Used Ehlers for sale (134)

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: M08E/9148, Offer Number: M08E/9148 Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Type: GB200 Constr. year: Ü 2025 diameter range: 8-20mm number of dies: 4 number of stations (incl. cut off): 5 output - pieces/min: 50 shaft length under head: 200 mm cutting length: 225 mm Gsdpfxjyzzc Aj An Ijug Location: Europe

Condition: used, Year of construction: 2017, Control DMG MORI SLIMline x-travel 500 mm y-travel 450 mm z-travel 400 mm b-axis -5 / + 110 ° Guodpfxszz S Ruj An Isg 360 ° table dimensions 630 x 500 mm rapid traverse 30 m/min turning speed range 20 - 12.000 U/min Drive power (40/100%) 13/9 kW tool taper SK 40 number of tool places 30 Pos. Number of working hours ca. 11.605 h spindle hours ca. 4.061 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Internal coolant supply (ICS) - Coolant spray gun - Electronic handwheel - Direct position measuring system (X, Y, Z) - Renishaw probe kit - Oil and emulsion mist separator Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Godjt Nhmhjpfx An Ieug

Condition: used, Year of construction: 2003, turning diameter 175 mm control Fanuc spindle tunring speed 6.000 U/min number of tool places 12 Pos. x-travel 125 mm z-travel 120 mm Guedpfxszz S Rze An Ieg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 Gedezz S N Repfx An Ioug turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Gujdozz S R Ispfx An Isg

Condition: used, Year of construction: 2023, control SIEMENS SINUMERIK 828D greates pass round over bed 650 mm swing diameter over slide rest 540 mm max. turning diameter 395 mm bar material dia. 67 mm x-axis 235 mm Gsdpfx Anozzrhyj Ioug y-axis 105(±52.5) mm z-axis 580 mm Feed ( x / y / z) 24/10/24 mm/min spindle tunring speed 4.500 U/min torque 169,8/89,2 Nm spindle nose A2-6 spindle passage 76 mm spindle bearing diameter 110 mm drive capacity - main spindle 20/10,5 kW spindle tunring speed 6.000 U/min torque 45 Nm spindle nose A2-5 spindle passage 45 mm spindle bearing diameter 90 mm Drive power - sub spindle 7,8 kW number of tool places 12 Pos. shank size for square tool 25 x 25 mm Shank diameter for boring bars 40 mm tool taper BMT 55 Live tool torque (Max./Cont.) 44,4/23,4 Nm total power requirement 49 kVA Overall size ca. 4.130 x 1.752 x 2.085 mm weight of the machine ca. 4.200 kg In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1998, voltage 400/50 V/Hz output 13 kw The Parker Polyflex SMM100 is a specialized hose assembly machine designed for the precise assembly of ultra-high-pressure thermoplastic hose lines. A safety three-jaw chuck ensures stable fixation and reliable force transmission during the pressing-in of fittings. In our estimation, the machine is in good used condition and can be inspectedunder power by appointment. Guodpfxszz S Nde An Isg Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M08E/9141, Offer Number: M08E/9141 Machinetype: 4 die - 4 blow transfer header Guodpfjy Dc H Uex An Iog Info: bushing cut-off Make: PELTZER-EHLERS Type: GB30-4 Constr. year: 1977 diameter range: 16 - 30mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 260 mm shaft length under head: 225 mm output - pieces/min: 60-80 press power: 450 t Location: Europe

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 Gedpfx Aezz S R Uen Isug tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1992, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle tunring speed 20 - 3.200 U/min main drive motor 22 kW quill stroke 100 mm distance spindlenose - table min./max. 138/600 mm Feed ( x / y / z) 3.000 mm/min rapid traverse ( x / y / z ) 60/50/60 m/min total power requirement 27 kW In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Gedpfx Anozz S Rho Ijug Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2002, 200 kg Gjdszz S I Tjpfx An Isug The robot has not been tested and is being sold as a source of spare parts. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2020, condition: used, Mains voltage 400V, 3 Phasen, N, PE, 50 Power consumption 40 KVA Network backup 32 A PTA main flow (25% ED) 280 A Pilot main current adjustable 5 - 20 A PTA burner PT 200 S-AUT In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gusdpfxjyu U E Nj An Ieg Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2003, turning diameter over bed 330 mm centre distance 1.000 mm centre height 167 mm spindle bore 38 mm turning diameter over cross slideways 210 mm spindle tunring speed 40 - 2.500 U/min x-axis 190 mm z-axis 92 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Godpfx Ajy Ty I Ion Ioug Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M14I/9096, Offer Number: M14I/9096 Machinetype: thread rolling machine - flat die Gedpfjyya Sgsx An Ijug Make: PELTZER-EHLERS Type: NKW-16 Constr. year: 1977 diameter range: 8-16 mm shaft length under head: 25-160 mm max. thread length: 80 mm output pieces/min: 100 Location: Germany

Condition: used, Year of construction: 2017, control Heidenhain CNC-Pilot 640 turning length 500 mm spindle tunring speed 5.000 U/min drive capacity - main spindle 100/40% ED 25/34 kW tool taper VDI 30 number of tool places 16 Pos. Number of working hours ca. 29.259 h spindle hours ca. 7.351 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping unit (Ø 77 mm) - Differential pressure clamping for the main spindle - 16-station disc turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter system (40 µm filtration fineness) Gusdpszyvcfsfx An Ieg - Level monitoring - Connection port for oil mist extractor - Coolant spray gun - TurnPlus Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg Gujdpfx Anjzrh N Uo Ieg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 2.000 mm z-travel 550 mm Control Siemens Gedpfxozwg Utj An Ieug number of spindles 4 Stück Pneumatics 5,5 bar weight of the machine ca. ca. 28 t The machine has undergone an extensive overhaul. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, x-travel 400 mm y-travel 315 mm z-travel 400 mm control Dialog 4 spindle tunring speed 3.150 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Godpfxjzz S Rnj An Isug Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 2023, condition: used, Pump speed 2.934 U/min Nominal delivery flow 45 m³/h Rated head 92,8 m Capacity 18,5 kw In our assessment, the pumps are in good used condition. Gujdpfxszz S Nqe An Isg Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2007, Control SIEMENS 840D powerline spindle drive 11 kW grinding wheel diameter 400 mm grinding wheel width 100 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Guodpfx Aozy Sinsn Iog Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M06L/7593, Offer Number: M06L/7593 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP16 Guodjwi S Swepfx An Ijg Constr. year: 1972 diameter range: 8-16 mm shaft length under head: 25-180 mm max. cut-off length: 220 mm output - pieces/min: 70 Location: In our warehouse

Condition: used, Control Siemens In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Gsdpfxozzrhto An Ijug Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2000, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 16 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gsdpfxszy Sibj An Ijug Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar Gujdpfezz S Nwjx An Iog - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!