Unland GmbH & Co. KG

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Ijdpfx Absyuw S Eovotd Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover Iedpfoyuuzdex Abvetd • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Itodpfx Aeyt N Dkebved

Condition: used, Elektrische Exzenterpresse / Electric Eccentric Press Komex Eccentric Die Cutting Machine Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Itsdpfx Aoyt H Ndobved On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, ETERNA 1620 SAL Extra ref 2950 year 2014 maximum sheet size: 1200 x 1620 mm material: Corrugated board Fala E, B, EB, BC Itsdpfx Aoytum Rjbvsd vacuum feeder extended feeder with sheet alignment section – mechanical register cleaning section batch delivery clamping force: 400 tons

Year of construction: 2010, operating hours: 50,000 h, condition: good (used), Bobst Novacut 106E ref. 2955 Itedpfx Absytufyeved year 2012 counter: 180 million sheets maximum output up to 8,000 sph maximum sheet format – 740 x 1060 mm material: carton, corrugated board F, E – up to 4 mm stripping section Non Stop at delivery machine elevated by 300 mm

Year of construction: 2010, operating hours: 33,000 h, condition: excellent (used), Sanwa TRP 1060 Axia ref 2962 Isdpfeytudcsx Abvotd year 2010 max sheet size 740 x 1060 mm operating hours – 32,000 h cleaning section NON Stop at feeder register control R, L motorized impression setting

Year of construction: 1979, condition: ready for operation (used), functionality: fully functional, Non-binding offer Automatic Die Cutting Machine Manufacturer: BOBST Autoplatine Model: SP-102 E Sheet Size: 1020 x 720 mm Year of Manufacture: 1979 Technical Data: - Max. Sheet Size: 1020 x 720 mm - Min. Sheet Size: 40 x 35 mm - Material Range: Paper/Cardboard: 80 – 1,000 g/m² Cardboard: 250 – 2,000 g/m² E+B flute: max. 4 mm - Max. Cutting Pressure: 250 t - Max. Production Speed: 7,500 sheets/h Itodeyrxyropfx Abvjd - Fully automatic die cutting machine with stripping station - Automatic high-pile feeder - High-pile delivery - Die cutting plates - Chase frames - Quick-action chase changing system - Complete with accessories - Machine in operating condition and well maintained - Video presentation available upon request! Price: on request Delivery: FCA Availability: immediately

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Itedpfx Aeymn Hwebved You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Year of construction: 1980, condition: excellent (used), functionality: fully functional, machine/vehicle number: 136/027, For Sale: WUPA PS 6.3 Automatic Die-Cutting Press We also offer other WUPA machines upon request. The machine underwent a complete overhaul in 2007 by QTM. During the overhaul, all major components were renewed, including the gripper bars, gripper chains, platen, and all ball bearings. Since then, the machine has been maintained in excellent condition. Comprehensive documentation is available. Both digital and hard copies of the electrical diagrams and exploded views are on hand. A production video can be provided upon request. Technical Specifications: Model: WUPA PS 6.3 Year of manufacture: 1980 Maximum sheet size: 1,450 × 1,020 mm Itsdpjymarrjfx Abved Minimum sheet size: 700 × 590 mm Maximum speed: 4,000 sheets/hour Maximum cutting force: 600 tons Material thickness: – Paper from 80 gsm – Board up to 2,000 gsm – Corrugated board up to E/B flute (according to our own experience) Equipment: – Non-stop feeder – Non-stop delivery Location: Germany Note: All information is provided without guarantee. Subject to errors and prior sale. If you are interested or have any questions, please feel free to contact us.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console Itedpfxsyl Unxj Abved – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel Isdpfxoyl Um Us Abvotd – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Ijdpfxjyl Umnj Abvjtd Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening Itedpfjyl Ulwsx Abved – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm Ijdpfx Abeyl Rp Sjvjtd MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Condition: used, Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Isdjylqd Aspfx Abvstd Weight 1100kgs Included frame and tools Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Nr. 2816, TMZ autoplatine, type QW 161, year of manufacture 2000, equipped with breaking station and package tray. Many spare parts available: gripper carriages, opener rods, chains, gripper bodies, and other small parts. Can be inspected in production, operates flawlessly. €22,000 plus VAT ex-location. Itsdsyk E N Dspfx Abvod

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Itsdsyhn Uqepfx Abvjd

Year of construction: 2008, operating hours: 55,000 h, condition: excellent (used), functionality: fully functional, Heidelberg Dymatrix CSB Year: 2008 Size: 760 x 1060 mm Itodpfx Ajyf E Icebvod Die-cutting, creasing, stripping and blanking unit Impressions: 290 million Maintenance: All preventive and OEM services carried out Spare parts: some available Condition: very good, in production

Condition: used, Letter Press Cylinder DIE Cutter Heidelberg KSB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Itjdpfx Absyfhthevsd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes Iedpfx Ajycv Dvebvotd – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Isdpfx Asycrz Dobvetd Year 1966 - Serial-No. 2153801 Size min. 360 x 520mm - max. 720 x 1020mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2024, condition: like new (used), Great die-cutter (easy to operate), simpler than a cylinder :) automatic die-cutter Max. paper size: 1060 x 760 mm Min. paper size: 400 x 370 mm Max. die-cutting size: 1050 x 750 mm Speed up to 7,500 sheets/hour Itodpfsyarb Sjx Abvod Max. die-cutting force: 300 t Max. sheet thickness: corrugated board up to 4 mm, cardboard 0.1 - 1.5 mm

Condition: used, Automatic Platen Die Cutter ETERNA ML 930 GII with 3 Operation modes Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Format 670 x 930mm Itsdjx U Adnepfx Abvod Operating modes: Single, Continuous nd with time delay on opening Electromagnetic clutch and brake Included frame and tools, in very good condition Safty Cover Weight 3800kgs - Power supply 380 V Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Iodjx Ndu Dopfx Abvjtd Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration