Used Fngj 32 for sale (7,788)

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Gjlhsxc It Isccqkeud Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: good (used), Year of construction: 1980, TOS FNGJ 32 Milling Machine Year of manufacture: 1980 Equipped with Heidenhain TNC 135 control With accessories Table size: 800x400 mm Spindle speeds: 40–2000 rpm Longitudinal and cross feeds: 8–400 mm/min Guolsx U Eb Aehccqked Vertical feeds: 4–200 mm/min Distance from horizontal spindle axis to table surface: 125–525 mm Distance from vertical head spindle axis to table surface: 58–458 mm X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Guelhsw Uriroccqked

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Guolhccsxg H Hhjqksd

Condition: good (used), functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg Guslsvzkzcjhccqked

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. Golhszgc U Usccqkeud The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: used, In this offer you purchase a used "EMC Isilon X400 - 32 TB " Agility and Flexibility: EMC Isilon X-Series is the first scale-out storage solution capable of scaling throughput from a few terabytes to over 20 petabytes and over 100 gigabytes per second (GBps), all within a single file system. Sale item: 1 x EMC Isilon X400 - 32 TB + 400G SSD/ 48G/ 2x10GE SFP + 2x1GE with the following equipment: 3x32 TB HDD/400GB SSD 3.5" 3x48GB Ram, 12X4G 6x6 metre CX42QSFP Hybrid Cable 3x KIT 2SFP + Optic 10GB (ISO00125223, -227, -388) 2x QLogic 18 Port QDR Switch (CNVS491200146, CNVS491200150) 10 GBE, Dual-Port SFP + Without Optic Isilon Software Upgrade Enterprise Snapshot IQ Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). Guelorxcvdshccqked (minor scratches or yellowing). The device has been functionally tested and is equipped with the latest Isilon OneFS8 software. Shipping is possible on request!

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION LOCATION - POLAND Golhcoya I Sgocqkjud READY FOR SHIPPING

Condition: like new (used), Year of construction: 2016, TETRA PAK CARDBOARD PACKER CBP 32 V400 NEW CONDITION, FOR MULTI CARTON FORMATS LAST VERSION 600V YOM 2016 5477 RUNNING HOURS ONLY!! NORDSON PROBLUE FLEX UNIT NEW CONDITION Guelhccqsylny Ueksd LOCATION - POLAND READY FOR SHIPPING

Condition: excellent (used), For sale: Siemens 1FK6083-6AF71-1GH0 servomotor. /////This offer applies to 1 unit, as shown in the photos.///// Used motors, technically functional, in good visual condition. Normal signs of use and storage. Goley Umvzshccqkoud Technical data: Manufacturer: Siemens Model: 1FK6083-6AF71-1GH0 Torque M0: 16.0 Nm Torque MN: 9.5 Nm Current I0: 10.4 A Current IN: 6.9 A Voltage: 306 V Max. speed: 5600 rpm Nominal speed: 3000 rpm Protection class: IP64 Encoder: A-32 Brake: 24VDC 21W Made in Germany Condition: used technically functional shaft rotates correctly complete as shown in the photos Application: CNC machine tools industrial automation servo drives machine modernization

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Gslhccqoufgb Iokeud

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading Guoljxizcvjhccqksd • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: used, functionality: fully functional, rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Golhsud H Sdjccqkeud Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Weight: 50kg Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm Guslhccqjfhgzaeked -maximum thickness of book block; 50mm -power supply; 220 V -input power; 0,1 kw -weight; 75kg -dimension; 60c110c132cm

Condition: excellent (used), Meat grinder Omega 32. Golhox Ndqrsccqksud Wihout stand 1900 € With stand 2100 €

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm. Guelhcey Hixvscqksd

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm Gelhcszi Dc Sscqkoud motor compressors and panels not included

Condition: good (used), Year of construction: 2008, 3-axle VEREM tank carrier Year 2008 Platform length 9.20 m GVWR 42 T Payload 32 T Gooseneck length 3.40 m Guelsup Ih Eshccqksd

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 10,993 h, load capacity: 13,600 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, power: 140 kW (190.35 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,100 kg, total length: 5,150 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift – diesel Load centre: 1200 Mast type: Duplex Transmission: Clark HR28000 Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 12.00-20 Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres size: 12.00-20 Guelhcjzllh Uecqkod Rear tyres condition: 20 - 40% Sideshift, fork positioner, hydraulic sideshift + fork positioning

Condition: new, Heidenhain LC 192F length measuring system, ML 740 mm, item no. 387 093-32, serial no. 19543276H, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Golsi Eal Rehccqkeud

Condition: ready for operation (used), Schmalenberger ZHT4 32-13/2-7.5 submersible pump, serial number: 9700005166/1, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Guolsi D Nvcjhccqkod

Condition: good (used), Weiss SC 450 Corrosion Testing Device Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing device / salt spray testing chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight, empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Testing Procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial application. Operating hours according to display: approx. 37,926.6 h Optical condition as shown in the pictures. Guslhjzbatreccqkod Interior with visible deposits / corrosion marks due to use. Device can be switched on, display is active. Inspection and testing on site possible by arrangement. Scope of delivery: see pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Gjlhccjcnxa Seqksud Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Gujlhccjxw N N Hoqkjd EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Gujlhccoy A Tpqeqksd Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -