Werner Michalski

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Ijdpfxezu Tf Te Ah Dotk

Condition: used, 10 pieces of carbide cutting inserts, HM cutting inserts, indexable inserts WIDIA Cutting insert with chip guide and cylindrical bore Type DNMM 150 612 TK15 Nominal size: 15 mm Cutting radius: 1.2 mm Rhombus angle: 55° Insert thickness: 6.35 mm Dimensions according to the sketch: D = 12.7 mm L10 = 15.5 mm = edge length of the rhombus S = 6.35 mm = insert thickness R = 1.2 mm = cutting radius D1 = 5.16 mm = cylindrical clamping bore Itodpfx Aezugqpoh Dok 10 pieces = 2 packaging units, each with 5 inserts There are 160 packaging units available. The price quoted refers to 2 packaging units.

Condition: used, TECHNICAL DETAILS - Bar diameter : 23 [mm] - Bar length : 3200 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4080 x 1200 [mm] - Machine height : 1750 [mm] - Machine weight : 830 [kg] EQUIPMENT - Channel diameter : 24 [mm] - Pushcart diameter : 23 [mm] Itsdpfjzr Rutjx Ah Dsk

Year of construction: 2003, operating hours: 18,000 h, condition: used, functionality: fully functional, Bar feeder with automatic bar feeding system for bars with a diameter of 3 to 32 mm. It was functioning perfectly until it was replaced with a newer model. Iodpfxezrw Duj Ah Djtk It is not possible to see it in operation because it is not connected to the CNC machine. For information on troubleshooting and maintenance, please contact Italmatic, which is the product’s representative in Spain.

Condition: used, Bar pointing/chamfering machine PAREX Isdpozrp D Tsfx Ah Dstk

Condition: used, 2 clamping plates for KK 8, ribbed cast iron plate, diameter 800 mm and 780 mm Itedpfx Ajzq Dlvsh Dsk

Condition: used, Year of construction: 1998, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate available AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Frame B112FU IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature: 0-40°C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. Isdszq Atljpfx Ah Djtk All technical data subject to typographical errors and errors. Sale exclusively to countries within the EU.

Condition: used, Rotating chuck collet holder for pressure collets Collet chuck, collet holder Chuck flange: short taper DIN 55027 size 5 (with 4 tightening bolts M10), taper bore approx. Ø 82 mm Pressure collet type: F 48 / 173E DIN 6343 Large taper diameter: Ø 60 mm Small taper diameter: Ø 48 mm Collet taper: 30° Collet length: 94 mm - 2 pressure collets: 1x Ø 20 mm round collet, 1x 30 mm hexagonal collet Weight: 11.5 kg Good condition Iedpfx Ahezqgl Eo Djtk

Year of construction: 1999, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Itedpjzqgiwefx Ah Djk Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 1999, condition: used, manufacture IEMCA weight 1.400 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Itjdpfx Aezqgiqsh Dek

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Itodezqgikepfx Ah Dek Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 1997, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Itsdpfx Ahezqgh Tj Dek Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Offering a bezel for a Boehringer DUS 560 ti. The machine was involved in an accident, but the bezel has seen very little use. The bezel is undamaged. Itsdpfxjzp Hzko Ah Dek

Condition: used, weight / kg taper MK / Itedszmy Swepfx Ah Dok

Condition: used, Forkardt 2-Jaw Chuck 1629034, Double-Jaw Chuck, Ø 160mm Index G200 Adapter, Ø140mm ZWS140-K5 Index G200 Used, as shown in the pictures, in excellent condition Isdpfjzk Iy Rjx Ah Dstk From warehouse stock (may have storage marks) Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment.

Condition: good (used), functionality: fully functional, 3 inserts for Multifix, size C, Iedpfx Ahozkypqo Detk

Condition: used, TECHNICAL DETAILS - Bar diameter : 8 - 80 [mm] - Bar length : 3300 [mm] POWER SUPPLY - Supply voltage : 230 / 400 [V] Iodpfx Aozkmdujh Dstk

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, Used Spinner Robobox, used to automate the loading and unloading of Spinner lathes with plastic components. Fanuc M10iD 6-axis robot, 1420 mm reach, 12 kg gripper unit. Barely used. Dual gripper, 5 drawers 800 x 600 mm (3 x 150 mm, 2 x 200 mm height). Ijdpfx Aezi Elhjh Dotk Safety scanner. Note: Hard drive needs to be replaced.

Condition: used, 4-Jaw indexing chuck AROWA TYPE Ø 380 NO. 11 Diameter: 380 mm Isdpfozin Apsx Ah Detk Inner diameter: 135 mm Chuck mount: Short taper, size 8, DIN 55027 with 4 mounting bolts M16 Taper mount: Ø 139 mm - Indexing chuck with centrally adjustable jaws - 1 set of jaws with inward steps Weight: 84 kg Good condition

Condition: good (used), Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm -Dimensions: see photos Iodpfezhl Dbjx Ah Djtk -Dimensions: Ø 125 x 125 mm -Weight: 5.7 kg

Condition: good (used), Tool trolley with inserts Itsdpezhi Tmjfx Ah Dok with turning holder for NC lathe, Shaft: 50 mm

Condition: like new (used), 3 face plates, cast iron. Each with an outer diameter of 500 mm. Itsdezg Tf Depfx Ah Dsk 1 unit with through-hole = 128 mm 1 unit with through-hole = 90 mm 1 unit with through-hole = 80 mm.

Condition: like new (used), 3 unused clamping elements Dimensions, W x D approx.: 100 x 150 mm Total height: 91.5 mm Jaw width: 30 mm Isdpfezfn Hmsx Ah Dotk Lowest support height on jaws: 68.5 mm Medium support height: 80 mm Clamping height per jaw approx.: 11.5 mm

Condition: used, Collets in special size – suitable for Weiler 260 and Leinen 140 – package price: EUR 250 net Itsdpfx Aszd Uq Neh Dek

Condition: ready for operation (used), For sale: chucks from well-known manufacturers. VDI50 DIN1809 shank (fin type). The price listed is per unit. All details are shown in the pictures. Shipping costs will be calculated separately, depending on the number of chucks ordered. Please feel free to contact us. Isdpszd Rpzofx Ah Dstk