Condition: new, Exhibitor compressor Condition: very good Features: * Durable, V-belt driven compressor blocks Crelqyxevf Sa Uj Nhob * Motor and compressor protection against overheating * With refrigeration dryer mounted on container * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: . H704106 Compression end pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.5 m³/min Compressor speed 6,010 min-1 Rated power drive motor (V/Hz) 4 kW Electrical connection 400 V / 3 phases / 50 Hz Protection class drive motor IP 55 Ambient temperature min. / max. +5°C / +40°C Oil capacity 2.5 l Sound pressure level (LPA1 -DIN 45635 T13) 61 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1498 mm x 582 mm x 1340 mm Weight 204 kg Technical data refrigeration dryer DK 600 SMART: Volume flow at pressure dew point +3°C 600 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.16 kW Air connection 3/4 "a Refrigerant charge R134a

Condition: new, Exhibitor - Atlas Copco screw compressor G 4 - 10FF TM (200l tank) Condition: Very good Usable volume flow at the outlet of the compact system: Crelovf Sbfjqyx Nhsb at operating overpressure 9.5 bar 8.6 l/s 0.52 m3/min Technical data: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Rated motor power 4.0 kW Rated motor speed 2,915 min-1 Compressed air temperature after the dryer 25 °C Oil filling quantity 2.5 l Residual oil content

Condition: new, Exhibitor compressor Schneider compressor AM B 11-10 Operating hours 16 h Features: Crolqyx Novf Sblehjb * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * Electronic AIR ENERGIE CONTROL 3 control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. * 1 year guarantee Technical data compressor AirMaster Professional Solo . H711100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.5 m³/min Compressor speed 6,115 min-1 Rated power drive motor (V/Hz) 11 kW (400 V / 50 Hz) Motor efficiency 91.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,800 m³/h Ambient temperature min. / max. +5°C / +40°C [?T] +18°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 65 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 266 kg

Condition: new, Exhibitor - Schneider industrial compressor AM D 7-13-500 XVSBDK Screw compressor Condition: Very good Speed-controlled with refrigeration dryer and integrated fine filter Features and benefits: * The graphically structured AIR ENERGIE CONTROL 3+ control unit makes it easy to operate the compressor * Extremely quiet compressors thanks to special noise insulation * Quiet and extremely efficient operation thanks to directly driven compressor stages with or without gearbox. * Highest economic efficiency High volume flow with low energy consumption - the variants are therefore BAFA-compliant * Easy maintenance Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts. No V-belt replacement necessary thanks to direct drive Technical data: AirMaster Variable Speed compressor: Crelqyx Nevap T Ujhob . 4152018486 Compression end pressure 13 bar Working pressure 5 - 13 bar Volume flow at working pressure 7 bar (ISO 1217) 270 - 1,224 l/min Rated power drive motor (V/Hz) 7.5 kW (400V/50Hz) Sound pressure level (LPA1 -DIN 45635 T13) 64 dB(A) Connection air outlet 3/4 "i Tank capacity 500 liters Dimensions (W x D x H) 1935 mm x 655 mm x 1680 mm Weight 447 kg

Condition: new, Exhibitor Gentilin B110/05 - 60 l/min - 9 bar - 0,75 kW - compact oil-free mini compressor Condition: as new The oil-free compressor B110/05 from Gentilin is the flyweight among the Compact Air Compressors. Weighing just 11 kilograms, the portable piston compressor can be transported flexibly and easily from one location to the next. Thanks to its extremely quiet operation, the handy mini compressor is the ideal companion for small jobs at work or in the hobby workshop. See the following practical details for yourself. The advantages of the B110/05 at a glance: * Portable piston compressor with handy carrying handle * 11 kg total weight for easy carrying * with oil-free compressor for low-maintenance operation * Low-noise with 72 dB sound pressure level * with highly effective intake filter * Easily accessible air connections and easily accessible condensate drain * Can be used for smaller jobs in the business or hobby sector * ideal for use with tools with low compressed air requirements Technical data: Pressure 9 bar Suction capacity 110 l/min Filling capacity 60 l/min Speed 2800 min-1 Vessel volume 5 l Weight 11.0 kg Sound pressure level 72 dB(A) Dimensions (WxHxD) 200x400x400 mm Drive power 0.75 kW Voltage 230 V The standard equipment of the Gentilin B110/05: Colqevap Uloyx Nhorb * Anti-shock design for maximum protection against impacts * Handy plastic carrying handle with anti-slip function * Fully automatic switch-on and switch-off operation * High-quality CONDOR pressure switch * Pressure regulator for stepless adjustment of the working pressure * One pressure gauge each for displaying tank pressure and working pressure Gentilin oil-free mini compressor B110/05 - small, light and quiet! Small but powerful! This is how the mobile lightweight Gentilin compressor presents itself. With its compact dimensions, low weight and quiet operation, the oil-free piston compressor is ideal for hobbyists and DIY enthusiasts. The handy compressor can be moved quickly and easily from one place to another using the practical carrying handle.

Condition: new, Schneider exhibitor refrigeration dryer DK 600 SMART Condition: very good 3 good reasons for the Schneider DK 600 SMART refrigeration dryer 1. optimum air quality The Schneider SMART compressed air refrigeration dryers ensure ideal treatment of the compressed air, extend the service life of your compressed air tools and machines and reduce the maintenance costs of your compressed air system. 2. broad portfolio The portfolio, which is precisely matched to kW classes, offers the optimum refrigeration dryer for all compressed air systems. Whether in the small range from 350 l/min or for large systems up to 10,000 l/min, these Schneider refrigeration dryers represent the ideal dryer. 3. operational reliability Optimum and long-lasting work results thanks to compressed air reliably cooled to a pressure dew point of 3°C. This results from continuous operation with a stable dew point. Consistent quality of operational applications with compressed air is therefore permanently guaranteed. Benefits of the Schneider DK 350 SMART - DK 1825 SMART refrigeration dryer * Ideal protection of the DL line against corrosion * Space-saving inst. * Best operational reliability of production plants * Heat exchanger - High efficiency thanks to heat exchanger made of stainless steel plates Product description: * Simple control * Refrigerated compressed air dryer with 3°C pressure dew point for demanding tasks in continuous operation * With high-quality electronic level-controlled condensate drain as standard * Space-saving installation due to compact dimensions (not intended for wall mounting) Technical data Cjlqyjvap Urex Nhsrb Volume flow at pressure dew point +3°C at 7 bar 600 l/min Pressure loss 0.25 bar Weight 19 kg Dimensions (WxDxH) 493x350x450 mm Air outlet G 3/4 "a Power consumption 0.16 kW

Condition: new, Exhibition compressor from our showroom | Like new Advantages: Colqevap U Esyx Nhorb * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * With sound insulation hood, extremely quiet * The sound-insulating hood enables installation even in sensitive areas * Container with baked-on inner coating * 15-year guarantee on container against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Space-saving solution with upright container Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel volume 90 l Weight 162 kg Noise 69 dB(A) Dimensions (WxDxH) 775x740x1275 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4.0 kW Volume: * Sound pressure level LPA: No manufacturer specifications at a distance of 4 m according to 79/113 EEC, L(PA4) * Sound power level LWA: 69 dB(A) according to DIN EN ISO 3744 (RL 2000/14/EG) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you do not receive a shipment yourself

Condition: new, Exhibitor - Atlas Copco screw compressor G 5 - 10FF TM (200l tank) Condition: very good Usable volume flow at the outlet of the compact system: at operating pressure 9.5 bar 13.0 l/s 0.78 m3/min Technical data: Crjlevap Ufjqyx Nheb Intake pressure 1 bar Intake temperature 20 °C relative humidity 0 % Rated motor power 5.5 kW Rated motor speed 2,905 min-1 Compressed air temperature after dryer 25 °C Oil capacity 2.5 l Residual oil content

Condition: new, Exhibitor compressor Schneider AM B 7-10 Operating hours 4 h Features: * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct Crolevap Uxoqyx Nheb * Durable, V-belt driven compressor blocks * AIR ENERGIE CONTROL 3 electronic control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. * 12 months warranty Technical data compressor AirMaster Professional Solo . H707100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.1 m³/min Compressor speed 4,523 min-1 Rated power drive motor (V/Hz) 7.5 kW (400 V / 50 Hz) Motor efficiency 90.1 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,260 m³/h Ambient temperature min. / max. +5°C / +40°C [pressure difference T] +16°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 63 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 246 kg

Condition: new, Exhibitor compressor Schneider compressor AM B 5-10 Screw compressor Condition: like new Features: * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions Colqsufp Hgoyx Nhjrb * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * AIR ENERGIE CONTROL 3 electronic control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. Technical data compressor AirMaster Professional Solo . H705100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.7 m³/min Compressor speed 3,175 min-1 Rated power drive motor (V/Hz) 5.5 kW (400 V / 50 Hz) Motor efficiency 89.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,080 m³/h Ambient temperature min. / max. +5°C / +40°C [?T] +14°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 62 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 241 kg

Condition: new, Exhibitor compressor Schneider compressor AM B 4-10 Condition: very good Crelqyxoufpz Ro Nhob * Simple handling thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * AIR ENERGY CONTROL 3B electronic control unit with display of operating hours, service messages, load hours, etc. Technical data compressor AirMaster Professional Solo . 4152052419 Compression end pressure 10 bar Working pressure Volume flow at working pressure (ISO 1217) 516 l/min Voltage 400 V Drive power 4 kW Weight 120 kg Noise 62 dB(A) Air outlet 3/4" Dimensions (W x D x H) 620mm x 630mm x 950mm

Condition: new, Exhibitor compressor Features: Cslqyxeufp Hme Nherb * Durable, V-belt driven compressor blocks * Motor and compressor protection against overheating * With integrated refrigeration dryer mounted on tank and fine filter * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: . H705106 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.7 m³/min Compressor speed 3,175 min-1 Rated power drive motor (V/Hz) 5.5 kW (400V/50Hz) Motor efficiency 89.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,080 m³/h Ambient temperature min. / max. +5°C / +40°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 62 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1550 mm x 690 mm x 1560 mm Weight 338 kg Technical data refrigeration dryer DK 1200 SMART: Volume flow at pressure dew point +3°C 1200 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.27 kW Air connection 3/4 "a Refrigerant charge R134a

Condition: new, Exhibitor compressor Advantages: Crslqyjufp Idjx Nhob * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * Tank with baked-on inner coating * Comes with all fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain valve and stopcock * Equipped with rubber oscillating elements as standard * With refrigerant dryer and bypass line * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for simple connection of an Ecomat condensate drain * High-performance refrigeration dryer with Super-Dry Technology and ECO switch-off * Start-up via an automatic star-delta switch is mandatory for all compressors and units from 5.5 kW. This is not included in the scope of delivery, but the start-up relief is: * 15-year guarantee on containers against rusting through * The low speed reduces vibrations, protects the compressor components and reduces noise * Better compressed air quality and work results * Intercooler and aftercooler ensure rapid cooling of the compressed air produced * The refrigeration dryer removes the condensate from the compressed air * Equipped with a bypass line as standard * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel volume 270 l

Condition: new, Exhibitor compressor Advantages: * HANDLICHER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar or increases performance and ensures high efficiency * Tank with baked-on inner coating * 15-year guarantee on tank against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) * Space-saving solution with upright tank Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Volume 500 l Weight 215 kg Noise 78 dB(A) Dimensions (WxDxH) 850x850x1945 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4 kW Crelqyxoufp Iko Nhob Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 a.m. - 5 p.m., delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to leave a note for the carrier on the front door or doorbell sign on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Exhibitor - Schneider compressor AM D 7-13 XVSDK Screw compressor Condition: Very good Features and benefits: * The graphically structured AIR ENERGIE CONTROL 3+ control unit makes it easy to operate the compressor * Extremely quiet compressors thanks to special noise insulation * Quiet and extremely efficient operation thanks to directly driven compressor stages with or without gearbox. * Highest economic efficiency High volume flow with low energy consumption - the variants are therefore BAFA-compliant * Easy maintenance Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts. No V-belt replacement necessary thanks to direct drive Technical data AirMaster Variable Speed compressor: Crsloufpzqjqyx Nhjb . 4152017980 Compression end pressure 13 bar Working pressure 5 - 13 bar Volume flow at working pressure 7 bar (ISO 1217) 270-1224 l/min Voltage 400 Volt Drive power 7.5 kW (400V/50Hz) Weight 281 kg Noise 64 dB(A) Air outlet 3/4" Dimensions (W x D x H) 1415 mm x 655 mm x 1045 mm

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 20 - 20 l/s - 1200 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Cjlqyeufp Anex Nherb Volume flow 20 l/s Volume flow 1.20 l/min Volume flow 1200 m³/min Pressure dew point 3 °C Differential pressure 0.12 bar Power consumption 0.41 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 34 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.48 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with fan, condenser pressure regulator Direct refrigerant injection with hot gas bypass valve * Dew point alarm as collective warning (potential-free contact) * Electronic control unit * Dew point temperature alarm symbol * Message symbol ambient temperature Optionally available * Spin

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 15 - 15 l/s - 900 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 15 l/s Volume flow 900 l/min Volume flow 0.9 m³/min Pressure dew point 3 °C Differential pressure 0.12 bar Power consumption 0.33 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Crslqysufp Ahsx Nhob Length/width/height 496/377/461 mm Net weight 32 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.33 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with valve

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 30 - 30 l/s - 1800 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 30 l/s Volume flow 1800 l/min Volume flow 1.8 m³/min Pressure dew point 3 °C Differential pressure 0.25 bar Power consumption 0.41 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Celsufp Ausqyx Nhjrb Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 34 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.48 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with fan, condenser pressure regulator Direct refrigerant injection with hot gas bypass valve * Dew point alarm as collective warning (potential-free contact) * Electronic control unit * Dew point temperature alarm symbol * Message symbol ambient temperature Optionally available * Spin

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FX15 - 14 l/s - 840 l/min Condition: Very good Technical data: Volume flow 14 l/s Volume flow 840 l/min Volume flow 0.84 m³/min Pressure dew point + 3 °C Differential pressure 0.250 bar Power consumption 0.190 kW Operating voltage/frequency 230/1/50 Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Crolqyoufp A Ijx Nhob Ambient temperature min. 5 °C Ambient temperature max. 43 °C Inlet temperature min. 3 °C Inlet temperature max. 55 °C Operating pressure min. 6 bar Operating pressure max. 16 bar Dimensions, weights and connections: Length/width/height 493/350/450 mm Net weight 20 kg Compressed air connections 3/4 " Equipment features and special features The FX series refrigeration dryers offer a reliable, cost-effective and simple solution for anyone who requires high-quality compressed air for their production processes. To avoid condensation and thus the risk of corrosion and damage to systems and end products, the compressed air must be dry - which is exactly what the FX dryers are designed for. The FX dryer range is simple yet robust and reliable. It is a simple range that relies on proven technology, solid components and a straightforward design; these features combine to deliver a constant dew point and reliable performance at any volume flow - in almost any production application. Functional principle Refrigeration drying means that the compressed air is cooled, resulting in a large amount of water that must be separated from the air. After cooling and condensation, the compressed air is reheated to around room temperature so that no condensation forms on the outside of the pipe system. This heat exchange between incoming and outgoing compressed air also reduces the required cooling capacity of the refrigerant circuit. Cooling takes place via a closed refrigerant system. Direct refrigerant injection reacts immediately to a load change and a high-precision hot gas bypass valve ensures a constant temperature ratio

Condition: new, Exhibitor compressor Cslqyxouzn Spe Nhjrb Features: * Durable, V-belt driven compressor blocks * Motor and compressor protection against overheating * With integrated refrigeration dryer mounted on tank and fine filter * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: . H707106 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.1 m³/min Compressor speed 4,523 min-1 Rated power drive motor (V/Hz) 7.5 kW (400V/50Hz) Motor efficiency 90.1 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,260 m³/h Ambient temperature min. / max. +5°C / +40°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 63 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1550 mm x 690 mm x 1560 mm Weight 346 kg Technical data refrigeration dryer DK 1200 SMART: Volume flow at pressure dew point +3°C 1200 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.27 kW Air connection 3/4 "a Refrigerant charge R134a

Condition: new, Exhibitor - Schneider industrial compressor AM D 11-13-500 XVSBDK speed-controlled with refrigeration dryer and integrated fine filter Crjlqjuzn Sieyx Nhjb Features and benefits: * The graphically structured AIR ENERGIE CONTROL 3+ control unit makes it easy to operate the compressor * Extremely quiet compressors thanks to special noise insulation * Quiet and extremely efficient operation thanks to directly driven compressor stages with or without gearbox. * Highest efficiency High volume flow with low energy consumption * Easy maintenance Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts. No V-belt replacement necessary due to direct drive Technical data: AirMaster Variable Speed compressor: . 4152018487 Compression end pressure 13 bar Working pressure 5 - 13 bar Volume flow at working pressure (ISO 1217) 264-1824 l/min Rated power drive motor (V/Hz) 11 kW (400V/50Hz) Sound pressure level (LPA1 -DIN 45635 T13) 64 dB(A) Connection air outlet 3/4 "i Tank capacity 500 liters Dimensions (W x D x H) 1935 mm x 655 mm x 1680 mm Weight 465 kg

Condition: new, Exhibitor (H911100) Condition: very good Features: * Durable, V-belt driven compressor blocks * Maximum operating convenience thanks to AIR ENERGIE CONTROL 3+ electronic control system with direction of rotation control, display of operating hours, maintenance schedule, service messages, load hours, etc. * BAFA-capable * Optimum adjustment to the actual air consumption thanks to speed control * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Enormous time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts and direct drive * Extremely quiet due to soundproofed housing * Simple installation of an exhaust air duct thanks to upward exhaust air routing Celqyxouzn Svs Nhorb * Prevents expensive damage during commissioning thanks to integrated direction of rotation control * Incl. high-quality microfilter (supplied loose) Technical data AirMaster Variable Speed compressor: . H911100 Compressor discharge pressure 12.5 bar Working pressure 5 - 12.5 bar Volume flow at working pressure (ISO 1217) 264 - 1,824 l/min Compressor speed 7,597 min-1 Rated power drive motor (V/Hz) 11 kW (400V/50Hz) Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 2,200 m³/h Ambient temperature min. / max. +2°C / +40°C Oil capacity 4.7 l Sound pressure level (LPA1 -DIN 45635 T13) 64 dB(A) Air outlet connection 3/4 "i Tank capacity - dimensions (W x D x H) 1165 mm x 655 mm x 1045 mm Weight 251 kg

Condition: new, Exhibitor unit - Refrigeration dryer DRYPOINT® RA 50, the most economical way to dry compressed air - incl. level-controlled condensate drain BEKOMAT - Technical data: Volume flow (m³/h)* 51 Volume flow (m³/min)* 0.85 Volume flow ( l/min)* 850 Power consumption (kW) 0.22 Compressed air loss (deltap [g]) 0.08 Air connection G1/2 BSP-F Dimensions (mm / HxLxW) 740x345x420 Max. Max. compressed air inlet temperature (C°) 70 Min./max. operating pressure (bar [g]) 4/16 Min./max. ambient temperature (°C) 2/50 Electrical connection 230 V, 50-60 Hz, 1ph. The DRYPOINT® RA advantages at a glance * Best drying due to highly effective heat exchanger combination * Lowest pressure loss, even with varying loads * Excellent price-performance ratio * Highest efficiency, lowest energy consumption * BEKOMAT® inside * Environmentally friendly refrigerant DRYPOINT® RA: an investment that pays off Operating costs, not investment costs, determine the profitability of refrigeration dryers. Over an operating period of five years, only between 20 and 30 % of the total costs are accounted for by the pure investment. In contrast, 70 to 80 % is made up of running operating costs. One third each of these result from electricity costs, compressed air resistance in the system and compressed air losses due to leaks. The pressure drop at critical points must be compensated for by an increased compressor output and the associated additional energy requirement. Celsufpzkoqyx Nherb With DRYPOINT® RA, these operating costs can be reduced by almost half over a period of five years. The return on investment calculation shows the full potential of the new generation of refrigeration dryers: the devices pay for themselves within just six months of operation.

Condition: new, Exhibitor compressor Condition: very good Technical data: Pressure 10 bar Suction capacity 330 l/min Filling capacity 200 l/min Speed 1400 min-1 Vessel volume 24 l Weight 37.0 kg Sound pressure level 80 dB(A) Dimensions (WxHxD) 480x790x530 mm Drive power 2.2 kW Voltage 230 V Your advantages: * Mobile piston compressor * Applications: universally applicable * Powerful and durable * Directly flanged unit * Endurance runner * Oil-free * Robust plastic wheels for mobile transportation Volume: * Sound pressure level LPA: 80 dB(A) according to Dir. 2006/42/CE Crjlqyx Noufp Ecehsb * Sound power level LWA: No manufacturer specifications according to DIN EN ISO 3744 (RL 2000/14/EC) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Exhibitor - Gentilin oil-free compressor CSK330/24 Condition: Very good Technical data: Pressure 10 bar Suction capacity 330 l/min Delivery volume (5 bar) 200 l/min Speed 1400 min-1 Vessel vol. 24 l Weight 36.0 kg Sound pressure level 68 dB(A) Dimensions (WxHxD) 55 x 79 x 48 cm Drive power 2.2 kW Voltage 230 V The standard equipment of the Gentilin CSK330/24: * Quality electric motor with motor protection switch * Fully automatic switch-on and switch-off operation * High-quality CONDOR pressure switch * Pressure regulator for stepless adjustment of the working pressure Crolqyx Noufp Evehsb * One pressure gauge each for displaying tank pressure and working pressure * Quality quick-release couplings for compressed air extraction Gentilin oil-free all-rounder: powerful compressor for every application! Thanks to its professional features, the CSK330/24 oil-free compressor is a powerful and durable all-rounder. It is equipped with a quality electric motor with 2.2 kW motor power as standard. The oil-free operation of the unit makes it easier to start the compressor with low voltage consumption and low ambient temperatures. The Gentilin compressor is suitable for sensitive oil-free work such as painting, blowing out and cleaning, as well as for powerful nailing, stapling, drilling and chiseling. Recommended areas of application for your all-rounder: * Renovation, building trade, roofers, e.g. for nailing * Metalworking, e.g. for grinding * Painters and