AJB Machines Services

Condition: used, Year of construction: 2022, Champion FM45RS Compressor Model FM45RS. S/No. BA57414001 (2022) Dodpfx Ajyhdmcobuocc Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centre distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Centre height over bed: 140 mm Centre height over cross slide: 80 mm Spindle bore: 36 mm Feed: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Mains connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX size A quick-change toolpost with 3 interchangeable holders - revolving centre - emergency stop - folding chuck guard - coolant system - very low operating hours Space requirements L x W x H: 1900 x 700 x 1300 mm Weight: 600 kg Very good condition Dcedpfx Aoyg Rfiobusc

Condition: good (used), Stock number: 3074 Brand: Weiler Year of manufacture: Type/Model: LZD 220 Machine number: Control: conventional Centre distance: 400 mm Spindle bore: 23 mm Centre height: 110 mm Dcjdpfx Aoyg N E Usbusc Swing diameter over bed: 220 mm over cross slide: mm Speed range: 50 to 2,000 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Connected load: 0.4 kW Accessories/Equipment: quick-change tool post Condition: good Weight: 280 kg Dimensions: 1,100 x 600 x 1,200 mm

Condition: good (used), Year of construction: 1989, Lathe is in good condition, 1 meter between centers, 210 mm center height. Original paint, little used! Multifix B, various holders included. + 1 box with turning tools. Dodpfx Abjygbcreuecc

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Weiler Praktikant VC Precision Centre Lathe Year of Construction 1999, 3-Axis Siemens Digital Display with AC Drive, Infinitely Variable Spindle Speed, CE Compliant!!!! Technical Data: - Year of manufacture: 1999, Machine No. 82 - Centre height: 160 mm - Distance between centres: 650 mm - Spindle speeds: up to 4000 rpm, infinitely variable - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse Taper MK 3 - Feed rates: 0.02 to 0.63 mm/rev - Cutting threads: Metric, Inch, Module and Diametral Pitch - Metric thread pitches: 0.25 to 8 mm - Weight: approx. 920 kg - Spindle brake, switchable - Machine dimensions approx.: 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and Features: - 3-axis Siemens digital readout - Quick collet chucking device for collets from 2 to 29 mm, in 1 mm increments - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix size A with 3 tool holders - Electronic chip guard - Change gears - Machine feet - Splash guard Dcsdpfx Abjyapwdsujc About the Machine: Offered for sale is a Weiler Praktikant VC lead and feedscrew lathe from year of manufacture 1999, in very good condition. The control system, in combination with the precision centre lathe from Weiler, provides the following functions: graphical display of travel distance and direction, graphical representation of the scale system on the lathe, compensation for tool offset, zero point shifting for workpiece position compensation, radius/diameter switching, graphical display of the main spindle rotation, graphical display of the machine’s speed potentiometer position. A very fine lathe featuring an AC drive with infinitely variable spindle speed. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and is capable of producing surface finishes comparable to grinding. The digital readout makes operation even easier and more precise. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Djdpoyalurofx Abuscc Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: like new (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 1603471, Weiler Praktikant GS 160 toolroom lathe in excellent condition with tooling. YOC 1993. Specifications: * Machine No. 1603471 * Peak height 160 mm * width 650 mm * Speed: 48 / 2500 U / min * spindle brake switchable * spindle bore 40 mm * spindle nose DIN 55027 5 Dcsdpfxoyahqis Abuec * tailstock MK 3 * feeds from 0.02 to 0.63 mm / rev * Possible thread Metric, inch, module and diametric pitch * metric thread pitches from 0.25 to 8 mm * Weight app. 700 kg Assecoiries: * Heidenhain 3 axis digital readout * Collets 11 pc * Drawbar for collets * 3 jaw chuck steel with 2 sets of jaws * 4 jaw chuck * Mulifix A with 4 toolholders * Bedstop * Fixed center * change gearwheels * machine feet * machine book in German. To machine: Offered Weiler Praktikant 160B is in excellent condition. The machine is fully functional with many accessories. All guides have been dismantled, checked and are in top condition. All guides run smoothly and evenly. The machine runs smoothly at all speeds. Oil change carried out. Mechanically and electrically controlled. Take the opportunity to view this machine under power on site and convince yourself of the excellent condition of this machine.

Condition: good (used), Scope as per images Continuously variable speed from 15 to 3,000 rpm Dedpfxox U D D As Abuecc Drive 2.2 kW

Condition: like new (used), Myford 254s Single Phase 220v Lathe Excellent condition like brand new hardly used Distance between centres 22" 10" swing Imperial machine Spindle speeds 53-2000rpm Tail stock morse taper 2 Fixed and travelling steady 6" 4 Jaw chuck 5" 3 jaw chuck Dsdpfx Abex Utymouocc 11" Faceplate Single phase 230v

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate Djdpfxox Utc Ij Abuscc 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.

Condition: excellent (used), functionality: fully functional, center height: 210 mm, GRAZIANO SAG 210 LATHE 1500 X 210 AP UNDER BLOCK 280×200 MM FOR 80 MM EQUIPPED WITH DIGITAL READOUT USED MACHINE Dcsdpfx Asx Tt T Djbuoc INTERNAL CODE: CAR 29

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Dsdpfx Abox Rrpfjuscc Spindle mount: Camlock Toolholder type: Drehblitz Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Digital readout: Yes, 2 axes

Condition: good (used), WEILER MATADOR Lead and feed screw lathe from training workshop - Centre height: 140mm - Swing diameter over cross slide: 155mm - Distance between centres: 500mm - Spindle bore: 36mm - Speed range: 20–3500 rpm - Automatic longitudinal / cross feeds - Tailstock: MT 3 Djdpfx Aex Rql Ssbujcc - Power requirement: 3 kW - Three-jaw chuck incl. reversible jaws - Collet setup incl. collets - Multifix tool post + holders - Electric chuck guard - Chip guard at rear - Emergency stop / off - Work lamp - Documentation Dimensions: LxWxH 1.6x0.7x1.6 metres / Weight 750kg Subject to errors and input mistakes

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Dcsdpfx Ajx N A N Hebusc Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck

Condition: used, Year of construction: 2005, Turning length 900 mm Distance between spindles 580 mm Max turning dia. 250 mm Spindle speeds (main spindle) 30-6000 rpm Spindle speeds (Sub spindle) 30-6000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Upper turret w/12 stations Dcjdpfx Ajx N A Ntsbusc Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles Chip conveyor Irco Profimat magazine bar feeder

Condition: used, Year of construction: 2006, Turning length 900 mm Distance between spindles 580 mm Max turning dia. 250 mm Dedpfx Ajx N A Hlebuocc Spindle speeds (main spindle) 30-6000 rpm Spindle speeds (Sub spindle) 30-6000 rpm Spindle speeds on live tools 2000 rpm Spindle bore 65 mm Y-axis 670 mm Upper turret w/12 stations Lower turret w/12 stations Live tooling on both turrets - in all stations Controlled tail stock Automatic workpiece extraction Control: Siemens Sinumeric 840 D Equipped with: Hainbuch collet chuck on both spindles 2 pcs. 3-jaw chucks Chip conveyor Irco Profimat magazine bar feeder

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Model: Primus VCD Precision Lathe Year of manufacture: 2017 Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Scope of delivery: - Documentation Dedpex Nkdxefx Abuocc

Condition: good (used), Emco Compact 10 Lathe Made in Austria. The machine is in perfect condition, practically unused. The machine comes from a maintenance workshop at a printing house. It has not been used in production. Accessories are included. Dedpfx Asx Ncucjbujcc

Condition: used, Year of construction: 1962, functionality: fully functional, center height: 205 mm, center width: 1,200 mm, bed width: 320 mm, overall weight: 1,200 kg, Leadscrew and feedscrew lathe Meuser M0L - Year of manufacture: 1962 - Fully functional, connected, ready for demonstration - Centre height: 205 mm - Centre distance: 1200 mm - Spindle bore: 47 mm - Spindle speeds: 28 - 1250 rpm - Bed width: 320 mm - Total power requirement: 5.5 kW - Machine dimensions LxWxH: approx. 2.30x1.10x1.25 m - Weight: approx. 1200 kg - Extensive accessories (see photos) - Serial no.: M0L - 30158 Dcjdpsx Ihanefx Abusc

Condition: good (used), functionality: fully functional, Used EMCO EMCOMAT 14D lathe in good condition Toolmaker's precision Travel in X/Z: 135 / 590 mm Distance between centers: 650 mm Center height: 140 mm Infinitely variable speed control Constant cutting speed MAIN SPINDLE Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Guideways hardened and ground 3-point mounting of the machine bed Diagonally ribbed, induction-hardened machine bed Rigid, split leadscrew cover Electromechanical spindle brake Chuck guard The machine is equipped with the following options: Quick-change tool holder EMCO 3-AXIS POSITION DISPLAY (TURNING) Chip protection door Machine lamp Coolant device Tool drawer Current new price: approx. €32,130 gross, plus the listed options Dcsdpfx Asx Emp Asbuoc Can be demonstrated and tested under power. Free loading by forklift or crane.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws Dcodpfex Eb A Usx Abuec >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, quill stroke: 120 mm, quill diameter: 75 mm, total length: 1,000 mm, total width: 850 mm, total height: 1,900 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, spindle mount: MK 3, drilling capacity: 32 mm, nominal power: 0.75 kW (1.02 HP), table length: 730 mm, table width: 210 mm, throat depth: 270 mm, Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 32 mm, motor 0,75, cross table size 730x210 mm, spindle speed 50-2500 rpm, MT-3, tapping device, machine lamp, coolant device, tapping device, dimensions 100x850x1900 mm, weight ca. 400 kg Dedpfx Aox Ebi Ijbuscc

Condition: good (used), Leadscrew and feedscrew lathe type Celtic 12 Centre height: 160 mm Centre distance: 500 mm Spindle speeds: 35 - 1560 rpm Multifix tool holder A Lathe chuck Live centre Dcedox Dy U Tspfx Abujc

Condition: used, Year of construction: 1997, total length: 1,500 mm, total width: 800 mm, total height: 1,500 mm, Empty weight: 700 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1101050 - Drive system: Conventional - Power [kW]: 4.2 - Centre height [mm]: 125 - Swing over bed [mm]: 250 - Carriage turning diameter [mm]: 160 - Distance between centres [mm]: 500 - Bed width [mm]: 160 - Spindle bore [mm]: 38 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 1500mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dodox Dyquspfx Abuscc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Schaublin lathe type 125B in very neat condition. Specifications: - Swing over bed: 270mm - Distance between centers: 500mm - Spindle speed: 40–3000 rpm Accessories: - Heidenhain digital readout ND780 on 2 axes - Multifix toolholder with 6 holders - 3-jaw self-centering chuck with inside and outside jaws - Set of change gears - 2 x drill chuck - Live center Dcodpfx Aex Auv Aebujc - Machine feet - Drive flange - Set of collets with drawbar - Machine lighting