|
5
used
Microprocessor controller temperature control of injection molding machine
Uvjgnrs7
-11 circuits
Tax connections
Weight 20 kg more
|
|
4
screw size 37 mm
injection shot weight in Polysterol 866 g/PS
closing pressure 3200 kN
Control Siemens Siject
screw ratio 20
cylinder head volume 952 cm³
injection capacity 261 g/sec
screw speeds 0-180 U/min
stroke 610 mm
distance between columns 610 x 610 mm
height of form 220 - 650 mm
ejector capacity 50 / 170 kN / mm
9
heating capacity 19 kW
50 kg
16 Mpa
oil volume 600 l
weight of the machine ca. 12 t
dimensions of the machine ca. 7300 x 1900 x 2500 mm
Nlmrx
as good as new, was used ... more
|
|
4
screw size:40 mm
injection shot weight in Polysterol:172 g/PS
closing pressure:1000 kN
daylight:420 x 420 mm
opening stroke:500 mm
mould height - Max./min.:250 mm
control:Selogica
daylight between platens - max.:750 mm
total power requirement:23,9 kW
weight of the machine ca.:3,7 t
dimensions of the machine ca.:4,20x1,65x2,00 m
about 11.000 till 12.000 operation hours
Jubilee model type Golden Edition
- productivity package with energy saving system AES
(variable speed drive motor)
- with Sel... more
|
|
2
2000
ready for operation (used)
General Data
Measurements width 7915 mm
Measurements depth 2407 mm
Control Unit
Model NC 1V
Injection Unit
Screw diameter 60 mm
Shot weight 690 g
Clamping Unit
Clamping force 4200 kN
Distance between bars 800mm x 710mm
This DEMAG Ergotech 4200-1450 Injection Moulding Machine was built in the year 2000 in Germany. It is operated through a DEMAG NC 1V control unit. This machine can perform with a clamping force of 4200 kN, and a screw diameter of 60 mm. It comes with a Wittmann Robot.
2bn8brc7... more
|
|
1
screw size 84 mm
injection shot weight in Polysterol unbkt. g/PS
closing pressure 440 kN
volumn 1660
volt V
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
B98ldggs more
|
|
13
Manufacturing origin CE - Germany
Voltage 400 V 50Hz 104A
Netweight 8000 kg
Dimensions 537x146x206 cm
TECHNICAL DATA
Clamping unit 160/520-680
Clamping force / locking force 1600 / 1760 kN
Max. mould opening stroke 495 mm
Mould height minimum 275 mm
Max. / enlarged mould height 585 / 685 mm
Daylight between platens, max / élargie 1080 / 1180 mm
Mould platen (h x v) 760x785 mm
Distance between tie bars (h x v) 520x520 mm
Min. permissible mould diameter Ø 300 mm
Max mould weight / mov. Pl... more
|
|
4
screw diameter: 28 mm
injection shot weight in Polysterol: g/PS
closing pressure: kN
lockforce: 22 t
moulding weight: 40 g/PS
daylight between columns: 258 mm
cylinder head volume max.: 49 ccm
injection pressure: 930 bar
tank: 125 l
total power requirement: 8,5 kW
weight of the machine ca.: 0,7 t
space requirements of the machine approx.: L:2,3xB:0,75xH:3,4 m
Injection molding machines with protective grid
Processing of materials:
thermoplastics, elastomers, PVC, processing of rubber and/or the... more
|
|
1
screw size:22 mm
injection shot weight in Polysterol:31,4 g
clamping force:500 kN
screw size:22 mm
Sthb0k
injection shot weight in Polysterol:31,4 g/PS
cylinder head volume:34,2 cm³
injection pressure:1.606 bar
clamping force:50 t
tie bar distance:370 x 370 mm
mould hight min.:150/370 mm
opening stroke:280 mm
microprocessor control:MC5
screen text:Deutsch/german
robot interface:Euromap 67
core pull:1 x, pneumatisch
Hotrunner:12
total connection power:18,0 kW
total weight:3.200 kg
dimension ... more
|
|
4
screw size:40 mm
injection shot weight in Polysterol:166 g/PS
closing pressure:1600 kN
Buajadpa
daylight:470 x 470 mm
opening stroke:650 mm
mould height - Max./min.:300 mm
control:Selogica
daylight between platens - max.:950 mm
CS version IV
- LCD colour monitor, colour type
- Selogica control unit
- technology step 2 servoregulated with 2 regulating pumps
- highly wear resistant plastification unit
- bigger holding pressure pump for simultaneous movements of of the minor axis
- increas... more
|
|
5
2007
ready for operation (used)
General Data
Measurements width 5070 mm
Measurements depth 1400 mm
Measurements height 1945 mm
Injection Unit
Stroke volume 220
Injection pressure 1700 bar
Clamping Unit
Clamping force 1250 kN
Opening stroke 410 mm
Distance between bars 450 mm x 400 mm
Mould height min 150 mm
Mould height max 500 mm
Additional Equipment
Euromap automatic table height adjustment
General Data
Measurements width 5070 mm
Measurements depth 1400 mm
Measurements height 1945 mm
Injection Unit
Stroke volume 220
Inj... more
|
|
1
screw size 98 mm
injection shot weight in Polysterol unbkt. g/PS
closing pressure 550 kN
volumn 2640
volt V
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
B97ya08q more
|
|
5
used
Microprocessor controllers, temperature controllers, injection molding machine
-9 circuits
Range [...] °
Output power 16A/3600 W
Dsgjfuh
Control cable
Operating instructions
Weight 40 kg more
|
|
1
1990
used
screw size 25 mm
moulding weight 41,8 g
closing pressure 350 kN
tie bars distance 304 x 304 mm
opening stroke 325 mm
dayligth 150 mm
injection pressure 2149 bar
total power requirement 14,5 kW
weight of the machine ca. 2,2 t
Oiphs8gvy
Control: Unilog 4000 B
Machine has one pit draw.
belt convoyer
HB-Therm 80°
Serial Nr. A35/04/11/0/05 more
|
|
5
used
|
|
3
screw size:40 mm
screw size:40 mm
injection shot weight in Polysterol:166 g/PS
closing pressure:1300 kN
daylight:470 x 470 mm
opening stroke:575 mm
mould height - Max./min.:275 mm
control:Selogica
daylight between platens - max.:850 mm
dimensions of the machine ca.:4,50 x 2,00 x 2,20 m m
weight of the machine ca.:6,3 t
Npx8l
total power requirement:33,4 kW
S-version IV
- with Selogica control
- technology step 2 - with 2 regulating pumps
- connection for mould blow unit with pressure reducer... more
|
|
3
2012
ready for operation (used)
Control Unit
Brand Netstal
Release Graphtrack/DSP
Main Drive
Distance between bars 560 x 560 mm
Clamping Unit
Clamping force 2000 kN
Opening stroke 510 mm
Distance between bars 560 x 560 mm
Mould height max 510 - 800 mm
Media
Main electronic connection 400 V / 50 Hz
Power consumption 55 kW
Additional Equipment
Complete audited
Wear parts replaced
Mechanical parts refurbished/replaced
Machine operational with 6 months of warranty
This Netstal PET-LINE 2000-3700E Injection Moulding Machine... more
|
|
1
screw size 84 mm
injection shot weight in Polysterol unbkt. g/PS
closing pressure 440 kN
volumn 1660
volt V
total power requirement kW
weight of the machine ca. t
B98bsasr
dimensions of the machine ca. m more
|
|
8
Demag Kunststoffspritzgießmaschine Injection machine
Hersteller [manufacturer]: Demag
Typ [ type]: ErgoTech system 3300-1450 compact
Steuerung [control unit]: ErgoControl NC4 Demag NC4
Inkl. Handheld
Inkl. Handlingssystem/Handlingunit
Services/maintenances: ErgoCheck durch Demag/Hersteller
Baujahr[construction year]: 1998
Gewicht [weight]: 15.000kg
Schließkraft 330to.
Bg2xa923xm
Vollständige Dokumentation, Servicereports sind vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.... more
|
|
3
used
|
|
4
screw size:30 mm
injection shot weight in Polysterol:65 g/PS
closing pressure:400 kN
daylight:270 x 270 mm
opening stroke:350 mm
mould height - Max./min.:200 mm
control:Selogica (1. Version)
daylight between platens - max.:550 mm
total power requirement:21 kW
dimensions of the machine ca.:4,30x1,60x2,08 m
few operation hours - condition like new -
- wear reisistant plastification unit
- fully hydraulic clamping unit
- with Vario system
- mould blow unit
- sorter unit
- interface for host co... more
|
|
3
1992
ready for operation (used)
Injection Unit
Injection pressure 1421 bar
Clamping Unit
Clamping force 5000 kN
Mould height min 375 mm
Mould height max 850 mm
2ro7me
This Battenfeld BK-T 5000-4000 Injection Moulding Machine was made in the year 1992. This machine can work with a clamping force of 5000 kN, and an injection capacity of 1421 bar. This Battenfeld stands out for the size of its mold platens, of about 815 x 815 mm.
Application Types
Injection Moulding more
|
|
1
screw size 72 mm
injection shot weight in Polysterol unbkt. g/PS
closing pressure 440 kN
volumn 1040
volt V
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Beoe2rjl0t more
|
|
4
1989
used
screw size 22 mm
moulding weight 33,4 g
closing pressure 200 kN
Bd32cnqg3
tie bars distance 254x254 mm
opening stroke 300 mm
dayligth 125 mm
Dimensions (L/W/H) 2,6x1,1x1,7 mm
total power requirement 9 kW
weight of the machine ca. 2 t more
|
|
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 35 mm
- Shot weight max: 124 g
- Injection rate: 172 cm³/s
- Injection pressure: 1.620 bar
- Injection volume: 135 cm³
- Screw speed: 480 rpm
Glvyqcl
- Screw L/D ratio: 17, more
|
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
