Feed Mill &Steam system

Year of construction: 2016, condition: good (used), functionality: fully functional, For sale: fully functional hammer crusher by ROBEX - model DPH22KRL, equipped with a belt conveyor. Year of manufacture: 2016. Crusher motor power: 22 kW. Fsdpfx Ajy Rz Rlslwjpg

Year of construction: 2020, condition: used, Bell-Mark Thermal Printer RF Pouch Printer, Type East Print 111 128, Model No. EP41015R, prints full rear bag artwork including barcodes to clear scannable quality. S/No. 20572763 (2020). Country of Origin: U.S.A. Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fpjdpfx Aoy Rzrijlwog

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 0266232, I am selling an automatic metal saw with a feeding device - Type: PEGAS GONDA automatic 230-AFC - Year: 2002 - Serial No.: 0266232 Fpodpfxsy Rzqfs Alweg ACCESSORY: Feeding device for cutting 5 m bars. The saw is fully automatic. The feeding device allows cutting 5 m bars into pieces of any length. For dimensions up to 40 mm, it can also feed two bars simultaneously. The saw is regularly maintained, flawless, and in excellent condition. It is connected to the electrical network and ready to start.

Year of construction: 2022, condition: used, OFFERS CONSIDERED PRIOR TO AUCTION Mini Linear Doypack 210 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, capable of 200g - 1kg Size Pouches, 1000kg in 1 Hour, capable of consistent weights within 2-3 grams depending on the product type. S/No. 22SDM004 (2022). Country of Origin: United Kingdom Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fodsy Rzm Tspfx Alwopg

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: BS 21012, For sale: LASERVALL laser with dividing device and C axis - Type: laservall PH70 - Model: BOX SOL – OWIO 20 EMK - Serial No.: BS 21012 - Year: 2021 Fpodpfey Rzmtsx Alweg - Power: 23W The laser enables marking on all types of metals, plastics, ceramics, glass, and stone. It allows engraving on both flat and round surfaces, as it is equipped with a dividing device featuring a three-jaw chuck and a simultaneously controlled C axis. All electronics, the entire software, as well as the laser tube were replaced in 2021. The machine has been used very little and is practically new. It is connected to the mains and ready to operate.

Year of construction: 2022, condition: used, OFFERS CONSIDERED PRIOR TO AUCTION Mini Linear Doypack 410 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, Capable of 5kg Size Pouches, 600kg in 15 Minutes, capable of consistent weights within 2-3 grams depending on the product type. S/No. 22SDM005 (2022). Country of Origin: United Kingdom Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described Fpsdpfx Aoy Rzlvjlweg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: P240207155, BWU 1100 (2015) BWU 1100 (2017) Maximum air pressure: 600 kPa Euroline – optimized for garbage bag production - Basic converting line for garbage bag manufacturing with non-driven C-folder - Can be configured in-line or off-line – with or without surface unwinder - Flexible unit, easy to operate and maintain - Servomotor drive - Combination of proven FAS converting modules - Double-sided sealing with single sealing bar - Unique tension-free sealing system - Optionally equipped with PP insert and TU220 tape unit Fedpfxey Rzhdj Alwjpg Information sourced from online documentation (also enclosed with this advert) Max. main roll diameter, mm [in]: 800 [31.5] Max. sealed tape width, mm [in]: 1060 [41.7] Bag length, min-max, mm [in]: 600-3000 [23.6-118] Machine speed, m/min [fpm]: 20-100 [65.6-328] C-bend, mm [in]: 220-620 [8.7-24.4] Max. cycles/min: 160 Web rewinding, mm [in]: 100-500 [3.9-19.7] Max. roll changes/min: 8 Max. roll diameter, mm [in]: 200 [7.9] Installed power, kW [A]: 5 [9] Air supply, bar [psi]: 6, 13 l/roller change [87 to 3.7 scfm] L x W x H, mm [in] BWU: 4487 x 2157 x 2356 [177 x 85 x 93] Weight, kg [lbs] BWU: 2540 [6350] * Mechanical. Maximum output speed depends on the material being processed. With TU220 belt unit: max. 6/min. Price per machine. Please note that this description may have been automatically translated. Contact us for further details. The information in this classified ad is for guidance only. We recommend verifying details with the seller prior to purchase.

Year of construction: 2022, condition: used, 10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines. (2022). Country of Origin: United Kingdom Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fpjdpfxey Rzfvj Alweg Offers considered prior to auction

Condition: good (used), Workshop Liquidation / Metalworking Machine Package Description: Industrial workshop equipment from a site closure Location: 44319 Dortmund Type of sale: Pickup from site Special conditions: Individual items may be purchased / Loading available at cost A comprehensive machine package from an industrial metalworking shop is for sale. Included are various machine tools for metalworking tasks such as milling, sawing, drilling, grinding, and general workshop operations. The package is ideally suited for locksmiths, metal construction, toolmaking, maintenance, training, and general workshop use. Included machines / equipment: - FORTE Metal Bandsaw, Type Forte 400 - GILLARDON Column Drilling Machine, Type GB 30 V - Universal Milling Machine / Tool Milling Machine - ELESTA VISULESTA II Digital Readout - Workbenches / Worktables - Workshop Cabinets / Steel Cabinets - Vises and Clamping Tools - Additional workshop accessories as shown in images Technical data according to nameplates / images: FORTE Metal Bandsaw Manufacturer: Maschinenfabrik FORTE GmbH, Winterbach Type: Forte 400 Machine No.: 1848 Three-phase current: 50 Hz Operating voltage: 380 V Control voltage: 220 VAC with transformer Solenoid voltage: 24 VDC Nominal current: 10 A Max. fuse: 20 A Cutting speeds as per nameplate: 40 / 80 m/min 60 / 120 m/min GILLARDON Column Drilling Machine Manufacturer: GILLARDON Type: GB 30 V Speed range: 60 – 1600 RPM Industrial version Universal Milling Machine / Tool Milling Machine Heavy-duty industrial construction Digital positioning readout ELESTA VISULESTA II Machine vice fitted Coolant system available Further technical data – see images Actual technical data, dimensions, and weights may vary. Equipment: - Industrial workshop machines - Heavy cast iron construction - Machine tools for metalworking - Some units with digital readout - Some units with coolant system - Workshop cabinets / steel cabinets - Workbenches / worktables - Vises and accessories Condition: Used machines with age- and usage-related signs of wear. Visual condition as seen in images. Machines come from an operational workshop environment. Function and technical inspection by the buyer recommended. Scope of delivery: Fsdey Rrk Aepfx Alwepg Machine package / workshop equipment as displayed Machine tools, workbenches, cabinets, and accessories Delivery scope strictly as pictured No guarantee for correctness of details. Commercial sale – sold as is without warranty. Subject to changes, prior sale, and errors.

Condition: good (used), NOVOTEST Impulse Test Stand / High-Pressure Test Stand Sale from site! Manufacturer: NOVOTEST / BLUM-NOVOTEST GmbH Type: Impulse Test Stand System No.: 00318 Version: High-pressure impulse test stand with hydraulic supply and test cell For sale is a used NOVOTEST impulse test stand suitable for industrial applications, test engineering, hydraulics, research, development, and quality assurance. The system was used for dynamic internal pressure testing of hoses, pipelines, fittings, and containers, and features computer-controlled test sequence management. Technical data: Max. operating pressure: 1,500 bar Test medium: Mineral oil / various testing media possible Frequency: 50 Hz Rated power: 135 kVA Operating voltage: 3 x 500 V PEN Control voltage: 230 V~ / 24 V- Pre-fusing: min. 160 A / max. 200 A Impulse volume at 1,500 bar: max. 140 cm³ Impulse volume at 1,000 bar: max. 210 cm³ Additional pressure stage: max. 340 cm³ Maximum test frequency: 1.7 Hz Test fluid temperature: up to max. 160 °C Temperature control accuracy: ± 3 °C Total weight according to nameplate: approx. 6,000 kg Equipment: - Complete industrial impulse test stand - Enclosed test chamber / test cell - Hydraulic power supply - Specimen supply system - Power section - Test cabinet - Operator cabinet - PC-based control system - Pressure and displacement transducers - Temperature control - Flushing system for test media - Safety monitoring / emergency stop - Technical documentation available Hydraulic power unit: - BOSCH hydraulic power unit - Output: 55 kW - Voltage: 500 V / 50 Hz Fpsdey Rp R Topfx Alweg - Tank volume: approx. 840 l - Max. operating pressure: approx. 280 / 315 bar Suitable for: - Pressure impulse testing - Hydraulic testing - Burst testing - Hose testing - Component testing Condition: Used system with age and usage-related wear. Visual condition as per photos. The unit comes from industrial use. Scope of delivery: - NOVOTEST impulse test stand - Test cell / test chamber - Hydraulic power unit - Control and operator cabinet - PC / monitor / operator unit - Drawer cabinet with accessories - Technical documentation / folders - Scope of delivery as depicted Commercial sale – sale without warranty. Subject to changes and errors.

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Fpjdpfxoy Rflyj Alweg Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, machine/vehicle number: Model TS170, power: 50 kW (67.98 HP), input voltage: 240 V, heating capacity: 50 kW (67.98 HP), L.B. WHITE PREMIER 170 INDUSTRIAL HEATER – INDIRECT FIRED – 49kW L.B. White Premier 170 industrial heater (Model TS170). High-output indirect-fired unit producing clean, dry heated air – ideal for construction sites, workshops, drying, or temporary heating. Specs: Approx. 50kW output (170,000 BTU) Propane gas 240V single phase High airflow unit (industrial capacity) Condition: Good used condition Sold as seen Uses: Site heating Drying plaster / concrete Warehouse heating Marquees / temporary structures Fpedpfey Rfd Nox Alwog Message for more details or video of it running.

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Fpodpfx Ajy N Tbmjlweg Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: ready for operation (used), Electrician workbench ESD workstation - Dimensions: 2100/900/780 mm - Conductive worktop with Anka-Plast coating - Suitable for workplaces where electrostatically sensitive components and modules are handled Fodpfoy N Sgzex Alwepg - Discharge resistance: according to DIN 51953 Self-collection in Eindhoven / 23 units available from June

Year of construction: 2018, condition: ready for operation (used), 28mm alaska cap moulds 32 cavity husky system hot runner for sale Fodpfxey N Rnwo Alwopg

Condition: used, Year of construction: 2016, operating hours: 10,000 h, machine/vehicle number: 978002, input voltage: 230 V, total width: 580 mm, total length: 580 mm, total height: 2,600 mm, noise level: 72 dB, space requirement height: 900 mm, suction capacity: 1,600 m³/h, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, input current: 7 A, We offer this used TEKA Filtoo welding fume extraction unit, year of manufacture 2016. Item number: 978002 Power: 1.1 kW Voltage: 230 V Frequency: 50 Hz Current: 7.0 A Serial number: P26012210011016 Year of manufacture: 2016 If you have any questions or require further information, please do not hesitate to send us a message or give us a call. Fodpfxey N I Rve Alwopg

Condition: used, Year of construction: 1987, functionality: fully functional, feed length X-axis: 218 mm, feed length Y-axis: 218 mm, feed length Z-axis: 116 mm, For sale: fully functional CNC wire cutting machine for foam, Italian brand DB. Table size: 218cm x 218cm, maximum block height: 116cm. Fpsdpfx Aey N A Rwolwsg

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Fedpfx Ajy Naf Eelwspg Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: used, functionality: unexamined, Year of construction: 2014, STM Waterjet PremiumCut 2060 Fpsdpfx Ajy Ixglolwsg 5 Heads for pure water cutting Cutting Area 6000x2000 mm (Double Table System) BFT High Pressure Pumpe Hytron 40.37 (60.000 hours needs to be overhauled)

Year of construction: 2011, condition: used, Year of manufacture: May 2011 Serial number: L177B31996J Fedpfx Asy Iv H Nolwspg VERY NICE FORKLIFT HYSTER 2.5 TONS | 12457 HOURS.

Condition: used, Year of construction: 2004, functionality: fully functional, Grape fermenter with a capacity of 15 cubic meters (15 000 liters), in very good condition. It has a water jacket and an agitator with an electric motor. There are 4 units available, the price is for one piece. If you purchase more than one unit, price can be negotiated. TECHNICAL DATA: Volume: 15 m³ (15000 liters); Type: Vertical; Material: Stainless steel, food grade; Diameter: 3100 mm; Height of the body with legs: 5000 mm; Year of production: 2004; Manufacturer: PIM-Haskovo With electric motor and agitator, Power: 4.1 kW, Electrical supply: 380/220V, 50Hz, IP54 protection Built-in thermostat and temperature control panel with a water jacket. Fsdpfoy It Ukex Alwopg

Condition: good (used), Year of construction: 2021, With patented MULTIFORCE end-lift system! The punching press automatically adjusts the cutting force to the size of the punching tool. It does not matter how resistant or thick the material to be cut is. Cutting table: 1,000 x 500 mm Arm reach: 370 mm Maximum cutting power: 25 t – 245 kN Dimensions: 1,000 x 1,140 x 1,710 mm Net weight (with oil): 1,020 kg Fodpfsy Inwysx Alwepg

Condition: new, Hensoldt Wetzlar ZKG 7x35 Bundeswehr optical set + Fpjdpfey Il Ivox Alweg

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 Fpjdpfx Aey Ilvgjlwjg • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Year of construction: 2026, condition: new, functionality: fully functional, Maxpac currently has a container tilter in stock. The first photos show the actual machine; the last two are examples. Faster loading and unloading with minimal product loss Deliver your bulk products to the packaging line in a sustainable way The container tilt machine, or container tipper, is a simple yet robust system that enables faster loading and unloading of containers with minimal spillage. As a result, it forms a valuable addition to the packaging process. The optimized workflow from start to finish not only leads to increased productivity, but also ensures higher quality of all packaged products. The machine is PLC-controlled, allowing for even distribution of bulk materials with a continuous and consistent feed to the packaging line. This improved productivity also results in uniform product packaging and significantly reduces wastage. It reduces waiting times for emptying containers, ensuring packaging operations can continue seamlessly. Consequently, demurrage and detention costs decrease drastically. The risk of worker injuries is also minimized, resulting in positive impacts on several HR-related costs. The container tilting machine is adaptable to various container sizes and types, making it suitable for a broad range of packaging requirements. This allows for efficient processing and packaging of different types of bulk materials. Fpedpfxey Ick Us Alwjg A top recommendation for businesses seeking to achieve significant profitability gains.