Stil Pekarna D.o.o.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012090, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: silver, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable Ljdpfezggicox Al Noac ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control system; Thermal sensors for maximum precision; Y-axis; Subspindle with collet chuck; Spindle bore 80 mm (main spindle); All axes with box ways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders included; Robot loading by Halter available upon request! Photo attached. An automatic door can be retrofitted for this purpose. Lasdpfezggh Sjx Al Nec In Germany, complete commissioning upon request. All at additional cost!

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: R-00623, load capacity: 25 kg, arm reach: 1,853 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iB/25 manufactured in 2019.07. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iB/25 Model Number: A05B-1226-B201 Year of Manufacture Robot: 2019.07 Warranty term (months): 12   Payload (kg): 25 Lajdpfx Alezgghre Nec Reach (mm): 1853  Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Installation Type: Floor, upside-down, and angle mounting Weight (kg): 210   Controller: R-30iB Plus Year of Manufacture Cabinet: 2019.06 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Lodszgghfepfx Al Njac Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Lajdpfx Aezggg Uel Njc Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: used, mileage: 555,412 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, retarder, soot filter, spoiler, = Additional Options and Accessories = Lajdpfjzggg Iex Al Nec - Roof spoiler - Hydraulic tipping kit - Aluminum fuel tank - Alloy wheels - Engine brake - Particle filter - Headlights - Side sills - Standard air conditioning - Sun visor - Alternating current - Toolbox = Further Information = Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Alloy rims; Steered; Tire tread depth left: 2 mm; Tire tread depth right: 2 mm; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80 R22.5; Double tires; Alloy rims; Tire tread depth left inner: 4 mm; Tire tread depth left outer: 4 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 4 mm; Suspension: Air suspension Unladen weight: 7,770 kg Payload: 11,230 kg GVW: 19,000 kg Damage: None

Condition: used, mileage: 274,213 km, power: 120 kW (163.15 HP), first registration: 03/2011, fuel type: diesel, tire size: 195/75R16C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2011, Equipment: ABS, central locking, electric window regulation, power mirror, = Additional options and accessories = - Stability control = Further information = Tire size: 195/75R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Rear axle: Dual tires; Tire tread depth left (inside): 8 mm; Tire tread depth left (outside): 8 mm; Tire tread depth right (inside): 8 mm; Tire tread depth right (outside): 8 mm Lodpfxjzgggzo Al Neac Unladen weight: 1,930 kg Payload: 1,570 kg GVWR: 3,500 kg Damage: none

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved! Ledpozgggusfx Al Njac

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,127 h, pressing force: 138 t, stroke length: 200 mm, total width: 1,750 mm, total height: 2,550 mm, overall weight: 10,200 kg, controller manufacturer: DELEM, controller model: DA-66T CNC, product length (max.): 3,640 mm, number of axes: 6, This 6-axis Other PRCN Synchro 30135 was manufactured in 2013. It features a press force of 1350 kN and a bending length of 3100 mm. The machine is equipped with a powerful 11 kW motor and offers advanced CNC controlled bending aid systems. If you are looking to get high-quality bending capabilities, consider the Other PRCN Synchro 30135 press brake we have for sale. Contact us for further details. • Distance Between Side Frames: 2600 mm • Motor Power: 11 kW • Open Height: 400 mm • Throat Depth: 400 mm • Approach Speed: 200 mm/s • Working Speed: 0–10 mm/s • Return Speed: 150 mm/s • X-Axis Speed: 500 mm/s • X-Axis Positioning Accuracy: ±0.05 mm • R-Axis Travel: 150 mm • R-Axis Speed: 170 mm/s • R-Axis Positioning Accuracy: ±0.20 mm • R-Axis Repeatability: ±0.20 mm • Z1-Z2 Travel Range: approx. 2500 mm • Z1-Z2 Speed: 2000 mm/s • Z1-Z2 Positioning Accuracy: ±0.10 mm • Z1-Z2 Repeatability: ±0.10 mm • Laser Safety System: Fiessler AKAS LC-II F • Hydraulic System: Hoerbiger • Product and Tool Memory: 64 MB • Interfaces: 2 × USB, RS232C, Network Interface, PLC Interface • Independent Z1-Z2 Finger Positioning: Yes • Free-Moving Right Backgauge Finger: Yes • Right Finger Travel Range: 200 mm • Relative Right Finger Adjustment: +100 mm / -100 mm • Pneumatic Sheet Support Arms with Ball Rollers: Yes • CNC Controlled Bending Aid System: ACF1 • Number of Motorized Bending Aids: 2 • Bending Aid Load Capacity: approx. 150 kg per unit • Bending Aid Support Range: approx. 900–1500 mm • Bending Aid Width per Arm: approx. 350 mm • Bending Aid Height Adjustment: ±60 mm • Bending Aid Depth Adjustment: 0–60 mm • Bending Aid Accuracy: ±0.2 mm Lsdpfezgggnox Al Noac • Support Arm Working Area: 500 mm • Maximum Box Height with Raised Tooling System: up to 240 mm • Tool Clamping: Pneumatic Upper Clamping • Operating Hours: approx. 11,270 h Technical Specification Bending Length 3100 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights Laodpfx Aezggghsl Nec * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, Year of construction: 2006, operating hours: 59,800 h, machine/vehicle number: IntNr231615, A compact, high-precision horizontal CNC bar feed milling machine is for sale: ALMAC FB 1005 CNC, manufactured in 2006, equipped with a FANUC 16i-MB / 161MB control system. Technical data: Manufacturer: ALMAC / Tornos Type: FB 1005 CNC Year of manufacture: 2006 Control system: FANUC 16i-MB / 161MB Axes: 6 axes Travel ranges X / Y / Z: 280 / 230 / 120 mm Working feed rate X / Y / Z: Rapid traverse: 12 m/min Resolution: 0.001 mm Front spindle block: with spindles Side spindle block: 4 spindles Vertical spindle block: 4 spindles Parting spindle: 1 spindle Rear machining: 2 or 3 spindles Standard spindle: Speed: 1,000–12,000 rpm Power: 1.4 / 3.4 kW Parting spindle: Speed: 100–3,000 rpm Power: 1.4 / 3.4 kW Tool holder: ESX 20 / HSK 32-A Indexing table / C-axis: Bar feed: Pneumatic: 25 mm or CNC W-axis: 50 mm Swiveling / B-axis: Manual: 0–20° Lasdpfxezgggbs Al Nsc or CNC B-axis: 0–20° or -5° to +45° for short bars Coolant system: Coolant tank: 205 l Flow rate: 40 l/min Standard filtration: 35 µm / 28 µm Temperature control: 3,000 W for ΔT 3 °C Connection data: Installed power: 10 kVA Voltage: 3 × 400 V / 50 Hz Compressed air: 6 bar Dimensions with bar support: L × W × H: 1,800 × 4,250 × 2,060 mm Weight: approx. 1,800 kg The machine can be inspected in operation by prior arrangement. Subject to changes, errors and prior sale.

Condition: used, machine/vehicle number: 725939, functionality: unexamined, input voltage: 220 V, Edge banding machine for sale. Suitable for DIY enthusiasts and hobby woodworkers. Ljdpfx Aszggf Rsl Noac

Condition: used, mileage: 226,300 km, power: 162 kW (220.26 HP), first registration: 09/2013, fuel type: diesel, empty load weight: 5,640 kg, maximum load weight: 1,850 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space volume: 37 m³, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 2,470 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, tail-lift, trailer coupling, MAN TGL 8.220 4X2 BL box van First registered: 9/2013 226,300 km with documentation Euro 5 Long-distance cab with 6 seats / 2 beds Automatic transmission Air conditioning, auxiliary heater Trailer coupling Rear view camera Tail lift 1,000 kg Rear axle with air suspension Wheelbase 5100 mm Tires 235/75 R17.5, tread approx. 60% Box dimensions: 6200 mm x 2450 mm x 2470 mm Permissible total weight 8,800 kg (derated to 7,490 kg) Unladen weight 5,640 kg Payload 3,160 kg (derated to 1,850 kg) German vehicle, first owner, in good condition. Valid TÜV (technical inspection) until November 2026. Ledpfjzggf Dsx Al Nsac Export/net price: 16,900 Euros All information without guarantee, errors and omissions excepted.

Condition: excellent (used), Year of construction: 2018, operating hours: 296 h, fuel type: electric, Year of manufacture: 2018 Drive: Wheel GVW: 7.466 kg Mast: articulated arm Lifting capacity: 227 kg Working height: 2.020 cm CE mark: yes Technical condition: very good Visual appearance: very good Genie Z-60/37 DC – Year 2018 | Only 296 Operating Hours | Valid Inspection For sale: a well-maintained Genie Z-60/37 DC from 2018 with only 296 operating hours. This fully electric articulating boom lift is ideal for applications requiring quiet, emission-free and efficient operation, both indoors and outdoors on firm surfaces. Laedpfszggfwsx Al Nec With a working height of approximately 20 metres (66 ft) and a horizontal outreach of approximately 11 metres (36 ft), this machine delivers excellent performance for a wide range of access applications. The electric drive system ensures low operating costs, reduced maintenance requirements and environmentally friendly operation. The machine is in excellent condition, has exceptionally low operating hours and comes with a valid inspection certificate. Ready for immediate use. Key Features: Year: 2018 Only 296 operating hours Valid inspection Working height: approx. 20 m Horizontal outreach: approx. 11 m Fully electric drive system Quiet and zero-emission operation Excellent condition Ready for immediate deployment An excellent opportunity to acquire a fully electric Genie boom lift with exceptionally low operating hours. Contact us for more information or to arrange a viewing.

Condition: used, Year of construction: 2012, operating hours: 37,500 h, machine/vehicle number: IntNr231616, Lodpfjzggfqex Al Neac

Condition: used, mileage: 798,990 km, power: 353 kW (479.95 HP), first registration: 05/2004, fuel type: diesel, tire size: 385/65R22.5, tire condition: 60 %, axle configuration: 8x4, wheelbase: 5,700 mm, fuel: diesel, fuel tank capacity: 350 l, color: red, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: parabolic leaf (spring), total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = - PTO - Radio/CD Lodozggfkjpfx Al Nsac = Further Information = General Information Cab: Day Cab Technical Information Number of Cylinders: 6 Axle Configuration Tire Size: 385/65R22.5 Suspension: Parabolic Suspension Front Axle: Tire Tread: 60%; Reduction: single reduction Rear Axle 1: Tire Tread: 70%; Reduction: single reduction Rear Axle 2: Tire Tread: 40%; Reduction: single reduction Rear Axle 3: Tire Tread: 90%; Reduction: single reduction Weights Unladen Weight: 12,540 kg Payload: 24,460 kg GVW: 37,000 kg Functional Body Brand: Hydraulic Transport Systems Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and meet the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: ready for operation (used), chuck outer diameter: 1,050 mm, turning diameter: 1,050 mm, rotational speed (max.): 117 rpm, Model: 36 EM Table Dia: 42” (Oversized) Max Swing: 42” Laedszggfdspfx Al Nsc Table Speeds: To 117 RPM

Condition: used, Year of construction: 2012, operating hours: 53,154 h, functionality: fully functional, pressing force: 120 t, filling opening width: 1,800 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 730 mm, total width: 4,700 mm, total height: 4,600 mm, total length: 13,100 mm, overall weight: 28,000 kg, warranty duration: 12 months, Equipment: documentation/manual, For sale is a bale press, model "EP 1000 V5 H3," manufactured in 2012, featuring both horizontal and vertical tying mechanisms. Lajdpfezggd Tsx Al Noc The pictures show the machine in its assembled state. It is currently located at our facility in Lathen. The press is sold without a conveyor belt. Prior to delivery, the machine will be completely overhauled and technically refurbished by our qualified technicians. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-related components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and fasteners • Inspection of electrical components and safety devices • Inspection and readjustment of the tying mechanism • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Through this comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2017, – 2 speeds – Double miter – Saw pressure hydraulically adjustable – Quick clamping device – Cooling – Automatic shut-off – Emergency stop Laodpfx Aozggd Hel Noc – 400V

Condition: used, Year of construction: 2022, machine/vehicle number: 71.0363, j.stumpf [at] ivg.auction CNC turning machine with 12-position turret Travel paths / working area • X-axis: 370 mm • Z-axis (without Y-axis): 260 mm Feeds • Speeds: continuously adjustable • Rapid traverse X: max. 45 m/min (370 mm) • Feed forces X: 3450 N • Rapid traverse Z: max. 45 m/min • Feed forces Z: 4600 N Laodpfezggdyjx Al Nec Main spindle • Spindle speed: depends on spindle type, up to max. 8000 1/min • Drive power: 12 kW S1 • Bar capacity: 26 mm Clamping device • Chuck: 80 - 160 mm • Short taper DIN 55026: Form A, size 4 Turret • Type: Disc turret • Manufacturer: SAUTER • Number of tools: 12 • Tool holder: Tool holder with cylindrical shank according to DIN 69880 VDI 25 • Drive power: 2 kW S1 up to n 6000 1/min, up to 6 kW S3 40 % duty cycle up to n 6000 1/min • Max. tool length: From turret face to tool front edge 140 mm Technical data • Machine dimensions (width x depth x height): approx. 2309 x 1689 x 2014 mm • Weight approx.: 4500 kg

Condition: good (used), functionality: fully functional, mileage: 92,975 km, power: 137 kW (186.27 HP), first registration: 07/2023, fuel type: diesel, empty load weight: 5,060 kg, maximum load weight: 2,430 kg, overall weight: 7,490 kg, tire size: 215/75 R 17.5, axle configuration: 4x2, wheelbase: 4,185 mm, next inspection (TÜV): 09/2026, fuel: diesel, fuel tank capacity: 120 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 35 m³, loading space length: 6,090 mm, loading space width: 2,485 mm, loading space height: 2,370 mm, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, central locking, cruise control, electric window regulation, hill-start assist, lane keeping assist, onboard computer, power mirror, soot filter, spoiler, tachograph, tail-lift, traction control, truck registration, our vehicle number #30845 Urban transport vehicle Euro VI Lajdpfxjzggdts Al Nsc 186 hp 4x2 Wheelbase 4,185 mm Engine brake Tire size 215/75 R 17.5 Permissible total weight 7,490 kg Payload 2,490 kg Unladen weight 5,000 kg Body dimensions (approx.): L: 6,090 mm W: 2,485 mm H: 2,370 mm V: 35 m³ Tank capacity 120 liters Color: white Transmission: automatic Air conditioning Tail lift Dautel with roll-off protection (1,000 kg) Disc brake Cruise control Traction control Roof spoiler Rear view camera Driver's suspension seat Double bench seat on the right Radio/USB/Bluetooth Electric windows, 2-way Electric exterior mirrors/heated On-board computer LDW lane departure warning system Hill start assist 2 rows of anchor rails 6 pairs of lashing eyes Preparation for trailer hitch Central locking with remote control LED daytime running lights Spier box, year of manufacture 2023 Through-loading height 2,330 mm and width 2,375 mm Financing available upon request!!!

Condition: used, functionality: limited functionality, input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, saw blade bore: 30 mm, Miter saw by Graule with a carriage for mobile use. Hardly used. In good condition, complete with dust bag. Lasdjzggdgepfx Al Njc

Year of construction: 2026, condition: new, functionality: fully functional, New vertical pressure leaf filter body Manufacturer: Juneng Model: NYB-20 Filter Area: 20 m² Cake Volume: approx. 400 L Capacity: approx. 4–6 t/h for crude / vegetable oil Working Pressure: 0.1–0.4 MPa, max. 0.5 MPa Shell Temperature: ≤150 °C Machine Volume: approx. 1,680 L Weight: approx. 1,700 kg Shell Diameter: approx. 1,100 mm Plate Spacing: 70 mm Inlet / Outlet: DN50 inlet/outlet, DN40 overflow, approx. DN400 discharge Material: carbon steel as standard Stainless steel version available on request at additional cost Important note: This offer is for the filter body only. PLC automation, automatic valve skid and installation are not included. Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – suitable for crude oil clarification and fine filtration Low maintenance – long service life of filter plates Simple cake discharge – vibration / discharge system depending on configuration Can be steam jacketed – optional heating for waxy oils Filter aid compatible – suitable for bleaching earth, activated carbon or diatomaceous earth Compact vertical design – high filtration area with limited floor space Typical Applications: Crude vegetable oil clarification after settling Bleaching earth filtration after bleaching tank Post-degumming or post-neutralization polishing Filtration of rapeseed oil, sunflower oil, soybean oil and other vegetable oils Technical oil, biodiesel and oleochemical filtration Food, biodiesel and cosmetic-grade oil prefiltration Suitable for oil mills, edible oil processing plants, biodiesel producers, oleochemical plants and industrial liquid-solid separation applications. Neuer vertikaler Druckblattfilter / Pressure Leaf Filter Hersteller: Juneng Modell: NYB-20 Filterfläche: 20 m² Filterkuchenvolumen: ca. 400 L Kapazität: ca. 4–6 t/h für Rohöl / Pflanzenöl Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa Arbeitstemperatur: ≤150 °C Behältervolumen: ca. 1.680 L Gewicht: ca. 1.700 kg Behälterdurchmesser: ca. 1.100 mm Plattenabstand: 70 mm Ein-/Auslauf: DN50 Ein-/Auslauf, DN40 Überlauf, ca. DN400 Austrag Material: Standardausführung in Kohlenstoffstahl Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Wichtiger Hinweis: Angeboten wird nur der Filterkörper. PLC-Automatisierung, automatischer Ventilstand und Installation sind nicht im Lieferumfang enthalten. Hauptmerkmale: Hermetisch geschlossene vertikale Bauweise – kein Auslaufen und geringe Geruchsemission Hohe Filtrationsgenauigkeit – geeignet für Rohölklärung und Feinfiltration Geringer Wartungsaufwand – lange Lebensdauer der Filterplatten Einfache Kuchenentleerung – Vibrations-/Austragssystem je nach Ausführung Optional beheizbar / dampfbeheizbar – geeignet für wachshaltige Öle Kompatibel mit Filterhilfsmitteln – geeignet für Bleicherde, Aktivkohle oder Kieselgur Kompakte vertikale Bauweise – große Filterfläche bei geringem Platzbedarf Typische Anwendungen: Klärung von rohem Pflanzenöl nach der Sedimentation Bleicherdefiltration nach dem Bleicher Polierfiltration nach Entschleimung oder Neutralisation Filtration von Rapsöl, Sonnenblumenöl, Sojaöl und anderen Pflanzenölen Lodpfozggc Nsx Al Njac Technische Öle, Biodiesel und oleochemische Anwendungen Vorfiltration für Lebensmittel-, Biodiesel- und kosmetische Ölqualität Geeignet für Ölmühlen, Speiseölverarbeitung, Biodieselhersteller, oleochemische Anlagen und industrielle Fest-Flüssig-Trennung.

Condition: used, mileage: 699,300 km, power: 355 kW (482.67 HP), first registration: 09/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,275 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2019, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, second fuel tank, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio Lsdpfx Alezggdao Njac - Roof spoiler - Differential lock - Remote central locking - Windshield - Enclosed cab - Speed limiter - Cab - Refrigerator/cooling drawer - Air suspension - Parabolic spring suspension - Particle filter - Radio/CD player - Radio/cassette player - Disc brakes - Sleeper cab - Hose assemblies - Side skirts - Seat heating - Sun visor - Voice control - Stability control - Automatic heating system - Toolbox - Central lubrication system - Equipment transfer = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission: 12T2210, automatic Maximum front axle load: 8000 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 8,230 kg Payload: 11,270 kg GVW: 19,500 kg Maintenance APK (Periodic Technical Inspection): valid until 11.2026 Identification License plate: 78-BTP-7

Condition: used, mileage: 74,000 km, power: 79 kW (107.41 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,972 mm, total width: 2,032 mm, total height: 1,964 mm, loading space length: 2,480 mm, loading space height: 1,380 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Ford Transit Custom 300 Trend, L1H1, with optimal equipment, ideal for businesses and tradespeople. From first owner. Workshop/shelving system by Würth (details below). Heated seats, adjustable on both sides Air conditioning with pollen filter 3 seats (double passenger seat) Comfortable driver's seat with fold-out armrest, multiple adjustment options: - Seat height, seat tilt, backrest, lumbar support Seat cover fabric High cargo area partition, lined, with window and pass-through Audio-navigation system 24/25 with Ford SYNC 3, 8'' color touchscreen - AppLink (Android Auto and Apple CarPlay) - Media: Radio (DAB+, FM), USB, Bluetooth - Bluetooth hands-free system - Voice control Multi-function leather steering wheel Driver assistance systems: - PDC parking pilot system front and rear, visual and audible display - Cruise control - Hill start assist - ABS, ASR, ESP - EDS electronic front differential lock Comfort: - Electric windows - Electrically adjustable and heated exterior mirrors - Central locking with remote control Multi-function display / on-board computer Driver and passenger airbags Spare wheel with road tires Fog lights with cornering lights Daytime running lights LED Trend version Laedpszggc Aefx Al Nsc Model update Style color package - Front bumper, rear side panels and exterior mirrors painted in vehicle color Color FROZEN WHITE 6-speed manual transmission Wheelbase 2933 mm Rear tailgate with glazing, heated, windshield wipers, opening angle 180 degrees Sliding door, cargo area, right Registered as an NCV (commercial vehicle) van Steering wheel adjustable Cargo area equipment: Workshop installation by Würth (similar to Aluca, Bott, Sortimo). Shelving system on both sides with shelf compartments, storage compartments, drawers (6x), holders for tool/small parts cases (4x - cases not included). Extendable workbench. Cargo area partition, lined in the cab (noise-insulated), with window. Robust, plastic-coated wooden floor. Load securing through eyelets and fastening rails. Walls lined with plastic panels. Lighting. Ventilation and air conditioning. Cargo area dimensions (approximate): - Length: - Bottom: 248 cm, with pass-through: 310 cm - Middle: 237 cm - Top: 232 cm - Height: 138 cm (under cross member) Tires: All-season tires 215/65 R 15 on steel rims with wheel covers, approximately 4 mm tread depth in the front and approximately 6 mm in the rear Service history: 03.2024 / 52,766 km Inspection (annual check) 09.2025 / 69,220 km Inspection + engine oil change + brake fluid + air filter + odor filter Next service due at 109,000 km or 09.2027 Data transmission errors may occur in the vehicle description, including images. Errors and prior sale are reserved.