Condition: new, Exhibitor compressor Advantages: Dcelqsufp Ikozv Ereg * HANDLICHER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar or increases performance and ensures high efficiency * Tank with baked-on inner coating * 15-year guarantee on tank against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) * Space-saving solution with upright tank Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Volume 500 l Weight 215 kg Noise 78 dB(A) Dimensions (WxDxH) 850x850x1945 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4 kW Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 a.m. - 5 p.m., delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to leave a note for the carrier on the front door or doorbell sign on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Clamping device PN 91120 D - single release Dcelqovcmifszv Ereg Higher pull-out values and smaller edge distances than with round-headed nails - Ideal for battening, as less splitting effect - Universal due to large length range - Also for structural timber construction Technical details: - Staple width: 11.76 mm - Wire dimension: 2.0 mm - Staple length: 65 to 120 mm - Magazine capacity: 125 pieces - Air consumption at 6 bar approx.: 2.5 l/shot - Weight: 5.1 kg The stapler is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Year of construction: 2001, Condition: good (used), Kaeser BSD 72 compressor Dcolemnqkioqzv Ersg

Condition: used, Year of construction: 1993, volume flow: 0.221 m³/h, nominal voltage: 400 V, pressure: 25 bar, rotational speed (max.): 780 rpm, Equipment: compressor, type plate available, Item condition: Used from stock Manufacturer: Boge Warranty in months: 12 Pressure (pmax): 25 bar Volume (max): 221 l/min Speed: 780 rpm Weight: 150 kg Dcelqermkpqozv Erog Storage location: Rosenfeld Storage location: LEO

Condition: excellent (used), Screw compressor Ecoair Djlqsvu S Idezv Erocg Type D40 Final pressure 10 bar Power 30 kW Read operating hours 58403

Condition: used, Year of construction: 2017, operating hours: 20,000 h, Functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Dolqzvjvx Nmfj Erscg Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided.

Condition: new, Exhibitor - Schneider compressor AM D 7-13 XVSDK Screw compressor Condition: Very good Features and benefits: * The graphically structured AIR ENERGIE CONTROL 3+ control unit makes it easy to operate the compressor * Extremely quiet compressors thanks to special noise insulation * Quiet and extremely efficient operation thanks to directly driven compressor stages with or without gearbox. * Highest economic efficiency High volume flow with low energy consumption - the variants are therefore BAFA-compliant * Easy maintenance Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts. No V-belt replacement necessary thanks to direct drive Technical data AirMaster Variable Speed compressor: Dcelqzv Ejufpzqorjg . 4152017980 Compression end pressure 13 bar Working pressure 5 - 13 bar Volume flow at working pressure 7 bar (ISO 1217) 270-1224 l/min Voltage 400 Volt Drive power 7.5 kW (400V/50Hz) Weight 281 kg Noise 64 dB(A) Air outlet 3/4" Dimensions (W x D x H) 1415 mm x 655 mm x 1045 mm

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails Dslqsvcl Sljzv Erjcg - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: - Release type Single release - Air consumption per driving operation 5.40 liters - Nail lengths from 90 to 130 mm - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2023, machine/vehicle number: ITJ781231, pressure: 10 bar, PRODUCT - MARK TYPE - MSM15D TM500 S/N - ITJ781231 YEAR - 2023 POWER (kW) - 15 OUTPUT. (m3/min) - 1.68 m3/min CIS (bar) - 10 BUILT. DRYER - yes Dcslqzvoqiz Acs Ersg ON TANK - 500L DOCUMENTS - YES

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Dolqovptx Tjzv Erecg Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: excellent (used), Screw compressor KAESER Dslqzjvu S H Tsv Erjcg Type AS 31 Motor 18 kW 7.5 bar

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 20 - 20 l/s - 1200 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 20 l/s Volume flow 1.20 l/min Volume flow 1200 m³/min Pressure dew point 3 °C Differential pressure 0.12 bar Power consumption 0.41 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 34 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.48 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Dolqjufp Anszv Erscg Refrigerant compressor, air-cooled condenser with fan, condenser pressure regulator Direct refrigerant injection with hot gas bypass valve * Dew point alarm as collective warning (potential-free contact) * Electronic control unit * Dew point temperature alarm symbol * Message symbol ambient temperature Optionally available * Spin

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: AIF041591, overall weight: 3,500 kg, volume flow: 1,188 m³/h, pressure (max.): 10 bar, Equipment: type plate available, We offer: ATLAS COPCO GA110 SN: AIF041591 YEAR: 1997 CAPACITY: (kW) 110 OUTPUT: (m3min) 19.8 CIS: (bar) 10 Delqjvyp S Rszv Erecg INVERTER: no BUILT-IN DRYER: no EXCHANGER: no COOLED: (AIR) air ON THE TANK: no DOCUMENTS: no CONNECTION: 2 1/2 NEW/USED: USED S013877

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 15 - 15 l/s - 900 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 15 l/s Volume flow 900 l/min Volume flow 0.9 m³/min Pressure dew point 3 °C Differential pressure 0.12 bar Power consumption 0.33 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 32 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation Dolqzjufp Ahsv Erecg installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.33 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with valve

Condition: good (used), Year of construction: 2005, PRODUCT - KAESER TYPE - CSD122T S/N - 1691 YEAR - 2005 POWER (kW) - 75 Dcolqjvkc Nqszv Ersg OUTPUT. (m3/min) - 12.01 CIS (bar) - 8

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 30 - 30 l/s - 1800 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 30 l/s Volume flow 1800 l/min Volume flow 1.8 m³/min Pressure dew point 3 °C Differential pressure 0.25 bar Power consumption 0.41 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 34 kg Compressed air connections 3/4 " Scope of delivery Dcslsufp Ausqzv Erjg * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.48 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with fan, condenser pressure regulator Direct refrigerant injection with hot gas bypass valve * Dew point alarm as collective warning (potential-free contact) * Electronic control unit * Dew point temperature alarm symbol * Message symbol ambient temperature Optionally available * Spin

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FX15 - 14 l/s - 840 l/min Condition: Very good Technical data: Volume flow 14 l/s Volume flow 840 l/min Volume flow 0.84 m³/min Pressure dew point + 3 °C Differential pressure 0.250 bar Power consumption 0.190 kW Operating voltage/frequency 230/1/50 Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Delqzveufp A Is Erocg Limit values: Ambient temperature min. 5 °C Ambient temperature max. 43 °C Inlet temperature min. 3 °C Inlet temperature max. 55 °C Operating pressure min. 6 bar Operating pressure max. 16 bar Dimensions, weights and connections: Length/width/height 493/350/450 mm Net weight 20 kg Compressed air connections 3/4 " Equipment features and special features The FX series refrigeration dryers offer a reliable, cost-effective and simple solution for anyone who requires high-quality compressed air for their production processes. To avoid condensation and thus the risk of corrosion and damage to systems and end products, the compressed air must be dry - which is exactly what the FX dryers are designed for. The FX dryer range is simple yet robust and reliable. It is a simple range that relies on proven technology, solid components and a straightforward design; these features combine to deliver a constant dew point and reliable performance at any volume flow - in almost any production application. Functional principle Refrigeration drying means that the compressed air is cooled, resulting in a large amount of water that must be separated from the air. After cooling and condensation, the compressed air is reheated to around room temperature so that no condensation forms on the outside of the pipe system. This heat exchange between incoming and outgoing compressed air also reduces the required cooling capacity of the refrigerant circuit. Cooling takes place via a closed refrigerant system. Direct refrigerant injection reacts immediately to a load change and a high-precision hot gas bypass valve ensures a constant temperature ratio

Condition: new, Exhibitor compressor Features: * Durable, V-belt driven compressor blocks Dcolqzeuzn Spev Ereg * Motor and compressor protection against overheating * With integrated refrigeration dryer mounted on tank and fine filter * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: . H707106 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.1 m³/min Compressor speed 4,523 min-1 Rated power drive motor (V/Hz) 7.5 kW (400V/50Hz) Motor efficiency 90.1 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,260 m³/h Ambient temperature min. / max. +5°C / +40°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 63 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1550 mm x 690 mm x 1560 mm Weight 346 kg Technical data refrigeration dryer DK 1200 SMART: Volume flow at pressure dew point +3°C 1200 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.27 kW Air connection 3/4 "a Refrigerant charge R134a

Condition: new, Exhibitor - Schneider industrial compressor AM D 11-13-500 XVSBDK speed-controlled with refrigeration dryer and integrated fine filter Features and benefits: * The graphically structured AIR ENERGIE CONTROL 3+ control unit makes it easy to operate the compressor * Extremely quiet compressors thanks to special noise insulation * Quiet and extremely efficient operation thanks to directly driven compressor stages with or without gearbox. * Highest efficiency High volume flow with low energy consumption * Easy maintenance Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts. No V-belt replacement necessary due to direct drive Technical data: AirMaster Variable Speed compressor: . 4152018487 Compression end pressure 13 bar Working pressure 5 - 13 bar Volume flow at working pressure (ISO 1217) 264-1824 l/min Rated power drive motor (V/Hz) 11 kW (400V/50Hz) Sound pressure level (LPA1 -DIN 45635 T13) 64 dB(A) Connection air outlet 3/4 "i Tank capacity 500 liters Dimensions (W x D x H) 1935 mm x 655 mm x 1680 mm Weight 465 kg Dcolqjuzn Sijzv Erog

Condition: new, Exhibitor (H911100) Condition: very good Features: * Durable, V-belt driven compressor blocks * Maximum operating convenience thanks to AIR ENERGIE CONTROL 3+ electronic control system with direction of rotation control, display of operating hours, maintenance schedule, service messages, load hours, etc. * BAFA-capable * Optimum adjustment to the actual air consumption thanks to speed control * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Enormous time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts and direct drive * Extremely quiet due to soundproofed housing * Simple installation of an exhaust air duct thanks to upward exhaust air routing * Prevents expensive damage during commissioning thanks to integrated direction of rotation control * Incl. high-quality microfilter (supplied loose) Technical data AirMaster Variable Speed compressor: Delqjuzn Svezv Erjcg . H911100 Compressor discharge pressure 12.5 bar Working pressure 5 - 12.5 bar Volume flow at working pressure (ISO 1217) 264 - 1,824 l/min Compressor speed 7,597 min-1 Rated power drive motor (V/Hz) 11 kW (400V/50Hz) Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 2,200 m³/h Ambient temperature min. / max. +2°C / +40°C Oil capacity 4.7 l Sound pressure level (LPA1 -DIN 45635 T13) 64 dB(A) Air outlet connection 3/4 "i Tank capacity - dimensions (W x D x H) 1165 mm x 655 mm x 1045 mm Weight 251 kg

Condition: new, Exhibitor unit - Refrigeration dryer DRYPOINT® RA 50, the most economical way to dry compressed air Delqzvjufpzks Erjcg - incl. level-controlled condensate drain BEKOMAT - Technical data: Volume flow (m³/h)* 51 Volume flow (m³/min)* 0.85 Volume flow ( l/min)* 850 Power consumption (kW) 0.22 Compressed air loss (deltap [g]) 0.08 Air connection G1/2 BSP-F Dimensions (mm / HxLxW) 740x345x420 Max. Max. compressed air inlet temperature (C°) 70 Min./max. operating pressure (bar [g]) 4/16 Min./max. ambient temperature (°C) 2/50 Electrical connection 230 V, 50-60 Hz, 1ph. The DRYPOINT® RA advantages at a glance * Best drying due to highly effective heat exchanger combination * Lowest pressure loss, even with varying loads * Excellent price-performance ratio * Highest efficiency, lowest energy consumption * BEKOMAT® inside * Environmentally friendly refrigerant DRYPOINT® RA: an investment that pays off Operating costs, not investment costs, determine the profitability of refrigeration dryers. Over an operating period of five years, only between 20 and 30 % of the total costs are accounted for by the pure investment. In contrast, 70 to 80 % is made up of running operating costs. One third each of these result from electricity costs, compressed air resistance in the system and compressed air losses due to leaks. The pressure drop at critical points must be compensated for by an increased compressor output and the associated additional energy requirement. With DRYPOINT® RA, these operating costs can be reduced by almost half over a period of five years. The return on investment calculation shows the full potential of the new generation of refrigeration dryers: the devices pay for themselves within just six months of operation.

Condition: new, Exhibitor compressor Condition: very good Technical data: Djlqeufp Ecozv Erecg Pressure 10 bar Suction capacity 330 l/min Filling capacity 200 l/min Speed 1400 min-1 Vessel volume 24 l Weight 37.0 kg Sound pressure level 80 dB(A) Dimensions (WxHxD) 480x790x530 mm Drive power 2.2 kW Voltage 230 V Your advantages: * Mobile piston compressor * Applications: universally applicable * Powerful and durable * Directly flanged unit * Endurance runner * Oil-free * Robust plastic wheels for mobile transportation Volume: * Sound pressure level LPA: 80 dB(A) according to Dir. 2006/42/CE * Sound power level LWA: No manufacturer specifications according to DIN EN ISO 3744 (RL 2000/14/EC) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Exhibitor - Gentilin oil-free compressor CSK330/24 Condition: Very good Technical data: Pressure 10 bar Suction capacity 330 l/min Delivery volume (5 bar) 200 l/min Speed 1400 min-1 Vessel vol. 24 l Weight 36.0 kg Sound pressure level 68 dB(A) Dimensions (WxHxD) 55 x 79 x 48 cm Drive power 2.2 kW Voltage 230 V The standard equipment of the Gentilin CSK330/24: * Quality electric motor with motor protection switch * Fully automatic switch-on and switch-off operation * High-quality CONDOR pressure switch * Pressure regulator for stepless adjustment of the working pressure * One pressure gauge each for displaying tank pressure and working pressure * Quality quick-release couplings for compressed air extraction Gentilin oil-free all-rounder: powerful compressor for every application! Dcslqzv Ejufp Evsrog Thanks to its professional features, the CSK330/24 oil-free compressor is a powerful and durable all-rounder. It is equipped with a quality electric motor with 2.2 kW motor power as standard. The oil-free operation of the unit makes it easier to start the compressor with low voltage consumption and low ambient temperatures. The Gentilin compressor is suitable for sensitive oil-free work such as painting, blowing out and cleaning, as well as for powerful nailing, stapling, drilling and chiseling. Recommended areas of application for your all-rounder: * Renovation, building trade, roofers, e.g. for nailing * Metalworking, e.g. for grinding * Painters and

Condition: new, Exhibitor compressor Gentilin compressor ESK480/100 - oil-free & quiet! Operating hours approx. 1 h Your advantages: * Quiet & oil-free * Applications: universally applicable, thanks to the low noise level * Powerful and durable * Container additionally coated on the inside * Robust plastic wheels for mobile transportation Dcjlqzvoufp Eij Erog * Extendable handle for a secure hold during transportation Technical data: Pressure 10 bar Suction capacity 480 l/min Filling capacity 300 l/min Speed 1400 min-1 Vessel volume 90 l Weight 85 kg Noise level 74 dB(A) Dimensions (WxHxD) 1003x700x380 mm Drive power 3.1 kW* Voltage 400 V NOTE: 100 % duty cycle. Volume: * Sound pressure level LPA: 74 dB(A) at a distance of 4 m according to 79/113 EEC, L (PA4) * Sound power level LWA: No manufacturer specifications according to DIN EN ISO 3744 (RL 2000/14/EC) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to put a note on the door of your house or apartment or on the doorbell on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Schneider compressor UniMaster CLEAN - UNM 255-8-30 WXS Clean * Direct flanged 2-cylinder piston compressor * 15-year warranty on tank against rusting through * Operating hours counter for checking the actual running time * Oil-free, low-maintenance unit for compressed air in its purest form Dslqzeufp E Njv Erscg * Low temperature and optimum cooling for guaranteed 80 % duty cycle * Extremely quiet thanks to sound insulation hood Technical data Pressure 8 bar Suction capacity 240 l/min Filling capacity 170 l/min Drive power 1.5 kW Voltage 230 V Speed 1450 1/min Tank volume 40 l Weight 50 kg Noise 56 dB(A) Dimensions WxDxH 600x460x890 Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to leave a note for the carrier on the front door or doorbell sign on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.