Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Cobu Uf Uohwwyrobegt Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: good (used), Compressed air line / compressed air pipes made of aluminum total approx. 325 m Cgjbusvv Nvne Uf Ubot

Condition: used, Year of construction: 2005, feed pressure 10 bar liter capacity 2,66 m³ / min total power requirement 18,5 kW Cebovuz Rhsu Uf Ubjgt motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco GA 18 - 10 FF screw compressor with boiler Fully automatic, internally fully piped and wired compact system, single-stage oil-injected compression, air-cooled, sound-insulated, built-in refrigerant dryer (WorkPlace Air System™). Technical data Reference conditions: Suction pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volume flow at the outlet of the compact system at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Rated motor power 18 kW Nominal motor speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after the dryer 23 °C Cooling air volume 0.23 m³/s Csbusu Rptyj Uf Ubjgt Oil filling quantity 12.2 l Residual oil content under reference conditions

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Cgjbu Uouyh R Aof Ubet Height (mm): 2600 Depth (mm): 600/800

Condition: used, Year of construction: 2003, volume flow: 283 m³/h, total width: 1,183 mm, total length: 1,200 mm, total height: 2,073 mm, pressure: 7 bar, overall weight: 605 kg, pressure dew point: -40 °C, pressure (max.): 16 bar, Equipment: type plate available, 1 heatless adsorption dryer Manufacturer: Kaeser Type: DC47E Flow rate: 283 m³/hour (4.72 m³/minute) Pressure dew point: -40°C Inlet temperature: 35°C Outlet temperature: 35°C Operating pressure: 7 bar Max. operating pressure: 16 bar Compressed air connection: DN25 (R1") Adsorbent: activated aluminum oxide Vessel capacity: 133 liters Filling weight: 60 kg Cgebu Uf Uev T Tw Rsbot Dimensions: Height: 2073 mm Width: 1183 mm Depth: 1200 mm Weight: 605 kg

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Cgebujvmivcj Uf Ubet Without guarantee - without warranty -

Condition: like new (used), Year of construction: 2011, 1 x Refrigeration Dryer Kaeser TA 5 Year of manufacture: 2011 In mint condition. With operating instructions. (Photo follows) The dryer can be inspected at our warehouse at any time. Cobu Ufsv Tbuqs Ubogt

Condition: like new (used), We offer a new and used screw compressors, air dryers, line filters, air tanks, pneumatic components, air cylinders, and compressor maintenance and spare parts. Compressors available in 2.2kw - 500kw.  Cjbu Ufjfiug Ss Ubegt The compressors we sell are ALL maintained and in good condition. All compressors have a warranty of at least 2 months. We sell only quality brands such as Alup, Kaeser, Atlas Copco, Compair, Ceccato, Almig and so on. If you are interested please feel free to contact us!

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Cjbu Uf Uetx Aknjbjgt Ready to use condition.

Condition: like new (used), Year of construction: 2014, SCREW COMPRESSOR ALUP LARGO 76 75Kw 2014r Screw compressor ALUP LARGO 76 machine after service Technical data: capacity:14.2 m3/min; Cgobepr Uixeu Uf Ubjt engine 75KW; pressure;7.5bar; mileage;8236h; Year;2014 compressor fully functional, net price: 28500 PLN gross price: 35055 PLN

Condition: good (used), Year of construction: 1992, screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Ecoair, screw compressor type STKL 30 B 18.5 -Volume flow: 2.5 m³/min -Engine power: 18.5 kW -Operating hours: 2,746 h -max. pressure: 10 bar Cgebujvuy Nvs Uf Ubst -Inlet: 580 x 250 mm -Outlet: 740 x 250 mm -Individual components: see photos -Dimensions: 1100/1000/H1070 mm -Weight: 362 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 330 h, Functionality: fully functional, machine/vehicle number: 24342305, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Renner Screw Compressor RS-Pro 7.5 - 13 bar Rated power: 7.5 kW IE4 motor mounted on a 500 l tank, complete with refrigeration dryer and condensate drains -incl. RENNERtronic Plus Touch -with soundproof box and pre-filter grille -G1/2" connection -Compressor free flow rate at 13 bar: 0.86 m³/min Incl. Renner Screw Compressor RS-PRO 7.5 - 13 bar Cgsbu Ujv Ingpsf Ubet Rated power: 7.5 kW IE4 motor -incl. RENNERtronic Touch -Compressor with soundproof box and pre-filter grille -G1/2" connection -Compressor free flow rate at 13 bar: 0.86 m³/min Price includes:

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, Piston compressor Cgjbuewb R Ris Uf Ubst Power HP 5.5 Flow rate 460 lt/min Pressure 10 bar

Condition: ready for operation (used), Year of construction: 2018, Measuring cabinet built with apparatus from Bürkert and Festo. Cabinet (Rittal AE1073 500) has traces of use. Cabinet content consists of: Bürkert 8626, + pressure reducer Festo MS6-EM1/2-S Festo MS6-LFR-1/2-D7-C-U-M-AS Festo MS6-SV-1/2-E-10V24-SO-AG-MP1 More photos on request! Cobujk Dz I Uo Uf Ubsgt Sale without warranty and guarantee, price ex works and free loaded Seevetal, plus VAT

Condition: excellent (used), Compressor type: Dry air Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Cgebuewcgc Ro Uf Ubjt Supplied air: 7.73m³ / min; 464m³ / h Motor power: 90kW

Condition: excellent (used), Year of construction: 2018, Stationary piston compressor with 2x 100 liter compressed air tanks and dryer with bypass AIRPROFI DUO 703/2x100/10K Universally applicable compressed air station with 2 x 100 L compressed air tanks, fully assembled on a safety pallet, space-saving and transportable Article number 2023072 Two-stage, 2-cylinder high-performance unit with gray cast iron cylinder block The low speed ensures quiet, low-vibration operation and a long service life Large fan wheel for optimal cooling Quality electric motor with high starting torque Electric motor equipped with motor protection switch With phase inverter for easy manual reversal of the direction of rotation Intermediate and aftercooler reduces the formation of condensate Maintenance block with two pressure gauges for tank pressure and working pressure and high-quality CONDOR pressure switch Fifteen-year guarantee against rust on hot-dip galvanized parts inside and out Compressed air tank Fully automatic on/off operation Ready for connection with all fittings Increased flexibility By connecting the second compressed air tank, the tank volume is doubled, which means that a higher air supply can be built up An increased air requirement can thus be covered at short notice. The second compressed air tank can be separated from the compressed air supply, for example for chiseling or sandblasting work. This halves the tank volume and the pressure is built up more quickly. Equipment details: K version with refrigeration dryer with integrated automatic condensate drain as standard Pressure dew point 5 °C, compressed air inlet temperature 35 °C, cooling air temperature 25 °C TECHNICAL DATA Cjbu Ufsvlkwrs Ubegt General information Air outlet 3/4" Dimensions and weights Length (product) approx. 1200mm Width/depth (product) approx. 900mm Height (product) approx. 1250mm Weight (net) approx. 235kg Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4kW Input power 4.81kW Noise emission Sound pressure level Lp 83dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor Compressor system HOS Suction capacity approx. 650l/min Filling capacity approx. 520l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950min¯¹ Compressed air tank Maximum pressure 10bar Tank capacity 200l Remarks Tank capacity 2 x 100 l Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2015, overall weight: 748 kg, volume flow: 4.23 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, CECCATO CSC 40 screw compressor 30 kw engine Capacity 4.23 m3/min Pressure 10 bar Cgjbu Uf Uowaucgebot Year of production 2015 Mileage 22000 mtg Fully functional compressor

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Cgebjv Ta D Dsu Uf Ubst Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: new, Year of construction: 2025, new compressor with warranty (we are official dealers). discounted price. list price euro 25441. possibility of combining Atlas Copco dryer (available). latest technological model. main features: Cebujwcm Hie Uf Ubegt max bar 10 power 15kw-20hp air flow liters7min 3000 for detailed technical sheet do not hesitate to contact me.

Condition: like new (used), Year of construction: 1994, AIR COMPRESSOR DEMAG MARATHON 301 Producer: DEMAG Type: MA301/9AS Pressure: 9 BAR Capacity: 28 m3/min. Serial No. 50557900 Motor: 260 kW Production date: 1994 Counter: 36.170 h *Auxilary systems available AIR DRYER PARKER HIROSS POLESTAR SMART Producer: PARKER HIROSS Type: PST460 Serial No. 398037030001 Voltage: 400 V Frequency: 50 Hz Max air in: 65 celsius Cjbu Uf Uji Ewinebogt Serial No. 50557900 Motor: 6,26 kW Production date: 03/2011 Weight: 525 kg Refrigerant: 407C 7,5 kg

Condition: good (used), Year of construction: 2014, operating hours: 18,624 h, Functionality: fully functional, machine/vehicle number: CAI770008, total length: 1,935 mm, total width: 620 mm, total height: 1,463 mm, motor manufacturer: AtlasCopco, power: 7.5 kW (10.20 HP), pressure (max.): 10 bar, Output: 60m3/hour at 8Bar (1000lit/min) Max. Pressure: 10 bar, Motor: power 7.5kW, voltage 400V Noise level: 66 dB(A) Weight: 335 kg 500 liter pressure vessel Dimensions: 1935×620×1463mm (LxWxD) Cgsbu Uoum I E Ejf Ubet The compressor includes a 500l pressure vessel, an air dryer. The compressor comes with a control unit, filters (basic and microfilter) and electronic de-sludging of the container and filters. Parts a are used on all compressors mainly screw blocks from Atlas Copco. MARK is a subsidiary of Atlas Copco

Condition: good (used), Compressed air-driven airless pump on pump trolley The T2001 piston pumps are robustly designed air-operated airless pumps developed for pumping, transferring and painting with multiple guns. The wetted parts are made of stainless steel, carbide, PTFE or PE. ATEX approval for use in potentially explosive atmospheres completes the picture and makes the pumps highly versatile. Below you will find the advantages at a glance: - Minimal pulsation for an even material flow when pumping and spraying - Versatile use thanks to stainless steel, carbide, PTFE or PE in the material area - Suitable for liquid solvents and water-based materials Cgebort Uy Nsu Uf Ubet - Simple commissioning thanks to self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Material volume flow max: 9.0 l/min Suction head (empty pump):1.5 mWS Suction height (filled pump):6.5 mWS Material temperature: +10 to +85 C Max. stroke frequency (short):50 DH/min. Max. stroke frequency (continuous):20 DH/min. Material overpressure max: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 ccm Permissible operating overpressure: max. 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection:G3/4" Material outlet:G3/8" Material inlet:G1″ Weight:45 kg Inch tariff no. 8424 8970 Year 2001 New price 13,600 € incl. VAT. Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Elster SM-RI-X-E G1600 Turbine gas meter Elster turbine gas meter SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³ / h Cgebu Ufjd I Tz To Ubjt Qmin: 130 m³ / h pmax: 89.5 bar No: 10520813-2014 Pulse generator HF2 162.370 Imp / m³ Manufacturer price: 21.540, - € net More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Rusch SB 0530 D 2HO FA XX side channel blower 8,6 kW Cgobu Ujiu Hxcof Ubet Rusch Side channel blower SB 0530 D 2HO FA XX No. E UO 40 3333 03 001/05 EN 60034 3 P Motor IP 55 50 Hz 7,5 kW 200 - 240 V / 29 A 345 - 415 V / 16.7 A 2905/min 60 Hz 8,6 kW 220 - 275 V / 30 A 380 - 480 V / 17.3 A 3490/min weight: approx. 180 kg Further side channel blowers in other sizes - new and used - you will find in our store! International shipping costs on request!