Condition: repair required (used), Functionality: not functional, Heidelberg Suprasetter A52/A75 built 2008, serviced was in excellent condition prior to transport damage. Bei0Xba To be sold as spare parts in whole. Software can also be purchased additionally.

Condition: used, G&J ML550 Filmprocessor with daylight Cassette C93Gone

Condition: used, Year of construction: 2015, Machine/vehicle number: PJ0028, Total number of plates: 8871 Suprasetter A75 Gen III Uptaw0Qbir Outer drum computer-to-plate imagesetter for thermal plates with a sensitivity of 830 mm Resolution: depending on laser module type (2540 dpi or 2400 dpi) Plate formats (H x W): from 240 x 240 up to 676 x 760 mm Plate thickness: 0.15 - 0.30 mm C85 “online” Suprasetter wash-out station Wash-out station for processing chemical-free negative non-ablative thermal CtP plates Material width: up to 850 mm Material length: from 300 mm Material thickness: 0.15 - 0.30 mm Throughput: up to 120 cm/minute Plate stacker PST 26-65 Panel stacker (65 cm arm length) with its own belt conveyor and integrated panel support Capacity (panel support): approx. 80 panels at 0.3 mm thickness Min. panel size: 394 x 324 mm Max. Panel size: 650 x 820 mm Dimensions (LXBXH): 870 x 820 x 1300 mm Power supply: 110 - 250 V AC+N+PE, 50/60 Hz, 10A

Condition: used, Year of construction: 2006, Size: 660 x 830 mm Gxc2Wyi Equipments: 32 DIODS

Condition: used, Year of construction: 1995, Machine/vehicle number: 4501, Filmentwicklungsmaschine / Film develope machine AGFA RapiFlex 51    Baujahr / Year 1995 - Serial-No. 4501DD382942 Arbeitsbreite / Size max. width 510mm Fzjfunw Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Condition: used, Year of construction: 2008, max. plate size 824 x 1143mm mm min. plate size 228 x 252mm mm max. speed plates 15 /h incl. Rip incl. Compressor inkl. Glunz & Jensen MP 85 Umct8Iierv

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Direct laser engraving including: • CO2 single beam laser 500W • Max. plate format: 1206 x 1700 mm • Resolution: 4000 dpi • 16321 laser hours C93D0Xa • Next service 1295 hours • bestImage software on PC • Flexo sleeves possible • Air compressor • Chiller unit

Condition: like new (used), Plate Detection Sensor for Suprasetter 74/105/A52/A74/A75/A105 Ipn2Lu9C3 MV.059.116-02 (old no. PL.125.0000) second hand, tested

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Licence for max format: 676 x 530 mm; from 2021 server T340-S18; Heidelberg Prinect production manager- Dell R 340, PCI card to CTP. Prinect Production Manager version 2021.10; Bkaovx39Iaq The RIP is in the workflow and comes from Adobe. This CTP hardware and software is up to date, further subscription can be taken over worldwide.

Condition: used, Year of construction: 2006, Size: 660 x 830 mm Equipments: Dpq0An Plate format: Maximum 830 x 660 mm, Minimum 324 x 370 mm Power supply: 200-240V, 50/60 Hz Computercontrol System MPS68 Exposure technology: Thermal CTP system weight ca. 1.000 kg Speed: Up to 21 plates per hour (at 2,400 dpi) ONE TH 85 plate developer Plate thickness: 0.15 mm to 0.30 mm Resolution: 2.400 dpi 32 DIODS Typ: Computer-to-Plate (CTP) System Ambient temperature: 18-24 °C Equipment: Automatic plate feeding with ONE-TH-85 Kassettenloader Modell: PTR 4300

Condition: used, Year of construction: 1999, Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Jq2990I9 Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Condition: good (used), Year of construction: 2004, AGFA Acento S Bunebgp2Ya CtP Setter year 2004 approx. 139,000 plates exposed automatic loader L50 incl. PC with RIP Screen Harlequin 8.1.

Condition: used, Year of construction: 2010, Agfa VCF85 violet clean out unit, Yqjcgwh online version Only for Export !

Year of construction: 2023, Condition: new, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >180 mA U1150073-10 Refurbished Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, (new diode inside, used housing) U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 Ccud07Xc 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new

Condition: used, Year of construction: 2007, Size: 762 x 685 mm Equipments: B70Zgi3Jpc Stacker HU.Q Csg-86 C Laser head and all other parts without damages Plate size: min 300 x 228 mm Plate size: max 685 x 762 mm One electronic card burnt ( see photos) Available immediately , complete with all accessories Autoloader with 3 cassettes Resolution: up to 2540 dpi Productivity: Up to 22 plates/hour

Year of construction: 2022, Condition: as good as new (ex-display), AGFA Azura C95 clean out unit excellent condition available immediately Dmaqbr

Condition: like new (used), PJ.187.100 Chiller Unit cpl. for Suprasetter A52/74/75/105 Bv8T0D0B0K second-hand, tested

Condition: used, Year of construction: 2008, Size: 830 x 660 mm Dpizhh Equipments: 16 diodes max 830 x 660 mm RIP Stacker

Year of construction: 2012, Condition: good (used), Functionality: fully functional, Laser Moduls for Heidelberg Suprasetter, second hand, tested Bdjqia7Il9 1 x GEN II, class 160 mW, 64 diodes, 2.540 dpi approx. 3.500h exposing time 1 x GEN II, class 160 mW, 64 diodes, 2.540 dpi approx.

Condition: refurbished (used), refurbished mirror motors 633/750 Hz. for Heidelberg Prosetter 52/74/102 Jfybbuqs fully tested, warranty refurbished mirror motors 633 Hz. for Heidelberg Primesetter /74/102 fully tested, warranty refurbished mirror motors for Linotype-Hell/Heidelberg Herkules/Pro/Basic/Elite fully tested, warranty All offers subject to prior sale

Year of construction: 2024, Condition: new, U1254024-01 Trailing Edge Clamp Unit, new (Screen PT-R4xxx & OEM) PlateRite 4xxx, Luxel T6xxx, Acento, Avalon N4, Topsetter 74/P S100096323V02 orig. Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF S3Rbv292H S100096323V02 Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) refurbished with orig. parts (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF

Year of construction: 2012, Condition: like new (used), MV.055.656/03 M10 Drive Motor for Suprasetter A52/A75, (new model >2009) second-hand, tested E3Dcoqt

Condition: good (used), Nearly all SCREEN, FUJI, AGFA, HEIDELBERG CTP Spareparts second hand, tested and new Baluq9Edff All offers are subject to prior sale

Condition: excellent (used), Nearly all Suprasetter Spareparts Crp0Shr for A52/74/75/105 and Classic and Suprasetter Laser Moduls, second hand, tested All offers are subject to prior sale

Condition: excellent (used), Year of construction: 2011, Operating hours: 923 h, Heidelberg Suprasetter A75-ATL, GEN III, 2011 internal punch 2 cassettes, online conveyor & plate stacker. 1 Gen. II laser module, class 160 mW 64 diodes, 2.540 dpi, imaging time: approx. 3.500h plate count: 89.000 pcs. Cefuvryxeo incl. Heidelberg Prinect RIP/workflow dongle with license and Interface-Card cleaned, maintained and tested All offers are subject to prior sale