Condition: good (used), Year of construction: 2008, operating hours: 7,932 h, General information Field of application: Construction Serial number: 108T11701-1 Drivetrain Drive: Track Lelev R Eiyohccqleri Make of engine: C7 Weights Empty weight: 15.100 kg Condition Technical condition: good Visual appearance: good Other information Machinetype: Top hammer Emission level: Stage IIIA / Tier III Delivery terms: EXW Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: as good as new (ex-display), Year of construction: 2021, Epiroc Boltec EC, Fully mechanized rock bolting rig (Unused 2021) suitable for installation of a range of bolt types from 2.4 to 6 meters in length. Developed for medium to large sized tunnel profiles, it can install bolts in roof heights up to 13 meters. Optimized bolting unit with reduced feed length which gives potential for reduced drive sizes whilst retaining the same bolt lengths used previously Rock drills optimized for bolt hole drilling with the options of COP RR11 and COP RR14 Automated bolting tool retraction and indexing over to drilling mode at completion of bolting Loading : Note to assist buyers the seller will Load to suitable flat bed road transport - see additional information in removal instructions below Lrelhcceviu Hfsqloi

Condition: used, Year of construction: 2014, Field of application: Construction Serial number: 11-xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17779 Lrjlhcovg Nblocqloi Specifications AMV: - 2014 model - Not certified - Engine hours: 2097 h - Transmission hours: 612 hours - Compressor hours: 10999 hours - Pump hours: pump V: 10840t- Pump S: 11232t- Pump H 10736t - Percussion hours: stroke v: 3923t-stroke s: 3811t- stroke H 3770t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery.

Condition: used, Year of construction: 2006, Manufacturer: TAMROCK Year of manufacture: 2006 Type: Pantera 1100 Operating hours: approx. 6,200 h Lrjljv S Ebrehccqlsi Weight: approx. 19,200 kg Includes one drill rod

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 - Delmag - SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill with 5834 hours . Our expert inspector checked 65 inspection points - 65 were approved, 0 showed imperfections, 0 presented issues. Buy it now for EUR 220.000 or make us an offer. We can deliver from Uelzen, Germany to your destination. You can estimate the cost using our price calculator. Inspector comment: Machine for concrete pile drilling, soil improvement, and vibro-compaction. Carrier unit Sennebogen SR25BT (year of manufacture 2008) with drill attachment Delmag RH18 (year of manufacture 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Pulling winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT AVAILABLE, PURELY SOIL IMPROVEMENT MACHINE, drilling gear MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, alignment automation. Hydraulic telescopic chassis with a width of 3.0m to 4.40m. The CAT C9 engine was overhauled in 2015 at BH 3,304 by CAT. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m³/h), feeding screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of operating hours. At the time of inspection in 2023, it was operational and tested but not under load. After repairs of some electronical issues from the long time it has been out of operation and a regular maintenance the machine will be ready for use. - Year: 2008 - Weight: 52500kg - Serial Number: 525.6.312 und 974 - Sold from: Uelzen, Germany Contact us for more information and a FULL INSPECTION REPORT with detailed pictures, a video and the final price including delivery to your country. Buying with Equippo is easy: * Fully inspected machines * Delivered to your jobsite * Money Back Guaranteed * Safe payment methods with possibility to pay at delivery Do you have machines to sell? Contact us! Lrjlhcsm Dqxpocqlsi Questions? Our sales agents are ready to help Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

Condition: used, Year of construction: 2008, WEKA DK 22 core drilling machine, year of manufacture: 2008, serial number: 1008880, with water connection, up to 250 mm The listed price is the starting price of the auction. Please follow the link to see the current bid and participate in the auction. Lelhev Ni Taeccqlsri

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2019, Equipment: UVV, Here we are selling a drilling rig from the EPIROC brand. EPIROC SpeedROC 3F - Drilling rig for the natural stone industry - With the three drilling heads, the SpeedROC 3F is an efficient and productive drilling rig for drilling granite, limestone, marble and sandstone Main application area: Stone industry Drilling method: External hammer Ljlhsv Edkroccqlori Rock drill/DTH hammer size: COP DS5 Hole diameter: 28 mm - 45 mm Maximum hole depth: 9 m Engine: 139 kW Cabin: Yes Air capacity (FAD): 42.5 l/s Pressure: 8 bar - Carrier device is a DOOSAN DX 210 W This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref. No.: 20 If you have any further questions, please call us or send us an email. You can find more interesting offers on our homepage! Many machines and parts available. ----- Here we sell an EPIROC drilling rig. EPIROC SpeedROC 3F - Drilling rig for the natural stone industry - With the three drill heads, the SpeedROC 3F is an efficient and productive drilling rig for drilling granite, limestone, marble and sandstone Main application area: stone industry Drilling method: external hammer Rock drill/DTH hammer size: COP DS5 Hole diameter: 28mm - 45mm Maximum hole depth: 9 m Engine: 139 kW Cabin: Yes Air capacity (FAD): 42.5 l/s Pressure: 8 bar - Carrier device is a DOOSAN DX 210 W This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref. No.: 20 If you have any further questions, please call us or write us an email. You can find more interesting offers on our homepage! Many machines and parts available.

Condition: like new (used), Functionality: fully functional, power: 44 kW (59.82 HP), fuel type: diesel, fuel consumption per hour: 15 l/h, color: yellow, overall weight: 3,500 kg, operation weight: 3,500 kg, maximum load weight: 3,500 kg, lifting height: 5,000 mm, first registration: 04/2021, next inspection (TÜV): 12/2025, Year of construction: 2021, operating hours: 100 h, machine/vehicle number: SF2021018, Equipment: hydraulics, trailer coupling, For sale : 1 well drilling rig ZZ Defy DFQ-150 W BJ 04/21 on fully functional trailer (TÜV until 12/2025) Trailer type: Stema AFFD ST02-2 permissible total weight 3500 kg Ident. no. SF 2021018 (100 operating hours) Drilling diameter up to 300 mm (depending on the performance of the centrifugal pump) Lelhccjuqux Heqlori Contact pressure up to 5 t Pulling force up to 10 t Rotational speed KDK 120 rpm/85 rpm Torque KDK 1800 Nm right/2000 Nm left Accessories : Drill rods 150m 76mm OD (75*2m) with 2 stepped bits Piston pump ZR 180 (gasoline driven) approx. 160l/min 2 down-the-hole hammers AD 160mm

Condition: used, Year of construction: 2015, Field of application: Construction Serial number: 11-1xxxx Lelhcovg Rcdocqleri Please contact ATS Norway AS for more information Please provide reference number upon request: 17783 Specifications AMV: - 2015 model - Not certified - Engine hours: 2297 hours - Transmission hours: 688 hours - compressor hours: 8056 hours - Pump hours: pump V: 8878t- Pump S: 9170t- Pump H 8788t - Percussion hours: stroke v: 2950t-stroke s: 3142t- stroke H 2984t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery

Condition: used, Functionality: fully functional, fuel type: diesel, color: red, overall weight: 5,000 kg, Year of construction: 2019, We are selling our Bohak well drilling machine. The machine was only used for private drilling and has therefore only had a few working hours since its purchase in 2022. The detailed description can be found on the last page of the pictures, as it is very comprehensive. The drill rods include 33 rods of 3 meters each. The drill heads are listed in the description on the last picture. Lrolhev I S Epoccqlsi Everything you need for drilling is included, so you can get started right away. The machine is functional and can be inspected on site. Detailed instructions and circuit diagrams are available upon request. Additional pictures are also available upon request. We purchased the machine used and overhauled directly from the manufacturer in 2022. The original invoice is available for inspection. The price is net, VAT is not included. The machine is located in Worms-Rheindürkheim. Please feel free to inquire by phone. Warranty and guarantee excluded

Condition: used, Functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA Lrolev Nhyfjhccqlji - 6 cylinders - Machine weight: 17.5 tons - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Condition: used, Year of construction: 2011, CARDI T3 250 EL core drilling machine, year of manufacture: 2011, S/N: 1177785, with water connection, up to 250 mm The listed price is the starting price of the auction. Please follow the link to see the current bid and participate in the auction. Ljlhccqsv Ni Ahsljri

Condition: used, Year of construction: 2007, operating hours: 4,500 h, Field of application: Construction Please contact Martin Gervink for more information Ljlhjv Am S Tjccqleri

Condition: used, Year of construction: 2010, operating hours: 13,808 h, Equipment: air conditioning, General information Field of application: Construction Serial number: F056742 Ljlhccovtwmveqljri Drivetrain Drive: Track Make of engine: C18 Weights Empty weight: 77.200 kg Other information EPA Marked: yes EPA Marked: yes Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 20,8x3x3,6 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2007, Field of application: Construction Please contact ATS Norway AS for more information Lslhovyf Nljccqleri Please provide reference number upon request: 19692 Specifications: - Model year: 2007 - Engine hours: 6060 hours - Hammer hours: 2496 hours - Weight: 14,900 kg - Machine width: 241 cm - Belt width: 30 cm - Central lubrication - Straight grinder - Chassis (see pictures) - Compressor - Wear parts included - Hammer has been repacked every 400 hours - The engine has had an oil change and filter change every 250 hours - Carousel - Radio control - Winkelm gauge - Meter gauge - Diesel heater - Ready for delivery Description: We have for sale a 2007 Atlas Copco D7 Drilling Rig , which has been well maintained and is in working order. The machine comes with a significant stock of wear parts and filters, and the owner has carried out regular oil changes on the engine every 250 hours and on the hammer every 400 hours. The rig is a bit slow to start, but the owner lets it run with the diesel heater for 15-20 minutes before starting, and then it starts easily. The idler wheel on the left side is a bit worn and needs to be replaced, and there is also a need to replace some hoses on the vacuum cleaner. The rig is from 2007, so some errors and defects may occur, and some expense will be required to get it back in top condition. However, it is ready for delivery and use. Total Weight: 14900 Width: 241

Condition: good (used), core drill, crown drill, stone drill, core drilling machine, diamond core bit, core bit -Core drill: Ø 150 mm -Drill length: 470 mm quick-change mount -Weight: 5 kg Lrjlhcsb A Sm Aocqlsi

Condition: used, Year of construction: 2012, operating hours: 6,006 h, Equipment: all wheel drive, TM Bohrtechnik TMB 25 drill rig, year of manufacture: 2012, operating hours compressor: 6,006h, operating hours diesel engine: 8,718h, 6x drill rods, drill head, dust collector, ready for immediate use, good condition, German machine, On request, we can make you a leasing or financing offer from Mercedes-Benz Bank, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! Ljlhccsrrbm Roqleri _____ TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, working hours kompressor: only 6.006h, working hours diesel engine: 8.718h, 6x drilling pipe, drlling head, dust collector, ready for work, good condition, german machine, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Condition: repair required (used), Functionality: limited functionality, power: 305 kW (414.68 HP), overall weight: 22,000 kg, Year of construction: 1976, operating hours: 24,097 h, AGBO G750 on Magirus Deutz 310 D26 6x6 - built in 1979 - engine and drilling rig functional. Ljlhcjv A Ukqjcqlori Price negotiable 75,000 EUR net ex works from the location in Zusmarshausen. The equipment can be inspected at any time by appointment.

Year of construction: 2006, Condition: ready for operation (used), Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible. Lrsljtufbrehccqloi

Condition: used, Year of construction: 2013, operating hours: 7,368 h, Equipment: air conditioning, General information Field of application: Construction Serial number: F095088 Drivetrain Drive: Track Make of engine: C15 Weights Empty weight: 62.000 kg Other information EPA Marked: yes EPA Marked: yes Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 18,105x3,4x3,5 Lrelhccqjvtwmpeloi Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2004, operating hours: 10,000 h, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 15082 Lrelevg Nt Iehccqlei Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000

Condition: good (used), Core bit, step chisel, core bit for well construction, core drill, core drilling machine, diamond core bit, core bit for well drilling machine -Drill bit: 3 pieces drill holder plus 1 piece extension adapter Lrslhccevmyrujqlei -Dimensions: see photos -Delivery/Price: complete -Transport dimensions: 250/250/H280 mm -Weight: 27.3 kg

Condition: used, Year of construction: 2010, operating hours: 2,900 h, Field of application: Construction Serial number: 110M153xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19576 Specifications: - 2010 model - Hours: Approx. 2900 - Weight: 5200 kg - 62 kW - Tires (see pictures) - Winch - Radio control Lroljvyf I Iehccqlji - Ready for delivery Description: Sandvik DC300R Drilling rig from 2010. Owner says he recently had it serviced. Ready for delivery. Hours: 2900 Total Weight: 5200 Kw: 62

Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 18753 Description: Slightly used skewer. Fits a Soosan 540 hydraulic hammer. Ready for delivery. Lolhccjvgz T Hjqlsri

Condition: used, Year of construction: 2016, Field of application: Construction Serial number: 22xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18752 Ljlovgyupshccqleri Description: 2016 Atlas RH 658L drilling machine Good condition. Equipped with Th ndtak. Ready for delivery.