Used Genius for sale (114)

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Guodjwg Sgcepfx Ag Njh Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: excellent (used), Year of construction: 2001, spindle bore: 20 mm, Machine in perfect condition. Gusdpfx Agju Ivw Ts Njh Can be inspected during production any time

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Gjdewg R Rtjpfx Ag Nouh

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Guodowg Sd Uspfx Ag Njh Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Note: The machine will be available from 02/12/2025! Gusdpfjxdkxisx Ag Neh

Condition: like new (used), Year of construction: 2017, operating hours: 40 h, functionality: fully functional, machine/vehicle number: 1000018153, total width: 3,145 mm, total length: 4,250 mm, total height: 900 mm, overall weight: 2,000 kg, input current: 17 A, warranty duration: 3 months, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,710 mm, feed length Y-axis: 2,600 mm, feed length Z-axis: 40 mm, pressure: 7 bar, machine base height: 900 mm, cutting length (max.): 3,710 mm, Intermac cutting table RS-A, glass cutting thichness from 2 to 19mm. Max size 3710 x 2600mm. Table include: air cushion 3 breakout bars tilting arms for loading/unloading glass Shape scanner. Include optimazer software PerfectCut and Icam drawing cad. Gusdpfx Ajxlu Tgjg Neh It has all the original documentation and original transport brackets. Machinery Installed in 2017, never been used, 34 operating hours. It is in a like new condition. We can offer installation and training.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 7,889 h, machine/vehicle number: V1.01.03.01, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Prima Industrie Group, controller model: Prima Electro, laser type: fiber laser, laser source manufacturer: Lumibird, laser hours: 6,211 h, laser power: 4,000 W, laser wavelength: 1 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, working length: 3,150 mm, working width: 1,500 mm, working height: 150 mm, feed rate Y-axis: 130 m/min, feed rate Z-axis: 130 m/min, cutting speed: 130 mm/min, positioning speed: 180 m/min, repeat accuracy: 0.03 mm, power: 42 kW (57.10 HP), input voltage: 400 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 6 bar, total length: 12,300 mm, total width: 3,400 mm, total height: 2,730 mm, warranty duration: 3 months, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser Genius+ is the latest addition to the Prima Power 2D family. It is a highly productive and flexible fiber laser machine with a reversible layout that can fit any customer’s workshop without compromising configuration, making Laser Genius+ suitable for all customer environments and types of production. Gjdpfexhhptjx Ag Njuh Its key features include a gantry structure, a broad range of automation solutions, and improved cutting quality further enhanced by adaptive optics for automatic management of focal position. All of Laser Genius+'s most significant components, such as the CNC, laser generator, and mechanical structure, are designed and developed by the Prima Industrie Group, ensuring total control of the laser process and top-class reliability.

Condition: used, New: No Empty weight: 2 kg Part suitable for: trucks Type number: GP-24-1000 Gusdpfx Agexhrume Nsh Genius Power GP-24-1000 Occ omvormer Genius Power GP-24-1000 OEM : GP-24-1000 Article nr.: V154999003-veiling Used Inverter Genius Power GP-24-1000

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, total height: 2,530 mm, total width: 1,213 mm, total length: 2,326 mm, ZK Genius 700 Magic 3 Year of manufacture: 2016 6000 eroding hours Travel paths (X/Y/Z): 400 x 350 x 350 mm Table dimensions: 575 x 500 mm Max. workpiece weight: 700 kg Distance table to chuck: 200–550 mm Dielectric fluid level: up to 420 mm above table Guodpfxjxlz Nne Ag Neh Including 24-position electrode changer Max. electrode weight with rotation: 15 kg Machine dimensions: 1213 x 2326 x 2530 mm Total weight: 3200 kg The machine is still in operation at our customer’s site and can be inspected under power.

Condition: used, Year of construction: 2015, Second hand INTERMAC COMBI LINE composed of: * Automatic Jumbo cutting table, type Genius 61CT, Year 2015 * Laminated glass cutting table, type Genius 37LM, Year 2013 Guodpfx Agsxfg U As Noh

Condition: used, Year of construction: 2002, Diesinking / EDM Godpfxjvtfn Io Ag Neuh Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 315 mm table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis quill chuck: EROWA

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1000007391, total width: 3,145 mm, total length: 4,250 mm, total height: 900 mm, overall weight: 2,010 kg, input current: 17 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,800 mm, feed length Y-axis: 2,650 mm, feed length Z-axis: 40 mm, compressed air connection: 8 bar, Float cutting table for DLF size, shapes, scan, (mirror cut for laminated glass). Workable thickness 3-19mm. Max cutting speed 150 m/min. Loading arms, 2+1 break-off bars. Installed power: 6.5 kW. Guodpfowlb D Iox Ag Noh

Condition: used, • Model – Genius 37 CT-S • Year of manufacture – 2007, serial number: 86592 • Max. glass size: 3300 x 2550 mm • Glass thickness: 3 – 19 mm • Can also cut shapes, offcut optimization, data input at the cutting table • With breaking bars and strong air cushions • Table can also tilt • Working height: 900 mm • Weight: 2600 kg Gusdpewz U Hbjfx Ag Noh

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Laser with 8kw and chiller Open Cabin with right and left side accessible doors Safety glasses on the doors NIGHT Cut for safer cutting and piercing process SMART Cut for faster processing of thin material MAX Cut for piercing process time reduction for thick material Gas Mixer Cut Nozzle check and OPC by camera Adaptive cut Gjdpfx Aexb E Rbjg Nouh ATC automatic tip changer with 20 nozzle stations This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2000, A Homag CNC 3-axis woodworking center is available. Travel X/Y/Z: 4800mm/1200mm/410mm, rapid traverse X/Y/Z: 80m/80m/30m/min, main spindle power: 12kW, tool places: 17, including 9 carriages, separate control cabinet, Gedore workshop trolley with some spare parts, Siemens vacuum pump and Gardner Denver vacuum pump. Documentation available. On-site inspection is possible. Gujdpfx Agjwa A T Ts Njh

Condition: excellent (used), Year of construction: 2017, Cutting width: 3700 mm Working height: 860 mm Machinable thickness of laminated glass (mm) 3+3/1-8+8/12 (10+10/4 OPT) 3-12 Width: 3420 mm Depth: 4100 mm (table) + overhang of cutting bridge, left 550 mm, right 380 mm Height: 1520 mm to top edge of cutting bridge Gjdpewtpbqefx Ag Neuh

Condition: ready for operation (used), machine/vehicle number: K0713163, Condition Used This listing is for a Kendall Genius 2 Checker/Calibrator Gsdpfx Agotqkh Ej Nouh The Genius™ Checker Calibrator checks the accuracy of the Genius™ tympanic thermometer and automatically recalibrates the thermometer, if necessary. In addition, the checker calibrator has the capability to generate a test report for each thermometer tested and save it to a USB flash drive. It works with all Genius™ thermometer software revisions. The Genius™ checker and calibrator contains two independently controlled infrared calibration targets that are similar to factory calibration targets. These “blackbody” targets are designed to have efficient radiative heat transfer and produce infrared radiation that approximates the human ear at temperatures of 32.2°C (90.0°F ) and 40.6°C (105.0°F).

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5000-L-G555B-L-G555B, Optical separator Best configured to work on optical separation of plastics and electronic board. It perfectly copes with the separation of colors of fractions of the flake size range 15-34 mm dtr documentation serviced by authorized service Machine working possible tests on site Gedpfx Agsry T E Re Nsuh capacity for electronic board 300 kg / h

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works Godowv U N Sspfx Ag Neuh On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: good (used), Year of construction: 2005, operating hours: 527 h, functionality: fully functional, machine/vehicle number: 05-9473, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 60 mm, total height: 2,000 mm, total length: 1,600 mm, total width: 3,800 mm, rotational speed (max.): 12,000 rpm, input voltage: 400 V, The machine in question is a grinding and drilling center (manufacturer designation: stone cutting machine). The machine is designed as a vertical machining center in a gantry design. The frame consists of a welded steel tube construction. The drilling head is mounted vertically. There is no angular adjustment possible on any axis for the drilling head. Tools with horizontal shafts can be attached via an existing angle grinder attachment. The tool can be moved linearly along 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and does not move. The machine is used for: - Creating cutouts and round edge profiles - Making drip edges or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs The machine is also equipped with: - an angle grinder attachment - a compressed air connection (for generating vacuum for clamping fixtures and for cleaning the drill spindle) - a water connection (for cooling tools and workpieces during machining) Machine Data: Gusdpow Upzfsfx Ag Noh Manufacturer: Martin Kolb Maschinenbau - Model: Genius 2500 - Serial Number: 05-9473 - Year of Manufacture: 2005 - Max. working area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Main drive power: 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread - Max. drilling diameter: up to 100 mm Various accessories such as milling cutters and other tool holders are also included.

Year of construction: 2019, condition: ready for operation (used), An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible. Guodpjwdwztjfx Ag Nsh

Condition: used, Year of construction: 2019, System for split dimensions. Can cut shapes and models. Laser scanner, breaking bars, tiltable table. Gujdpewvabtsfx Ag Neh Working height: 900 mm. Height from floor to upper edge of cutting bridge: 1450 mm. Length: 4450 mm. Width: 2950 mm. Height: 900 mm. Condition: very good.

Condition: ready for operation (used), Year of construction: 2015, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l Autom. ON/OFF with level alarm Oil temperature sensor Transport pipes Gjdew Ewpgopfx Ag Neuh Used machine in good condition

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Gedpfxjqvnl Te Ag Nsuh

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4,1 kW Gjdpfx Asvptrtog Nouh Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l New exhibition machine with 5 operating hours