Used Magnus for sale (20)

Condition: defective spare-parts repository (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: M4I2614, total length: 2,400 mm, total width: 1,850 mm, total height: 1,350 mm, overall weight: 1,700 kg, input voltage: 220 V, plate width: 762 mm, plate length: 685 mm, empty load weight: 1,700 kg, number of drawers: 3, Kodak / Creo CTP-Quantum plate setter with 3-cassette loader – for spare parts We are selling our CTP-Quantum plate setter with a 3-cassette loader. The system has processed approximately 150,000 printing plates. Hjdpfx Abozhha Eogjp The following are for sale: CTP plate setter 3-cassette loader / multi-cassette unit / bitshooter (including XPO 3...) The system is generally in good optical and mechanical condition and was last serviced. However, based on current knowledge, there is likely a defect in the power supply board. Since another machine has been acquired in the meantime, no further repairs have been carried out. The sale is therefore expressly as a defective machine / for spare parts. Individual spare parts can also be sold by agreement. An on-site inspection is possible by arrangement. Collection, disassembly, and transport are the responsibility of the buyer. Price: €2,500.00 (negotiable) net, plus applicable VAT. VAT can be shown separately. Sale exclusively to businesses / commercial enterprises. The sale is made with the exclusion of any warranty for defects. No guarantee, no returns. Known defects are described to the best of our knowledge.

Year of construction: 2010, condition: ready for operation (used), A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible. Hsdpsy N Uxaofx Abgep

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Used, fully automatic 8up thermal CTP system Kodak Magnus 800 plate setter. Includes 5 MCU cassettes, UDR-C, and Glunz & Jensen MK III unloading and stacking unit. Year of manufacture: 2018. Prinergy TIFF Shooter on Dell Optiplex 3050 Intel Core i3. Prinergy Evo version 8.1 on Dell T-310 workstations. Plate size max: 950 x 1163 mm. Plate size min: 330 x 305 mm. Speed: F 28 plates/h. Standard resolution: 2400 / 1200 dpi. 1 pair Heidelberg Autoplate punches 425 mm. 1 pair Manroland Autoplate punches 780 mm. Hedpfxoytp Txj Abgsp

Condition: excellent (used), Year of construction: 2006, operating hours: 1,296 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,083 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (May 2023) with only 1296 laser hours 2400 dpi Hjdjyta N Dopfx Abgjp Z-speed Total imaged printing plates: 258,861 sheets Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy VPS 3 workflow with dongle, Printconsole 5.1 and Dell PowerEdge 7330

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,083 mm, KODAK Magnus VLF large-format thermal platesetter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2,615 laser hours 2400 dpi Z-speed Total imaged printing plates: 395,443 units Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Print Console enabled for all RIP software, server Dell PowerEdge T330 Hedpfeytawnsx Abgep

Condition: excellent (used), Year of construction: 2022, operating hours: 3,752 h, functionality: fully functional, Magnus 800 Plates 91251 Bacher die-cutter Hodpfsyarfwsx Abgjp TFT PC

Year of construction: 2014, condition: not inspected (used), Distribution board CTP_PWR2_400 Magnus interlock board Hjdehcz Hxjpfx Abgsp Drum drive module Output rollers

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Model / description: “MAGNUS 400 FIBER, SHIPPABLE KMAT” (Creo label) Serial: M41243 Manufactured: June 2008 Power (platesetter): 200/210/220/230/240V, 16A, 50 Hz (on the label) Laser safety: marked Class 1 laser product (normal for enclosed CTP systems) Max plate size: about 685 × 762 mm (around drum × along drum) Min plate size: about 300 × 228 mm Resolution: up to 3048 dpi Throughput: often listed around ~16 plates/hour (depends heavily on plate type + sensitivity and configuration) Machine size / weight: roughly 135 × 176 × 145 cm, ~750 kg The Magnus 400 Fiber system with Shippable KMAT configuration is a professional industrial imaging solution designed for high-precision production environments. This type of equipment is commonly used in the printing and graphic industry for processing and imaging printing plates with high accuracy and consistent performance. Hodpfeyxl N Iox Abgep The system is built for reliable operation in industrial facilities where stable production processes and dependable equipment are essential. Machines of this type are widely used by printing houses, packaging manufacturers and companies involved in graphic production workflows. The system includes industrial electronic components such as the Hu.q CSG-86 module, manufactured in July 2006, operating at 200–240 V AC, 50/60 Hz with CE and UL certification. These components are designed for long-term operation in demanding industrial environments and ensure stable system performance. The Magnus 400 Fiber CTP system is suitable for companies that require dependable equipment for plate imaging and preparation within professional printing and industrial production environments. The machine can be inspected on site and prepared for shipment. Loading and international transport can be arranged depending on the buyer’s,

Condition: used, Year of construction: 2008, machine/vehicle number: 7281, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller Hjdpszf N Dtsfx Abgop - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 31i B5, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis CHIRON DZ15W MAGNUM HS was manufactured in 2015. It features an X-travel of 730 mm, Y-travel of 400 mm, and Z-travel of 425 mm. The machine is equipped with a robust table surface measuring 1,060 mm x 430 mm. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ15W MAGNUM HS vertical machining centre we have for sale. Contact us for further details. • Quantity: 4 units available • Spindle drive: 14/15 kW • Max. torque: 95 Nm • Table surface: 1.060 mm x 430 mm Technical Specification Taper Size HSK 63 Hsdpjzhm Emefx Abgop

Condition: good (used), Steady rest COLCHESTER Magnum Hodpfezcnw Isx Abgep Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis CHIRON DZ 18 W MAGNUM was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 630 mm. The machine includes a table size of 1250 × 850 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ 18 W MAGNUM vertical machining centre we have for sale. Contact us for further details. - Control System: Siemens CNC- Spindle Taper/Chuck: SK40- Spindle Speed Range: 320 – 10,500 rpm- Tool Magazine Capacity: 2 × 12 slots (24 tools total)- Tool Change Time: approx. 1.9 s- Chip-to-Chip Time: approx. 3.9 s- Retrofit/Overhaul Date: 2021 - Complete modernization: • main spindles overhauled • ball screws replaced Hedjzcyh Ejpfx Abgep • tool changer overhauled, • axis systems/guides/bearings overhauled • hydraulic/pneumatic systems updated • electrical system and cabling modernized • safety elements replaced • geometry adjusted- Cooling System: Internal cooling (IKZ) via Knoll paper band filter and high-pressure unit (Unit Number: 646)- Chip Management: Integrated chip conveyor and swarf bin- Workholding: Hydraulic workpiece clamping on a 180-degree workpiece changing table (W-axis)- Additional Features: Prepared for 4th/5th axis integration, attached cabinet climate control unit

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, This is a 115-liter MAGNUM 3/1 GN electric braiser from premium manufacturer MKN, model Optima 850. The braiser is a multifunctional appliance for steaming, boiling, simmering, braising, and roasting. Draining is done via a safety drain valve on the front. The appliance has been tested in our in-house workshop and is fully functional. The braiser has been completely overhauled and is in excellent condition. The stated price is net plus 19% VAT. Our used appliance service for you: • 6-month warranty on all electrical parts • High-quality brand-name appliances at fair prices • Professional overhaul/inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or pickup options • Expert advice - before and after purchase • Provision of operating instructions, wiring diagrams & spare parts • Tested according to DGUV V3 Technical specifications: • W x D x H: approx. 1300 x 850 x 850 mm • Inner tank W x D x H: 700 x 540 x 250 mm • Power supply: V: 400 / kW: 19.2 • Serial number: 11203758 • Type: 2022705 • Year of manufacture: 2011 • Nominal capacity: 115 liters Condition: Used, fully Functional Further information: •Multifunctional cooking appliance for steaming, boiling, simmering, braising, and frying •Braising pan made entirely of extremely corrosion-resistant chrome-nickel steel •Frying base made of special sandwich material (MKN PowerBlock), smooth and ground •Heating via SUPRA contact heating elements for optimal heat distribution and short heat-up times •Braising pan with raised rim, tightly welded Hjdpeu S H D Njfx Abgop •High heat capacity ensures even heat transfer and minimal temperature fluctuations when loading the plate with cold food •Equipped with electronic "Eco Control" control as standard •Equipped with a double-walled hinged lid and mixer tap as standard •Drainage via a front-facing safety drain tap Shipping: • Delivery or pickup upon request • Worldwide shipping upon request • Shipping to islands or mountain stations only upon request Do you have questions, would you like advice, or would you like to reserve something? View location? You can reach us by phone during our opening hours: Monday-Friday 9:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Hjdpfxjv Sdc Uo Abgsp

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher Hedpex Iiw Iefx Abgjp x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, overall weight: 29,000 kg, spindle speed (max.): 6,000 rpm, number of axes: 5, This 5-axis HEDELIUS RS 100 K MAGNUM was manufactured in 2009. It features a travel range of 3500 x 1000 x 770 mm and a rotary-tilting table with a 1200 kg max workpiece weight. The spindle operates at speeds up to 6000 rpm, and the machine includes a 50-tool capacity magazine. If you are looking to get high-quality milling capabilities, consider the HEDELIUS RS 100 K MAGNUM machine we have for sale. Contact us for more information. • Rotary-tilting table travel (X/Y/Z): 1000 / 1000 / 770 mm • Distance spindle nose to table: • Fixed table: 120–890 mm • Rotary/tilting table: 175–945 mm • Table surface: • Fixed table: 2100 × 1000 mm • Rotary/tilting table: 1000 × 800 mm • Table height from floor: Hodpfx Abjx D Im Regep • Fixed table: 950 mm • Rotary/tilting table: 895 mm • Max. workpiece weight: • Fixed table: 2000 kg • Rotary/tilting table: 1200 kg • Spindle diameter (front bearing): 90 mm • Tool taper: MAS 403-1982 BT50 • Feed rates (X/Y/Z): 0–30,000 mm/min • Max. feed force: 15,000 N • Tool magazine capacity: 50 tools • Max. tool diameter: 100 mm • Max. drill diameter: 70 mm • Power supply: 40 kVA, 50 Hz

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve Hodpeypb Tpsfx Abgop • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type • Operating Materials: Specific operating fluids/materials included

Condition: ready for operation (used), Year of construction: 2014, operating hours: 24,209 h, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of tools per spindle: 48 • Tool holder: hsk-a 63 • Main spindle max. Torque: 95 nm Hodpfxox D Nl Uo Abgsp Extra Information Machine still under power

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Hedpfoxu N H Hex Abgop

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 630 mm Hsdpfx Aeyfgf Nobgjp Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm MACHINE DETAILS Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis