Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. Ijdsrivv Ejpfx Ah Uebf The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispensing system, oil station, fuel pump, tank data recording, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Volume flow: 1 to 10 l/min -Engine: Hanning 0.55 kW -Pressure vessel: volume 2.8 liters -Individual components: see photos Iodpfow A Nddox Ah Uebf -Number: 2x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/piece

Condition: used, Year of construction: 2022, functionality: fully functional, Available for sale are 3 Minebea Intec in-line checkweigher filling stations from 2022. Unit price: €5,000 each. Conveying direction: left to right Control unit position: right side (in the direction of travel) Drive unit position: left side (in the direction of travel) Ejection system: customer-supplied ejection system Weighing conveyor axle spacing: 300 mm Weighing conveyor belt width: 250 mm Ibedpfx Ahjxdxb Ss Ujf Weighing conveyor transport medium: standard white belt Infeed conveyor axle spacing: 300 mm Infeed conveyor belt width: 250 mm Infeed conveyor transport medium: standard white belt Discharge conveyor axle spacing: 300 mm Discharge conveyor belt width: 250 mm Discharge conveyor transport medium: standard white belt Standard conveyor height: 450-1100 mm Transport height (450-1100 mm): 740 mm Speed range: 0.2 – 1.0 m/s Protection class (IP): IP54 (standard) Photoelectric sensors: reflection photoelectric sensor (standard) Compressed air monitoring: not required Ejection monitoring CW: not required Trend controller: 3-point controller with +/- control signal Ejection monitoring MD: not required For further questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2009, functionality: fully functional, type of input current: three-phase, power of the servo motor: 4,000 W, tank capacity: 370 l, Bulk material mixer, e.g. rubber granulate, with drum (1,000 x 480 mm D x H), control system, and screw conveyor. Ibodpfx Ahexnyd Ns Usf

Condition: used, TELFAFILL / Filflexx 6-head filling machine – model TF5500CMx6M21D This fully equipped filling machine is mounted on a sturdy stainless steel frame with castors, making the installation easy to move. Ideal for precise filling of liquids in the food, cosmetics or pharmaceutical sector. Iodpfxowinxgo Ah Uobf Specifications: Type: TELFAFILL TF5500CMx6M21D Number of filling heads: 6 (pneumatically operated, with flexible hose valves) Construction: Completely stainless steel (RVS) Dimensions: 115 x 60 x 180 cm (W x D x H) Control: Siemens SIMATIC Touch Panel Mobile: Equipped with wheels for easy movement Equipped with: Integrated agitator in the hopper Liquid level detection Quick couplings and food-grade hoses Siemens HMI touchscreen for easy operation Emergency stop, start/stop buttons and safe access to control cabinet This machine is ready to use and in good condition, including complete hose set and filling nozzles.

Condition: used, Year of construction: 2015, functionality: fully functional, Description: Complete automatic weighing and bagging system for free-flowing granular or crystalline products such as fertilizers. The line consists of: Automatic Net Weigher NET/G Based on CBC weighing system Gravity infeed system Stainless steel product-contact parts (AISI 316) Electronic microprocessor control with LED display Pneumatic flow regulation Dust extraction connection Designed for 25, 40, and 50 kg bags Automatic Bag-Forming Machine FFS-E 900 Forms and seals polyethylene (PE) bags from tubular reel Up to 900 bags/hour (product dependent) Dual sealing stations (bottom and top) Bag length control via encoder and photocell Isdpfx Ahewqfads Ujbf Vibrating device for product settling Siemens PLC control, operator terminal TP177B Stainless steel and anti-corrosion construction Complete with conveyors and safety guarding Suitable For: Granulated fertilizers, urea, crystalline chemicals, resins, salt, and other free-flowing materials. concetti, net/g, ffs-e 900, automatic bagging machine, bagging line, form fill seal, ffs bagger, polyethylene bagging, used bagging machine, net weigher, industrial packaging line, free-flowing materials, fertilizer packaging, granular materials, crystalline products, sack filling, open-mouth bagger, reel-fed bagging machine, palletizing line, PE bag machine, AISI 316, stainless steel bagging, Siemens PLC, automated bagging system, bag making machine, fertilizer line, urea bagging, bagging with sealing, industrial automation, CE marked, second-hand packaging machine, heavy-duty bagger, bulk material bagger, precision weighing, dosing system, bag closing system, automated filling system, eurodrive motors, modular bagging solution, bagging and sealing system

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio vacuum CS1. The new price was €1,750. Ijdpexiv Erofx Ah Usbf

Condition: used, Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station -Manufacturer: workshop technology, mobile oil dispenser with hand pump -Tank capacity: approx. l -Pump: hand operated Ibjdpfxokahldo Ah Uef -Hose: lockable with tap -Dimensions: 430/400/H770 mm -Weight: 15 kg

Condition: excellent (used), functionality: fully functional, Automatic machine for filling and sealing bags with liquid. Originally designed for aseptic filling and sealing of infusion bags. Five-nozzle filling machine. Process description: 1st station – Manual placement of the bag into the starwheel Iedpfx Aow Ac Eboh Uebf 2nd station – Cutting open the filling port; the cut-off piece is removed by vacuum into a separate container 3rd station – Start of filling 4th station – Continued filling 5th station – Continued filling 6th station – Continued filling 7th station – Finalise filling 8th station – Sealing of the filling port 9th station – Ejection of the filled bag Filling is performed using overpressure through a central feed pipe. Each filling station is equipped with SIRAI valves that close a silicone filling tube (no moving parts in contact with the liquid, which facilitates cleaning and validation). Each individual filling station can be set on the control panel via timer (millisecond accuracy). Filling volume is adjustable from 100 to 3000 ml. The machine is constructed entirely from stainless steel 316, suitable for pharmaceutical production, and is mobile, mounted on wheels. The equipment is technically simple, easy to maintain, and highly compact (footprint less than 1 square metre).

Condition: good (used), Stainless steel Big bag filling machine filling station Adjustable in height Suitable for big bag height: 1650mm - 2750mm Completely stainless steel Equipped with connection for inflating big bag Equipped with connection for dust extraction Iedpswyfwnefx Ah Uebf Total height: +/- 3200mm Connection diameter big bag 350mm See our other advertisements VMA Wekerom

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, tank capacity: 1 l, controller manufacturer: Siemens, TECHNICAL DETAILS Filling volume: 0.1 - 1.0 liters Filling medium: for example sauces, dressings, spirits, dressings or mayonnaise Filling method: below-level filling to reduce foam formation Performance: 6,000 bottles per hour (at 250 ml) Filling stations: 16 Closure elements: 4 Control: Siemens Container compatibility: plastic and glass bottles Direction of travel: left to right Ibjdpfjv Hp Swex Ah Usf EQUIPMENT - Filler - Capper - Cap sorting unit - Cap feeder

Condition: new, Year of construction: 2025, Automatic Sleeve Labelling Machine with a capacity of up to 400 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; label Ø: 28-50 or 50-95 or 95-125mm; label length: 35-300mm; label thickness: 0.035-0.08mm; power: 2kW; machine dimensions: L6400xW1100xH2600mm; weight: 1500kg. Iodpev Nlavofx Ah Uobf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station, oil slinger -Handover: in the current condition as seen Ibsdpfxjkahi Ae Ah Uef -Level indicator: missing, see photos for condition -Manufacturer: Tecalemit, mobile oil dispenser with hand pump -Item no.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand operated -Hose: lockable with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20037E2006, total width: 700 mm, total length: 700 mm, total height: 1,540 mm, type of input current: three-phase, filling weight (max.): 250 g, filling weight (min.): 5 g, compressed air connection: 6 bar, overall weight: 500 kg, year of last overhaul: 2025, Used Axomatic AXO 700 tube closing machine suitable for filling and closing aluminium tubes. Method: This machine automatically fills the tubes, closes the aluminium tubes through 4 folding stations, puts a code in the seal and automatically ejects the tubes. The tubes are fed and oriented manually. This machine is set up in our showroom where we are happy to demonstrate the machine. Contact us for an appointment. Technical details: - Min/Max diameter aluminium tubes: 13 – 42 mm. - Tube length from 60 to 250 mm. - The tube holder with tube is lifted 55 mm over the filling pipe during filling. - Min/Max dosage: 5 – 250 ml. - The dosage quantity can be set outside the machine and can be read on a counter. - Capacity: max. 1,200 tubes/hour (mechanical speed). The actual achievable capacity is partly dependent on the operator, the tube quality and the viscosity of the product to be filled. - Electric drive by means of an electric motor of 0.37 kW, 380 Volt, 50 Hertz. - All product contact parts are made of stainless steel 316, suitable for pharmaceutical and cosmetic products. - Rotating table, adjustable in height, with readout of the set heights. - No tube/no filling device. - Coding unit for the tubes Iedpfxewnrrbj Ah Uebf - Automatic ejection device for the tubes. - 7-station table. - Standard hopper with lid 55 liter capacity. - Machine frame and plating are made of stainless steel and is equipped with an anti-drip lock on the base, so that no product can enter the drive section. - Stepless speed control from the dashboard. - Security doors and casing made of stainless steel frame with plexiglass and door security. - Direct machine drive without chain. - Electric control box housed in the frame of the machine.

Condition: new, Year of construction: 2025, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops. The system includes an container unscrambler, which sets the small bottles into an infeed line. Module to clean the bottles (water/gas) and inside/outside tucks (cap parts), filling and labelling the bottles. The system is PLC controlled. The total 3 cleaning processes with water plus the 3 cleaning processes with gas assures a very high cleaning standard without any water remaining. All liquid touching parts are made of stainless steel SS316 completely. - Specifications: Filling precision: < +/- 0.5%; max. speed of the machine in neutral: 120 bottles/minute; filling capacity: 5-30ml; 380V, 3.8kW; 6bar. All these specifications only are sample specifications. Depending on the final working process they will vary. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Ibjdov Nlbtopfx Ah Uef Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Oil conveyor, hose reel, automatic hose reel, oil hose reel, hose unwinder, tank hose reel, wall reel -Hose reel: Automatic hose reel -Hose length: 6600 mm -Dimensions: 740/150/H52 mm Ibodpfx Ajvx Rbdoh Usf -Weight: 22 kg

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-120ml; accuracy: ±1%; tube diameter: 10-28 mm (one mould is required for each tube diameter); tube length: 50-180 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iedpfev Nldhox Ah Ujbf

Condition: used, oil hand pump, oil pump, fuel hand pump, hand lever pump, hand pump, oil drum pump, oil drum pump -Manufacturer: ABG pumps, hand pump for oil and fuel Iodpfx Aet Rbh Ush Ujbf -Barrel screw connection: M 64 x 4. -Dimensions: 270/60/H290mm -Weight: 1.1 kg

Condition: new, Year of construction: 2025, I-, Z-, or L-shaped belt conveyor to transport small and large, wet, frozen products towards the weighing head unit. Open construction, corrugated sidewalls, water proof, parts in contact with the product are made of polyurethane and are certified to FDA 21 CFR 177.2600. - Specifications: dimensions of conveyor boxes: L(according to product requirements)xW250xH50mm; stainless steel frame; conveying speed: is adjustable; conveyor dimensions: L(depending on the gradient)W450xH3500mm. Iedjv Nmmdopfx Ah Ujbf That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Oil cabinet, oil cabinet, oil conveyor, oil dispenser -with counter -Extraction hose with nozzle -Compressed air connection Ijdpfeb A Igvjx Ah Uobf

Condition: new, Year of construction: 2025, Auger Filler with weight feedback (after the dosing process has been completed) via connected weigher. Automatic version with link belt conveyor for transport of cans, jars, containers. Suitable for dosing and filling powdery products into cans, jars, or other controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 1-1000g; accuracy (depending on product and total weight): 1-100g max. ±2%, 100-1000g max. ±1%; max. speed of the machine in neutral: 25 cycles/minute; hopper volume: 25L (standard), 35L (on request); power supply: AC220~380V, 3-phase; power consumption: 1.2kW; compressed air and compressed air consumption: 0.6MPa, 0.5m³/min; machine dimensions: L1500xW760xH1850mm; weight: 160kg. Iedpfx Aew D Elaeh Uobf

Condition: used, Hand oil pump, ecabinet, oil cabinet, oil conveyor, oil dispenser Ibedeb A Hf Uepfx Ah Usf -Content: approx. 60 l -Compressed air pump -Hose with tap -Transport dimensions: 500/500/H950 mm -Weight: 35 kg

Condition: new, Year of construction: 2025, Rotary filling machine to fill liquids, pastes, powder, bulk goods into pre-made cups and sealing them with film. The machine can be equipped with a module for capping the cups with a hard plastic/hard shell lid (at a surcharge). The AMTEC filling and sealing machine can handle different cup types, shapes and dimensions and is flexible in the type of product to be filled. The product must only have flow properties such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. Automatic operation from feeding of cups, filling, opening of cups, sealing with foil (capping with a lid, optional), collecting of cups / containers. The dosing unit (e.g. volumetric pump with an external tank, auger filler, etc.) is included. Easy operation due touch screen monitor. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling volume: customized; cup/container dimensions: customized; number of filling heads: max. 2; film type: suitable for sealable mono and composite films; product contact parts made from SUS 304; current: 220/380 V, 3kW; machine dimensions: approx. L1100xW1100xH1983 mm; weight: approx. 800 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Isdpfxov Nkzrs Ah Uobf

Condition: new, Year of construction: 2025, Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the automatic lid capping machine. The positioning and closing of the lids are fully automatic. - Specifications: filling range: 30-3000ml; number of filling heads: 2; max. speed of the machine in neutral: 50 cycles/minute; SUS304, product contact parts from SUS3316; dimensions and weight of the packaging system depending on the final layout. Ibodjv Nk R Hopfx Ah Uof Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vibration Feeder (volume ca. 160 l), infeed container for product with vibrating mechnism to supply product to infeed conveyor, stainless steel, L800xW880xH1100mm, 150/250kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ibsdpfxsv Nmlmj Ah Uef