Used Edt for sale (294)

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm Ppjdpfx Acjy Ifdkerer equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements The main spindle box was completely overhauled approx. 10 years ago. The vibration-damping elements are included in the scope of delivery. The machine is from the original owner.

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Ppedpfx Aey Ehntscrer

Condition: used, Year of construction: 2023, Book‑Edge Printer / Printer with Book Transport System Application: Printing on book edges (1–3 sides) with colors, patterns, designs, motifs, and photos; full‑bleed edge printing with overprint and wiper/blade system. Applications / Use Cases: Hardcover books, softcover books, book blocks with flat or rounded spines, calendars, special and limited editions. Performance Output: approx. 300 books/hour (with 3‑side printing) Print speed: 160 mm/s Book / Block Dimensions Block width: 100–330 mm Podpey Hryisfx Acrepr Block height: 100–330 mm Block thickness: 5–210 mm Printing Technology Technology: High‑resolution inkjet printing Resolution: 1200 × 1200 dpi Color system: CMYK Ink type: Water‑based pigment ink Machine Dimensions & Weight Dimensions (W × D × H): approx. 142 × 80 × 105 cm Weight: approx. 100 kg

Year of construction: 1999, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 with a large number of type wheels, e.g: 563 / 610 697 - 2DP. / 635 564 / 667 610 / 16.. / 634 631 / 169 / 4,3 562 / 697 Pjdpswvtqnjfx Acrspr 632 / 697 561 / 695 691-24P / 633 564 / 667 610-16P / 634 631 / 691 / 4,3 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: used, functionality: unexamined, Used case-making machine from bookbindery closure Ppjdpsx Dtavofx Acrer

Condition: used, Year of construction: 1972, spindle bore: 65 mm, center height: 175 mm, This offer concerns the Heylingensteadt Model 315 EV with digital display. The machine comes from tool manufacturing and has had only a few operating hours, thus it is in good condition. Pedpfoyhwyyex Acrjpr Due to company closure, I am selling various lathes, milling machines with extensive accessories, as well as a welding machine. If interested, please get in touch.

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ppjdpfx Ajxcbkmocror #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ppsdpfx Acexcbktsrjr #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Pjdpfswfqvmsx Acrjpr

Condition: like new (used), Unused steady rest with rollers and spare quill from a HEYLIGENSTAEDT CNC slant bed lathe Centre height: 500 mm Internal diameter: 600 mm Base plate: 320 x 540 mm Weight: approx. 200 kg Ppsdpfxjw Sgw Eo Acrjr Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, Ppodpfxoxwp Eho Acrsr faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Podpjx A Hggofx Acrepr Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Ppjdpfx Aeyw Ivhscrsr Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Year of construction: 1958, condition: used, machine/vehicle number: 58/803 0021, height of centers: ueber Oberbett 300 mm center distance: 1500 mm max. circulation-Ø over bed: ueber Oberbett 640 mm spindle boring: 67 mm spindle retainer: Gr. 8 Pjdpfx Ace Uin Uerspr retainer taper tailstock: 5 MK spindle speed: 18 - 900 rpm forwarding feed: laengs/plan 0,063-2/0,032-1 mm/U thread pitch: 0,5 - 14 mm electrical connection: 380 V, ca. 7,5 kW space needed: 1550 x 3100 x 1250 mm weight: ca. 3500 kg

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module Ppsdpfx Aexpuu Escrer 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Year of construction: 1965, condition: good (used), machine/vehicle number: 189.746, height of centers: 315 mm center distance: 1000 mm max. circulation-Ø over bed: 630 mm spindle boring: 74 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 7 - 710 rpm forwarding feed: längs/plan 0,063-4/0,030-2 mm/U thread pitch: 1 - 14 mm electrical connection: 380 V kW Podpfei D D Nqsx Acrspr space needed: 2750 x 1250 x 1380 mm weight: ca. 4200 kg

Condition: good (used), Schmedt PräLeg HHS 1805 Case in machine This machine is in very good condition. Manufactured by Schmedt, Germany. The machine suspends book blocks into pre-cut hardcovers. Two gluers with smooth glue thickness adjustment. Ppodpsy Hglgjfx Acrjr The machine comes with full documentation and a CE certificate. Format: Block height: 80–340 mm Block width: 110–450 mm Block thickness: 2–80 mm Capacity: approximately 200–300 pcs/h Power supply: 230V + compressed air. Weight: 300 kg

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Ppjdpfx Acey Ehm Norsr Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Pjdpfx Asy Ehmpecrepr Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air.

Condition: good (used), Year of construction: 1999, functionality: unexamined, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 2,050 mm, total length: 13,000 mm, table length: 5,000 mm, table width: 3,000 mm, total width: 8,000 mm, spindle speed (min.): 12,000 rpm, total height: 6,000 mm, table load: 50,000 kg, overall weight: 120,000 kg, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HEYLIGENSTAEDT HEYMUNILL 3200-P heavy-duty portal-type machining center with fixed cross beam, designed for processing large and heavy workpieces. Large working area with travel distances of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, table size approximately 5,000 x 3,000 mm, and table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A and B axes (swivel axes in the milling head) C axis (360° rotation) Simultaneous 5-axis machining possible (with fork milling head) Milling heads: Straight milling head FK 120/340 90° angular milling head WFK 100/750M Fork milling head FK 100/2D Milling head magazine: 5 positions automatic milling head changer Additional equipment: ICS approx. 7 bar 32-position tool changer (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool length measuring system (laser) Chip conveyor Ppsdpfx Acoy Anrterjr Coolant system Adaptive feed control Heidenhain linear measurement systems X/Y/Z

Condition: good (used), Year of construction: 1968, functionality: unexamined, turning diameter: 1,500 mm, For sale: 1 used head lathe / facing lathe Ppsdpfor Nzm Tjx Acrsr Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik type: 505ev/500 YEAR OF MANUFACTURE: 1968 Diameter face plate: 1.500mm incl. documentation The machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2021, Format: 0x0 Podpfxsyxqw Ro Acrjpr Equipment: Mechanical speed: 300 cycles/hour

Condition: used, Year of construction: 2016, Format: 0x0 Equipment: Ppodpfxjyxqw De Acrjr Maximum mechanical speed: 250 pieces/hour

Condition: used, Year of construction: 2021, Format: 0x0 Psdpsyxqwwsfx Acrspr Equipment: Mechanical speed: 250 pieces/hour

Condition: used, Year of construction: 2016, Format: 0x0 Ppodpfjyxqwkjx Acrjr Equipment: Mechanical speed: 250 pieces/hour