Spinning machine LEIFELD Spinning moulds

LEIFELD

Condition: good (used), Working diameter Ø 2400mm Max sheet thickness: 9,5 mm Ihodpfeucdh Tjx Addjt

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Ihedpfjrypmgex Addet Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: refurbished (used), Spinning Machine, LEIFELD, Type PLB 400 - Gearbox with circulating oil lubrication - Shaping unit (optional) - Oil-air cooler Technical specifications: Blank diameter (max.): 800 mm Distance between centers: 950 mm Tool holder DIN 55027: Gr. 8 Force axis (transverse) (max.): 12 kN Force axis (longitudinal) (max.): 28 kN Stroke (transverse): 275 mm Stroke (longitudinal): 415 mm Feed axis speed (transverse) (max.): 2.0 m/min Feed axis speed (longitudinal) (max.): 2.0 m/min Ejector stroke: 150 mm Ihedpfx Adjxpf Ipedet Tailstock stroke: 650 mm Spindle speeds (9 steps): 108-1.084 rpm Main drive (DC motor): 5,5 kW Hydraulic drive: 5.5 kW Operating Voltage: 400V Frequency: 50Hz Connected load approx. 12 kVA Weight: approx. 3.000 kg

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Iedpfsq Dqdijx Addjht Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2011, arm length 2500 mm total column height 3100 mmm weight max. in kg 125 kg swivelling range 270 Grad Iodjvrk Ahspfx Addoht height over floor 3254 mm weight 945 kg ABUS SV pillar jib crane with chain storage and electric ABUS chain hoist, inspection book available. Crane is dismantled and ready for shipping - see last photo. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Ihedpfx Adextaxwjdjt Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition Iodpfoxp Sb Ajx Addeht - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: new, Year of construction: 2025, The main features, functions and advantages of the welding positioner are: Functions: 1. Direction of rotation switch: Allows you to control the direction of rotation of the rotator disc. 2. Direction of rotation switch: Allows you to change the direction of rotation of the disc. 3. Smooth regulation of the plate rotation speed: Thanks to this function, you can adjust the rotation speed of the plate to a specific job. 4. Compact, compact design: The solid construction ensures the durability and strength of the device. 5. Control pedal: Makes it easier to control the operation of the positioner. 6. Thermal fuse: Provides additional safety during operation of the device. 7. Brush motor: A brush motor is a type of DC electric motor that can be effective in various applications. 8. Plate tilt range 0 - 90°: The ability to tilt the rotator disc from 0 to 90 degrees is useful for welding in different positions. 9. Possibility of mounting a centering holder: Allows additional centering of elements. Advantages: 1. Higher work efficiency: The positioner helps increase efficiency in assembly and welding processes. 2. Reduction of production costs: Automation or facilitation of rotation of elements can contribute to lower production costs. 3. Repeatability of made joints: The device helps to maintain the consistency and quality of joints. 4. Flexibility in use: The ability to adjust the speed and direction of rotation makes the device flexible in adapting to various tasks. 5. Improved working conditions for the welder: Allows the welder to work more comfortably and in comfortable positions during welding. The set includes: 1. PS-500 positioner device. 2. Control pedal. 3. Power cable. 4. Operating instructions. 5. Mast with welding torch. The PS-500 positioner from CORMAK is a valuable tool in the industry that requires rotation and positioning of elements, especially during welding processes. It helps to increase efficiency, reduce costs and improve the quality of work. Technical parameters: Ihsdpfxerigmgo Addot Maximum load 300kg Worktable size φ500mm Tilt angle 0° ~ + 90° Rotation speed 0.2 ~ 2.5 rpm Rotation power 200W Tilting speed manual Voltage 220V-1PH-50HZ Weight support Dimensions 700x650x710 Weight 97kg *three-jaw chuck is not included

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Iodpfxjvcfhme Addsht Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Manual spinning machine make Leifeld Type Plb 300 - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrics and buttons - operation new - New paintwork Technical data Tip height mm 350 Tip width mm 800 Machine length mm 2100 Spindle motor kW 4.0 Iedpfx Aderdzv Rsdsht 4-speed gearbox Speeds approx. 1/min 200 - 1000 Spindle holder M60 DIN 800 Hand steel support Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1100 Special equipment built into the machine - Tip height mm 350 - MK 3 ball bearing pressure center - Stepless spindle speed control in the indexing steps by frequency-controlled drive motor - Electrical switching - Circulating oil lubrication On request: - Cross support PS30/300

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t Ihsdevzxphopfx Addot dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Iedpfsxfiq Hjx Addsht

Year of construction: 1986, condition: ready for operation (used), Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout. Ihsdpehp N Ucofx Addot

Year of construction: 1982, condition: good (used), Motorized round bending machine FASTI type: 106-20-2 year 1982 Bending capacity : 2040 mm X 2 mm in steel Isdpfek Iymxjx Addsht Rollers diameter 110 mm , with bending . Roll drive motorized Rolls adjustment motorized Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Machine in Good Condition Undercurrent Demonstratable .