Van Randwijk

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Rcjdpfoxtmyzsx Ab Rsh Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Number of wires: 5

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Baling Press Strautmann, Type BaleTainer, Pressing Force 60 t, Year of Manufacture 2022, incoming. Further images to follow. Technical Data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Manufacture: 2022 Pressing Force: 60 t Total Connected Load: 9.2 kW Filling Opening Height: 1370 mm Filling Opening Width: 1069 mm Bale Dimensions: 1,100 x 1,100 x 800 mm (W x D x H), 3 plates Bale Weight: up to 400 kg (3 plates) Tying: 4-fold vertical Rcsdpextad Tofx Ab Reh Machine Dimensions with Feed: 6,355 x 2,056 x 2,756 mm (L x W x H) Weight: approx. 7,500 kg Materials: Paper, cardboard, PET bottles, film Please note: All technical data is based on manufacturer specifications. We accept no liability for the accuracy of the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale on advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 FU Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Rcodsxr N Tbopfx Ab Roh Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 43,466 h, functionality: fully functional, pressing force: 145 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,080 mm, bale height: 1,100 mm, bale weight: 1,250 kg, overall weight: 42,000 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer Paal GmbH Typ Konti 600 E Rjdpfxsxru Nbj Ab Rsch Year of construction 2004 Operating hours 43,466 hours, as of October 2025 Press power main press 145 tons Specific press force 11,8 kg/cm² Feed channel 2,000 x 1.020 mm (l x w) Filling volume 3.45 m³ Throughput capacity when idle 900 m³/h Throughput capacity under operating conditions 540 m³/hour Bale size 1,080 x 1,100 mm, length variable Drive power 3 x 45 kW Connected load 180 kW Rated current 330 A Main fuse min. 400 A, max. 500 A Tying system 4-fold vertical, fully automatic Bale weight up to 1250 kg, depends on material Throughput capacity at a bulk density of: 35 kg/m³ approx. 15 t/h 60 kg/m³ approx. 25 t/h 100 kg/m³ approx. 39 t/h Volume hydraulic oil tank 3,100 l, type HPL VG 68 SPS controller Siemens Simatic S7-300 Operating panel Siemens Multi Panel Transport dimensions only baler 14,365 x 2,60 x 3,640 mm (l x w x h) Machine weight baler approx. 42 tons Condition of the baler: The press is currently still in operation and is scheduled to be replaced by a new press in the first quarter of 2026. It is in satisfactory condition and ready for operation. However, the press should be serviced and partially overhauled before being put back into service. Scope of delivery: Only the baling press is for sale, without conveyor belt, wire pulling stations and bale chute. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Rcodpfxsxrta Ej Ab Rsh Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1992, Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously -Drive power: 2.02 kW -Filling opening: 1190/990/H670 mm -Bale volume: 1 m³ -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg Redjxrpi Aepfx Ab Rsch

Condition: excellent (used), Year of construction: 2018, pressing force: 80 t, bale weight: 600 kg, DIXI 80 SLS horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Rodpfx Aboxrbiuj Rech Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: used, Year of construction: 2014, operating hours: 7,145 h, functionality: unexamined, Baler Presto HPK 50 HS, Year of Manufacture 2014 Rcjdpfsxqyc Rjx Ab Reh Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (L x W) Channel Cross-section: 700 x 950 mm Max Fill Volume: 1.06 m³ Cycle Time: 20 s Binding: 4-fold Throughput Performance at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET Bottles Please note: All technical data are based on the manufacturer's information. We do not accept liability for the accuracy of the stated details or any potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, with prepayment and without warranty or guarantee.

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Rcsdpfxoxqxurs Ab Roh Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, cartons Operating manual is available. Note: The baler is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. The video can be found on our website or YouTube channel. The hydraulic hoses should be replaced. Inspections, including powered demonstrations, are possible at any time by arrangement. Upon request, we will also conduct tests with your material for a nominal fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s specifications. We do not assume liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Baler Austropressen AP 25, semi-automatic, with bin lift-tippler for MGB, year of manufacture 2020 Technical specifications: Manufacturer: Austropressen Model: AP 25 Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Tying: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200–300 kg Machine weight: approx. 3,400 kg Materials: Paper, cardboard, film, metals, foams, etc. Note: The baler is in very good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Full documentation is included. Viewing, including under power, can be arranged by appointment. On request, we can also test your material for a compensation fee. Rcodpjxqxtujfx Ab Reh We are happy to answer any questions about the machine by phone Monday to Thursday from 8 am to 2 pm and Friday from 8 am to 1 pm. Please note: All technical data is based on the manufacturer's specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Viewings are possible by arrangement. Sale is ex-works, against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2005, operating hours: 16,304 h, Baler HSM VK 4012, Year of Manufacture 2005 Manufacturer: HSM Model: VK 4012 Year of manufacture: 2005 Operating hours: 16,304 Pressing force: 45 t Drive power: 15 kW Filling opening: 820 x 1250 mm (W x L) Capacity at 50 kg/m³: 8.7 t/h Bale size: 900 x 720 x 600-1200 mm Bale weight: 250-400 kg Tying: 3-fold, automatic Transport dimensions: approx. 7,200 x 2,300 x 2,400 mm (L x W x H) Weight: approx. 8,000 kg Materials: Paper, Cardboard, Film Remarks: The press is in good condition. Documentation is available. Rcjdpfxsxqxthj Ab Roh Please note: All technical data are based on manufacturer information. We assume no liability for any errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, with no warranty or guarantee.

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Rcjdoxqmb Tspfx Ab Roh Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg

Condition: excellent (used), Year of construction: 2018, pressing force: 70 t, bale weight: 600 kg, HSM HL 7009 Re/Li Horizontalballenpresse. Die Maschine befindet sich in sehr gutem Zustand und wird regelmäßig von einem autorisierten Servicecenter gewartet. Diese Ballenpresse ist für größere Entsorgungsprojekte im Einzelhandel sowie in kleinen und mittleren Zentrallagern konzipiert. Die Ballen des Modells HL 7009 haben einen Querschnitt von 1100 x 1100 mm und können bei einer Ballenlänge von 1200 mm bis zu 600 kg wiegen. Dies gewährleistet eine optimale Ausnutzung der Nutzlast des LKWs. Presskraft: 700 kN Spezifische Presskraft: 58 N/cm² Antriebsleistung: 10,5 kW Spannung / Frequenz: 400 V / 50 Hz Leerlaufleistung (theor.): 42,97 m³/h Einfüllöffnung Breite x Länge: 890 x 1020 mm Rcjdpfx Aexql N Asb Roh Ballen Breite x Höhe x Länge: 1100 x 1100 x 1200 mm Gesamtlänge x Breite x Höhe: 5366 x 2525 x 2559 mm Ballengewicht: 600 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Rcsdpfxsxpxhvo Ab Rjh

Condition: ready for operation (used), Year of construction: 1996, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: LP100DH4, Type: LP 100 DH4 Year of manufacture: 1996 Pressing force: 100 t/1000 kN Electric motor power: 2x55 kW Capacity: 960 m³/hour Capacity at density 30 kg/m³: 13-17 t/h Rcjdpfx Abjxn T S Tj Rjh 50 kg/m³: 17-21 t/h 100 kg/m³: 21-32 t/h TBO 22-33 t/h Loading hopper: 2050 x 1100 mm Press chamber volume 3.7 m³ Bale weight: up to 500-725 kg Bale height: 750 mm Bale width: 1100 mm Bale length: adjustable Number of vertical strapping rows: 5 Oil tank capacity: approx. 2000 liters. Maximum oil pressure: 250 bar Machine weight: approx. 35 tons Digital display for fault indication: 100 mm Loading hopper Guide device for bales from the chute to the floor Fully automatic strapping device with 5 rows of strapping wire Wire guides for feeding from 10 coils weighing 500 kg. Cartridge hydraulic system assembly Control system for 2 conveyors Press control system with PLC controller Photocells for two-level filling of the press chamber Time counter Bale counter Bale length measurement counter Technical documentation

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Stock no.: 9960 Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Rcjdpfxjxn Ilzs Ab Reh Bale weight: 550 kg Dimensions (WxDxH): 1700 x 1800 x 2200 mm Weight: 2430 kg Materials: Paper, Cardboard, Film Operating manual is available. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the given specifications or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex-works, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Rodpjxnzf Iefx Ab Rech Model: VK 20/1200 Motor: 11 kW Final bale size: 700 x 800 mm Bale weight: 200–350 kg

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: every machine comes with a bundle of binding wire (120 wires). Need more binding wire bundles? Request a free quote. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond promptly, and ensure you quickly have access to the right machine. You are welcome to inspect the machines at our location: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to properly inform you and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing Rsdpfx Ajxnxntob Rech

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-press 860 plus Year of manufacture: 2009 Pressing force: 418 kN Voltage: 400 V Rcsdpfx Aexnxmvsb Rsh Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Fill opening dimensions: 120 cm x 65 cm x 85 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires).

Condition: good (used), Year of construction: 2006, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Bramidan, cabinet press vertical baler -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure: 50 t -Filling opening: W x H 1350 x 760 mm -Bale ejection device: bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) Rsdpfx Ajxnb Nyob Rjch -Weight: 2750 kg

Condition: used, Year of construction: 2018, operating hours: 40,350 h, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Rjdpfx Aoxm Shqsb Rech Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 26 t, filling opening width: 1,500 mm, filling opening length: 630 mm, bale length: 1,500 mm, bale width: 800 mm, bale height: 1,140 mm, bale weight: 500 kg, total width: 1,060 mm, total height: 2,576 mm, total length: 2,075 mm, overall weight: 1,220 kg, noise level: 65 dB, power: 4.6 kW (6.25 HP), Powerful bale press Orwak 3820 Power. Rcedpfx Ajxmvc Ejb Roh Extra good machine for big dimensions cardboard or foil because of the extra large feed opening 1500 x 630 mm.

Condition: excellent (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), operating pressure: 280 bar, Technical data baler: Manufacturer BOA Type 2040.S. 4V (6) 71.30 Year of manufacture 2002 Operating hours approx. 66,568 hours, as of October 2025 Effective pump running time 13,614 hours, as of October 2025 Number of bales pressed 139,167, as of October 2025 Pressing force main press 71 t Specific pressing pressure 9.0 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 45 kW Tying system 4-fold vertical, fully automatic Throughput rates for quality: Bulk density 20–30 kg/m³, throughput capacity up to 9 tonnes/hour Bulk density 40–60 kg/m³, throughput capacity up to 16 t/hour Bulk density 80–100 kg/m³, throughput capacity up to 21 t/hour Bulk density 100–150 kg/m³, throughput capacity up to 28 t/hour Bale weight up to 600 kg/bale, depending on material Hydraulic oil tank capacity 800 l Rcsdpfxoxmk Ivj Ab Reh Transport dimensions 10,020 x 2,060 x 3,250 mm (l x w x h) Machine weight press approx. 26 t Noise level <90 dB (A) Technical data for the chain belt conveyor: Manufacturer BOA Type 1500 HS 29° KTH 3000 *13625 * 1500 Year of manufacture 2002 Drive power 7.5 kW Length of feed belt 2,600 mm Length of incline belt 13,625 mm Length of gooseneck 1,500 mm Incline 29° Useful width 1,425 mm Overall height of conveyor belt 7,065 mm Height of side wall of feed belt, inside 500 mm Height of side wall of ascending belt, inside 800 mm Pit dimensions for conveyor belt 5,500 x 2,800 x 800 mm (l x w x d) Technical data for PET bottle flattener: Manufacturer BOREMA Type L 1600 Year of manufacture 2002 Suitable for returnable bottles with a capacity of 0.33 to approx. 2 litres Throughput approx. 50,000 PET bottles/hour Dimensions of feed opening 700 x 530 mm Drive motor power 11.5 kW Adjustment motor power 0.55 kW Pressure vessel 6–10 bar Working pressure 3.5 bar Connected load 27.7 kVA Main fuse 3 x 40 AT Scope of delivery: 1 piece used baler BOA 2040.S. 4V (6) 71.30 10 pieces wire reel stands, without wire 6 pieces wire deflection stations 1 piece bale slider 1 piece chain belt conveyor BOA 1500 HS 29° KTH 3000 *13625 * 1500 1 piece BOREMA PET bottles flattener type L 1600 1 piece of BOREMA PSS ibor 12 non-contact personal protection system 1 piece of machine documentation The machines were used in a PET recycling plant for compressing sorted PET bottles. As part of the production plant, the machines were regularly maintained and are in good condition, ready for immediate use. Comments: The documentation (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) for the press is available. An inspection is possible by arrangement. We do not accept any liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 1994, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, The HSM AK 1200 automatic horizontal baler is equipped with an automatic binding system. The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats Rcsdpfx Aexmgm Ueb Reh and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: excellent (used), functionality: fully functional, Safe Waste Compactor Hydraulic waste compactor that compresses directly into the waste storage container, easily adaptable for standard 1100, 660 (or 770*) litre, 4-wheeled, lidded – most often green – bins (Sulo, Otto, Schäfer, etc.). For bagged and bulk waste Compression ratio is between 1:4 and 1:8 depending on the waste composition, saving approximately 75% in waste transportation costs. Safe design Redpfx Aexmbg Njb Rjch ORWAK bin compactors are robust and can be operated safely. During compaction, it is not possible to reach inside the machine, ensuring operator safety. Both external and internal surfaces are easily accessible for quick and simple cleaning. The waste compactor can be used with all types of standard 1100, 660 (or 770*) litre plastic waste bins, whether with flat or semicircular lids! We can assist with transportation.