Used Router for sale (399)

Condition: used, Year of construction: 2013, travel distance X-axis: 3,300 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, TECHNICAL DETAILS Working area, X-axis: 3,140 mm Working area, Y-axis: 1,560 mm Travel distance, X-axis: 3,300 mm Travel distance, Y-axis: 2,000 mm Number of controlled axes: 3 Milling spindle Number of controlled axes: 3 Number of tool positions: 16 MACHINE DETAILS Fodpfx Aj Aihdwjanepp Number of vacuum pumps: 2 Suction capacity per vacuum pump: 250/300 m³/h EQUIPMENT Flat table Milling spindle on top Automatic tool changer Liquid cooling for the milling spindle Tool magazine on the rear of the machine Vacuum pumps FANUC panel control CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8497

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table dimensions: 900 × 770 mm Additional work table: 1,000 × 300 mm Table height adjustment: 115 mm ROUTING HEAD Speed: 10,000–20,000 min⁻¹ Fpsdpfxs Ad Igze Aanop Swivel range of routing head: 0–60° Spindle stroke: 135 mm Spindle diameter: 85 mm MACHINE DETAILS Manufacturer: SCM Type: R9 Year of manufacture: 1977 Machine type: Overhead router Dimensions (L × W × H): 1,650 × 1,250 × 2,000 mm Weight: 1,500 kg

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Fjdpfxsz N Swie Aanopp Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18043108351805, functionality: fully functional, operating hours: 1,500 h, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 700 mm, number of axes: 3, number of slots in tool magazine: 1, total height: 2,250 mm, total length: 3,600 mm, total width: 2,650 mm, overall weight: 1,750 kg, table length: 2,500 mm, table width: 1,300 mm, year of last overhaul: 2018, Equipment: CE marking, documentation/manual, The machine was purchased in 2018 and has not been used for the past three years, since 2023. It has primarily been used for wood processing. The machine was intended to produce high-quality picture frames for some of the most renowned international art, including modern art, as well as historically accurate frames for Dutch Renaissance paintings, for public institutions such as the National Gallery of Denmark and the Nivågård Collection. Fpedpfx Aae Aip Snsnep

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Fpsdpfx Aezmukusanjp

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) Fpjdpsz Hc T Usfx Aanep 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: as good as new (ex-display), single phase, 1950 kg, dust extraction, vacuum table with four individually controlled sections, water cooled 6kw 24000 rpm spindle, A2 hand held controller.spindle, Fsdpfxshh Anrs Aanepp

Condition: ready for operation (used), Industrial CNC router for sale – AXYZ Automation Group Automation Series 6010, fitted with a high-speed Perske GmbH spindle. Fpedoy A R Dxjpfx Aanep This is a large-format production machine suitable for woodworking, plastics, signage, and light aluminium work. Solid gantry construction with vacuum bed – ideal for sheet materials. ⚙️ Key Specs Model: AXYZ 6010 (6000 Series) Bed Size: approx. 10ft x 6ft (3048 x 2150mm) Spindle: Perske high-speed spindle Power: approx. 4kW / 5.5HP Speed: up to 18,000 – 21,000 RPM Bed: Vacuum table (grid type) Axes: 3-axis gantry CNC Power: 3-phase Build: Heavy-duty industrial frame

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Fpsdpfsz Iz Imox Aanop Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Fsdpfozvvc Dox Aanopp Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Fodpfxjza U Nxe Aanjpp

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table Fpedpfx Aajztxt Hjnep - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 5429, table width: 4,800 mm, table length: 2,600 mm, table height: 600 mm, workpiece height (max.): 1,200 mm, travel distance X-axis: 4,800 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, We are offering this used CMS ARES 348/26-NEWPX5 vertical machining center, manufactured in 2009. Manufacturer: CMS Model: ARES 348/26-NEWPX5 Year of manufacture: 2009 Serial number: 5429 Machine type: Vertical machining center 5-axis CNC gantry milling machine | Year of manufacture 2009 | FANUC control Fully operational industrial 5-axis CNC gantry milling machine from CMS (Italy). The machine has been used for milling, drilling, and contour machining of aluminum honeycomb panels, sandwich panels, and other technical sheet materials. Working demonstration possible in Tilburg. Technical specifications Manufacturer: CMS, Italy Model: Ares 48/26-NEWPX5 Fpjdpfx Ao Ai D Ebjanop Year of manufacture: 2009 Serial number: 5429 Number of axes: 5 CNC control: FANUC Nominal X × Y × Z travel: approx. 4,800 × 2,600 × 1,200 mm (X/Y to be verified) Workpiece clamping: Aluminum vacuum grid table with multiple zones Tool changer: Automatic tool magazine, 16 positions Condition: Fully operational CE marking: Present Included spare parts: * Reconditioned spare milling spindle, CMS 12 kW, max. 24,000 rpm; type CMS 63 F; item number 0014477. Reconditioned and supplied by D.E. Spindel Doctor in 2020, including wooden transport crate. * New, unused spare vacuum pump, Busch SV 1025 D 000, year of manufacture 2018, with 3-phase electric motor and filter system; unused and in original packaging. Current application: Milling of aluminum honeycomb and sandwich panels, composites, plastics, technical sheet materials, and large three-dimensional workpieces. The Z-axis travel of 1,200 mm provides space for taller products and molds; the actual machining capabilities depend on the tooling and workpiece clamping. Scope of supply and inspection Location: Tilburg, Netherlands. The machine is fully operational and can be inspected while running by appointment. Dismantling, transport, and reinstallation by arrangement. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, functionality: unexamined, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 130 mm, total length: 3,070 mm, table length: 2,800 mm, table width: 1,340 mm, total width: 1,800 mm, spindle speed (max.): 30,000 rpm, total height: 1,420 mm, overall weight: 500 kg, spindle motor power: 2,200 W, controller manufacturer: CNC-STEP (KinetiC-NC), number of axes: 3, Equipment: documentation/manual, We are selling our CNC portal milling machine, CNC-STEP High-Z T-Rex S-1224, with extensive equipment. The machine was purchased new in 2019 (total investment approximately €39,900 net) and is suitable for milling and engraving aluminum, plastic, and wood. Condition: The machine is generally functional. However, after being transported to its current location, it has not been fully reassembled and connected, so its functionality cannot currently be tested. An inspection is possible, but a test run under power is not. Technical data: - Travel distances: X 2,400 mm / Y 1,200 mm / Z 130 mm - Clamping area: 2,800 x 1,340 mm - Drive: 3 brushless stepper motors, ball screw spindles on all axes - Linear guides HIWIN/THK on all axes - Rapid traverse max. approx. 12,000 mm/min, working speed max. approx. 8,000 mm/min - Repeatability approx. 0.01 mm - Overall dimensions approx. 3,070 x 1,800 x 1,420 mm, weight approx. 500 kg Equipment: - High-frequency spindle Mechatron ATC-8022-30: 2.2 kW, 30,000 rpm, HSK25/ER16, pneumatic, with control cabinet and frequency inverter - 5 tool holders HSK-E-25-ER16, collet set ER16 - Tool length sensor - Vacuum table covering the entire area (MDF), 2 side channel blowers each 4 kW (high voltage) Fedpfe Af Ifzex Aanepp - Minimum quantity lubrication - T-slot table - KinetiC-NC control system with wireless remote control, emergency stop - Control laptop (ASUS) included - CAM software VCarve Pro - Operating manuals and wiring diagrams Without automatic tool changer. Notes: - Inspection possible by arrangement (not under power) - Disassembly and transport by the buyer, we will assist with the forklift during loading - Sale excludes any warranty - Invoice with VAT shown

Condition: used, Year of construction: 2006, functionality: fully functional, MILLING PRINTING MACHINE TECNOMAX MOD. ROUTER F Fpjdex Rc Ncjpfx Aanep - Year 2006

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 80 h, total height: 1,900 mm, total length: 4,200 mm, total width: 2,250 mm, overall weight: 2,000 kg, Very less used 3 axes CNC machine. Fpsdpfezvnpcex Aanop Installed 10/2025. Available October 2026 Spindle 9kW Automatic tool changer for 8 tools, ISO30 ER32 Working area 2000x3000x260mm

Condition: used, Year of construction: 2013, KONGSBERG CUTTERS HAVE SUPERB BUILD QUALITY, COMPREHENSIVE TOOLING, CUTTING ACCURACY AND GREAT SOFTWARE REFURBISHED 2013 KONGSBERG XP24 CUTTER Fpsdpfxoz S Hx Hj Aansp Excellent condition 3200 x 1680mm work area 1Kwatt Router for milling (refurbished new spindle) Heavy duty tool / large & small crease wheels V Notch tool, high force knife, oscillating knife I cut software / PC New conveyor belt recently fitted 3 Phase extractor, 6kwatt Busch vac pump & silencer

Condition: used, machine/vehicle number: 008550, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 28 Fedez Eyycspfx Aanjpp Total number of tool changer positions: 16

Condition: good (used), Electrical specifications: Fpodpfoz Rpi Ssx Aansp 2A/420W 3900 rpm 220V, 50Hz Includes a rubber cutting disc for repairing scratches and edges. The unit is ready for use. Height: 230 mm Depth: 230 mm Width: 200 mm Weight: 3200 g Condition: good, second-hand

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Fedpow Ip Dgefx Aanjpp Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: AA1/014223, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,725 mm, travel distance Z-axis: 340 mm, workpiece length (max.): 2,690 mm, workpiece width (max.): 1,240 mm, number of axes: 3, number of slots in tool magazine: 8, controller manufacturer: ESA GV - XILOS PLUS, actuation type: electric, total height: 2,897 mm, total length: 3,800 mm, total width: 2,400 mm, overall weight: 2,600 kg, table length: 2,740 mm, table width: 1,255 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, SCM Pratix 48 NST CNC machining centre for drilling and routing, year 2004, from the closure of a small, artisanal woodworking shop (no heavy industrial shift production). Machine in excellent condition, stored indoors, inspected and serviced by an official SCM technician. TECHNICAL SPECIFICATIONS: Working area: X = 2,690 mm | Y = 1,240 mm Axis travels: X = 2,970 mm | Y = 1,725 mm | Z = 340 mm Workpiece clearance: 200 mm Multifunctional grooved aluminium table with integrated vacuum channels (vacuum hole pitch 120 mm, groove pitch 40 mm) Pneumatic pop-up reference stops controlled by CNC SCM Power 2000 electrospindle 7.5 kW (10 HP), HSK 63F tool connection, rotation speed up to 18,000 RPM Automatic rear tool changer: Rapid, 8 positions F9 boring unit: 5 independent vertical spindles + 4 horizontal spindles (1+1 in X and 1+1 in Y) Upgraded 250 m³/h vacuum pump mounted on a mobile trolley CNC control unit: PC-Office running Windows XP with SCM Xilog Plus software interface INCLUDED ACCESSORIES & TOOLING: Original SCM right-angle attachment head with 2 horizontal outlets (for router bits with ER32 collet or saw blade up to Ø 160 mm), 360° manually adjustable Set of HSK 63F tool holders, ER32 clamping nuts, and service wrenches Extensive set of professional OMAS profile cutters and tooling for doors, windows, and solid wood joinery Modulset modular vacuum template clamping elements (H=20 mm) Original SCM user & maintenance manuals, electrical/pneumatic schematics, and original CE Declaration of Conformity TERMS OF SALE & DELIVERY: Delivery terms: Ex Works (EXW). Fpsdpfx Ae Af Ig Ueansp Dismantling, packing, loading, and transportation are entirely the buyer's responsibility and at their expense. The machine is installed and can be inspected on site under power by agreement. PLEASE NOTE: Machine fully inspected, software/hardware reset, and functionally tested by an official SCM service technician, with an official service report and complete system backup available.

Condition: used, A Bäuerle SFM-type rigid table router or rigid router for profiling and routing timber, fitted with a table extension and a feed mechanism. Technical data: Fodszryp Topfx Aanspp - Spindle diameter: 30 - Clamping length: approx. 120 mm - Speed (milling cutter): 3,000/5,000/6,000/10,000 rpm - Direction of rotation: anti-clockwise and clockwise

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Fedpfoyr Ugujx Aanepp Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: - Motors: 2 - Length: approx. 320 cm - Width: approx. 140 cm Fpsdpoztvywefx Aansp - Height: approx. 160 cm - Table: swivelling - Technical details: on request

Condition: used, Bernardo Type T 1000S swivel-spindle router for versatile routing work on solid timber, sheet materials and profiles. The machine is ideal for joinery and carpentry workshops requiring precise and high-performance milling solutions. Featuring a swivelling spindle, sliding carriage, angle stop and pneumatic hold-down device. Technical data: Fpodpfezryqkex Aanjp - Milling spindle diameter: 30 mm - Speed ranges: 1400 / 3500 / 6000 / 800 rpm - Clamping length: 125 mm - Motor power: 4.0 kW