HELDALIX Paweł Hełdak

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment Kjdpoz Sva Hjfx Abvsnc

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, total length: 4,200 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,000 rpm, total height: 2,800 mm, total width: 2,300 mm, overall weight: 13,000 kg, power: 28 kW (38.07 HP), New Hydraulic hose New Sealings New Covers Optional Retrofitting possible   New Controller  New SPS - SIEMENS  Main Power 28 kW Steel telescopic covers CE-Safety fence with door    Optional tooling for Parabolic 1200 mm Old owner machined 3 mm aluminum parts  Commisioning, Training, Tool, Installation Possible !! Max. blank / workpiece over bed:1500 Centre height over bed: 750mm Distance between centers: 1225mm Knsdpfxozvf N Te Abvjc Maximum sheet thickness: 7mm Stroke X-Axis: 360mm Stroke Y-Axis: 800mm Speedrange: 100 - 1000Rpm Power: 28kW Spindle taper head stock: 11DIN / Camlock Stroke pinole quill: 300mm Length: 4200mm Width: 2300mm Height: 2800mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2011, operating hours: 15,620 h, functionality: fully functional, center width: 1,400 mm, center height: 500 mm, center height in crank: 500 mm, spindle motor power: 30,000 W, total length: 4,560 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 2,200 rpm, quill diameter: 70 mm, quill stroke: 750 mm, feed force X-axis: 65,000 N, feed force Z-axis: 65,000 N, feed length X-axis: 310 mm, feed length Z-axis: 600 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, power: 45 kW (61.18 HP), warranty duration: 12 months, The machine is in very good condition and has been completely overhauled by us. We offer a 12-month warranty. We would also be happy to provide installation, commissioning, and training services. Knjdpfxozluh Ro Abvsc Training in metal forming or product development is also available and offered separately. The machine is equipped with a Sinumerik 840 D CNC control system, including playback software.

Condition: good (used), Year of construction: 1979, functionality: fully functional, center width: 2,840 mm, center height: 1,200 mm, center height in crank: 1,700 mm, spindle motor power: 28 W, spindle speed (min.): 5 rpm, spindle speed (max.): 540 rpm, quill stroke: 750 mm, feed force X-axis: 75 N, feed force Z-axis: 110 N, workpiece weight (max.): 3,000 kg, input voltage: 400 V, The machine is in good condition; the control cabinet was replaced 10 years ago. Kjdpfxey S A Tds Abvenc The machine is currently disassembled and stored in the warehouse. If required, we can install the machine and provide training.

Condition: used, Year of construction: 2021, operating hours: 120 h, functionality: fully functional, For sale: Victaulic RG 3210 grooving machine for forming pipe ends D60.3 – 323.9 mm. The machine was used for approximately 1.5 years as part of a pipe assembly manufacturing project. Accessories include: lower/upper grooving tool 88.9 – 168.3 mm stainless steel, pipe support stand. As the project has ended, we no longer require this equipment. Original price: 184,440 CZK. Kjdpfx Aey Hpatsbvenc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Kjdpfx Aoyn Rhyjbvenc Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: good (used), Year of construction: 1980, Spinning machine LEIFELD Knsdpfxex Ttple Abvsc Spinning moulds

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, I am selling a tetno machine, connected, can be tested. Nominal force: 4000 kN Ram stroke: 1000 mm Kjdpfx Abexwlvpsvjnc Passage between columns: 3100 mm Table clamping area: 3100 x 6000 mm Electric motor power: 15 kW Machine dimensions lxwxh: 6000 x 4150 x 4170 mm Press weight: 43800 kg Can send a video of the machine, via whatsapp application

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Kedpfx Aoxtaxwjbvjnc Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Kedpfx Aoxp Sfhobvjnc Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, quill stroke: 300 mm, overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, Hand spinning machine, make Schulte Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2000 rpm (stepless adjustment) Spindle mount: M 36 Manual tool rest Tailstock stroke: 300 mm (quill travel via handwheel) Machine weight approx.: 800 kg Ksdexp Sc Hjpfx Abvonc Machine description: - Powerful, robust spinning machine - Overhauled and ready for operation - Main spindle newly bearing-mounted - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control - Newly painted

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Centre height: mm 350 Ksdpfx Abjxp Sb Ajvonc Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm Knedpfxoq Dqdij Abvec rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Knedpokvnuujfx Abvoc Column arm 250 mm Troath arm 900 Height arm 1400 mm