, Main milling station, First spine preparation station, Second spine preparation unit, Third spine preparation unit, Hotmelt spine glue station, Hotmelt side glue station, Premelter for hotmelt spine gluing system, model: LH 370, Heating elements in curve, Stream cover feeder, Nipping and Pressing station, First nipping and pressing station, Gripper carri...
3
1. wire stapling machine, manufacturer: Hohner, type: Economy 25/40, machine number: 92.025.1311, dimensions: approx. h 1.700 mm x d 1.000 mm,
Note: Disassembly and loading possible against payment of costs.
Dx7z3a
Corner kick device
Ciyxurdf8
The optimal folding machine to various customer requirements in the 50 x 70 cm half-size format.
0hoxzbiy
Feeder Mode: Flat pile feeder, Type: F 530, Control Unit: MS-Control, Pockets: 4 x NIRO, Pocket Type: standard folding pocket, Pocket Configuration: manual, Rollers Configuration: manual, Roller condition: n/a, Working width max: 530 mm, Noise Protection Hood, Delivery mode: Stream delivery, Type: A 56, Sheet size max: 530 x 840 mm, Sheet size min: 105 x 105 mm
Bucheinhängemaschine / Casing-In machine Schmedt PräLeg HHS 18
Baujahr / Year 1985
Buchhöhe / Book height: 80 - 340mm
Buchbreite / Book width: 110 – 450mm
Blockstärke / Book Thickness: 2 – 80mm
Leistung / Output:
Serienfertigung / Multiple production: ca. 200 - 300St/h
Einzelfertigung / Single production: ca. 100 - 150St/h
Bctjpsld
Elektr. Anschluss / Power supply: 200 - 240V(50Hz, O,6kW)
Pressluftanschluss / Air supply: 6 bar
-Online-Video-Inspection by Skype-Video-
-We would be very pleased...
Used Book binding machines
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: The World's 10 biggest excavators
How to receive 100% of our e-mails
Photo gallery: the 10 strongest forklift trucks in the world
10 valuable tricks for buying used machines online
