Faria e Peres Lda

Condition: good (used), Year of construction: 1999, functionality: fully functional, Vertical machining center Manufacturer: Johnford / Matra Model: FMC 850 Year of manufacture: 1999 Hours: see image - 24-tool changer with double gripper - Table size: 1000x500mm - Spindle speed: 8,000 rpm - Travel: 800x450mm - Fanuc Oi control system Dkjdpfx Aozkg Uyokijp - Machine is in working order and can be inspected while running.

Condition: good (used), Year of construction: 2000, Vertical machining center Machine type: Hartford HB-120 W Control: Mitsubishi Meldas control ( G-code programmable) Year: 2000 SPECIFICATIONS Travel X-Axis: 2.000 mm Dksdpjzkbt Refx Akiop Y-Axis: 1.200 mm Z-Axis: 500 mm Spindle speeds: 50 - 4.000 rpm Spindle motor: 15 kW Tool: ISO 50 Tool capacity: 20 Table size: 2.100 x 1.200 mm Max. Table Load: 2.500 kg

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Dkedpfozka Hiex Akiep Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Dodpozka Akofx Akiskp Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, Submitting a bid obligates you to collect the machine by July 27, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,600 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 820 mm B-axis: -100 to +100 degrees Tool magazine: 30 positions Dkjdozkapkspfx Akisp Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Table size: 4,200 x 900 mm Table load: 4,200 kg MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Operating hours (according to the latest service report) Total operating hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT 5-axis machining with NC swivel milling head (B-axis) Linear drive in the X-axis

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Dkodpfjzi U Huex Akiop Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, Year of construction: 2007, Mazak VTC-300C-II CNC Vertical Machining Centre with Mazatrol 640m CNC Control. S/No. 192125 (2007), Table Size 2000mm x 770mm, 30 Tool ATC with Quantity of Tooling Fitted, 12000rpm Spindle Speed, BT40 Spindle Taper, FSE Swarf Coolant System, (2) x Filtermist FX7002, Oil Mist Filter Extractors, Renishaw OMP 60 Probe & RMI Eye, Machine Weight 11500kg. Country of Origin: United Kingdom Dkodpfxszi Tl Aj Akijp Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2022, Mazak VTC 820/20 CNC Vertical Machining Centre with Mazatrol Smooth G Touch Screen CNC Control. S/No. 323190 (2022), Table Size 2500mm x 820mm, Spindle Speed Max 18,000rpm, CAT40 Spindle Taper, 30 Tool ATC Fitted with Various Tool Holders and Renishaw Probe, Cromar Series IV Swarf Coolant System, CIL 1501 Chiller Unit, Clara 3nine Oil Mist Filter Extractor, Machine Weight 14,000kg. Country of Origin: United Kingdom Dkodjzi S Shjpfx Akijp Location: These lots are located in Gateshead, UK

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Dodpfx Akezi A Sfjijkp Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2012, Vertical machining center Machine type: DMG DMF 180 / 7 Control: Siemens 840 D solutionline Year: 2012 SPECIFICATIONS Travel Dodpfx Akjzizccjiekp X-Axis: 1.800 mm Y-Axis: 700 mm Z-Axis: 700 mm Feed: (X/Y/Z): 40 m/min. Rapid motion: (X/Y/Z): 40 m/min. Spindle speeds: 20 - 14.000 rpm Spindle motor: 18,9 / 14 kW Tool: SK 40 Tool capacity: 30 Table size: 2.100 x 700 mm Max. workpiece weight: 1.500 kg Workpiece thickness: 550 mm Power consumption: 19 KW Req. space (LxBxH): 5,533 x 4,231 x 2,693 m Machine weight: 13.000 kg Equipment Chip conveyor

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Swarf Conveyor Dodpfx Akjzilp Toiokp Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display Dkodpfx Aezh U D Dskisp -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), Year of construction: 2002, Make: HEDELIUS Type of machine: CB 80/2300 Year of manufacture: 2002 Control system: Heidenhain TNC 426 Machine's weight: 14.000 kg Tool holder: SK 40 spindel speed: 8.000 1/min x-travel: 2.300 mm y-travel: 800 mm z-travel: 600 mm Speed range: 8.000 1/min max. Table load: 2.800 kg Djdpjzh Huzefx Akiekp Max. workpiece weight: 2.800 kg Operating time: 54.386 h Chip removal device: Ja Spindle operating time: 26.351 h Table dimensions: 2.900 × 750 mm Number of tools in the magazine: 30-fach

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) Dkjdpfx Akjzh Hlaeijp • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Condition: excellent (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 720 mm, nominal power (apparent): 26 kVA, controller manufacturer: Mazak, controller model: SmoothX, workpiece length (max.): 2,500 mm, workpiece width (max.): 820 mm, total height: 3,355 mm, total length: 4,250 mm, total width: 4,046 mm, table width: 820 mm, table length: 2,500 mm, table load: 1,700 kg, rotary table diameter: 500 mm, rotational speed (min.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 7,819 h, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Continuous 5-axis machining. Cromar particle filter chip conveyor, 15 bar internal cooling, Blum workpiece measurement system. Tool magazine with 30 tool slots. Automatic tool length measurement. Work area mist extraction. TI301 – CNC rotary table (360,000 positions) DS50C-R1-Z. The rotary table can be used as a “C” or “A” axis. Handheld remote control. Schunk zero-point clamping system on the rotary table, including two pallets and a 5-axis machine vise. Dksdpozhwi Asfx Akiop

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Mazak machining center, type VTC-200C, year 2002, in like-new condition, 10,000 rpm with spindle cooling. X = 1660 Y = 510 Z = 510 Djdpfxozhv Uwo Akijkp 1000 kg capacity on the table. Several high-quality vices are included. Weight: 9100 kg BT 40 A few holders are included. Space for 30 tools in the magazine. The machine can be picked up ex-works in week 34 of 2026.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Maximum speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain ITNC 530 Spindle operating hours: 14,000 h Dedpfx Aozhn Ayjkiskp Coolant supply: 20 bar Input voltage: 29 V Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,000 mm Total weight: 15,000 kg EQUIPMENT Documentation/Manual Speed adjustable in steps Chip conveyor Coolant filtration system Swinging operation, mountable wall Handwheel Measuring probe Tool changer

Condition: good (used), Year of construction: 1997, Used Hedelius machining center Type BC 80 X-axis: 2500 mm Dsdpozhat Defx Akiokp Y-axis: 800 mm Z-axis: 550 mm SK 50 spindle Heidenhain CNC control with Siemens motors/servos Includes tool/clamping system on the table Year of manufacture: 1999 Excluding chip conveyor

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Max. table load: 2200 kg Dedpfx Akozg Nmkjiskp Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm Dodpfjzg Drzox Akiokp MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: excellent (used), Year of construction: 2009, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Mazak VTC 800/30SR CNC Machining Center (2009) Manufacturer: Mazak Type: VTC 800/30SR CNC Machining Center Year of manufacture: 2009 Condition: used, good, in production and operational Operating hours: 34,000 h Simultaneously controlled axes: 5 Travel in X-axis: 3,000 mm Travel in Y-axis: 800 mm Travel in Z-axis: 720 mm Feed rate X, Y, Z: 50,000 mm/min Rapid traverse rate X, Y, Z: 50,000 mm/min Minimum distance spindle / table: 140 mm Maximum distance spindle / table: 860 mm Table length: 3,500 mm Table width: 820 mm Max. table load: 2,500 kg Swivel range B-axis: +110° / -110° Work table area: Ø 500 mm C-axis: Table rotation 360° Spindle mount: CAT No. 40 Dksdezgxg Tjpfx Akijp Max. spindle speed: 18,000 rpm Spindle power: 35 kW Tool magazine: 48 positions Max. tool length: 350 mm Max. tool weight: 8 kg Max. tool diameter: 80 - 130 mm Machine dimensions: 5,250 x 4,300 x 3,419 mm Weight: 16,800 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: FANUC, controller model: Series 31i, table width: 1,050 mm, table length: 4,100 mm, overall weight: 22,500 kg, spindle speed (max.): 3,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Machine Benefits Qualitative Machine Benefits • Very good condition! Technical Machine Benefits Dodszgvk Ajpfx Akijkp • Spindle motor power 22/26kw

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Manufacturer: Wagner Model: WMC 1800 Year of manufacture: 2013 Siemens 828 control Condition: good, used, currently in production X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Tool measuring system Handwheel Without tools Dedszgvg Repfx Akiekp

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Dsdpfx Akszf T I Nsiskp Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: used, Year of construction: 2009, 2009 OKUMA MILLAC 800 VH Palletised System 5 Axis Machining Centre With OSP P200M Control Automatic Pallet Changer (APC) 6-Station Automatic Pallet Pool, Including 4 Additional Pallets. Tool Magazine 120-Station ATC (Automatic Tool Changer). Linear Glass Scales On 'X, Y, Z' axes (In Addition To Standard Encoders). 'A'-Axis Rotary Scale: Circular Glass Scale On Tilting Head Spindle ('A'-Axis), 0.001° Resolution, Equipped With Tilting Brake Clamping. 'C'-Axis Rotary Scale: Circular Glass Scale On Rotary Table ('C'-Axis), 0.001° Resolution, Equipped With Continuous Brake Clamping. Maximum Spindle Speed 10,000rpm (18.5/22 kW Motor), 21 Nm Torque. Spindle Taper BT 50 BIG PLUS. Pallet Dimension 800 x 800mm. Maximum Pallet Load 1,000kg. Axis Travel 'X'=1,020mm, 'Y'=1,020mm, 'Z'=1,020mm. Rapid Traverse 'X'=30m/min, 'Y'==30m/min, 'Z'=30m/min, 'A'=3,600min-1, 'C'=3,600min-1. Cutting Feed 'X, Y, Z'=1-12,000mm/min, 'A, C'=1-2,400°/min. Spindle Nose To Pallet Top (Vertical) -100 To 920mm. Spindle Centre To Pallet Centre (Vertical) -50 To 970mm. Spindle Centre To Pallet Top (Horizontal) 150-1,170mm. Spindle Nose To Pallet Centre (Horizontal) -300 To 720mm. Maximum Tool Ø125mm (Ø200mm Without Adjacent Tool), Maximum Tool Length 400mm, Maximum Tool Weight 20kg. Tool Change Time (T-T) 4.5sec. Power Capacity 60kVA. S/No.143486 (2009/03). Dsdpfjzfhudex Akijkp With Workpiece Probe: Spindle-Loadable Measuring Probe (From ATC) For Workpiece Zero-Setting & Inspection, Including Macro B Software Option On The CNC. Air Blow System: Spindle Annular Air Blow For Chip Removal & Cone/Flange Cleaning (BT 50 Big Plus). Tool Sensor: BLUM Laser System For Tool Length And Ø Control, Including Pneumatic System For Laser Lens Cleaning. Coolant Through Spindle (CTS): High-Pressure CTS System At 70 BAR (13/18 L/min / 6.9 MPa) With Inline Centrifugal Filter. Spindle Air/Fluid Output: Selectable Air Blow Or Coolant Through Spindle. Shower Coolant: Overhead Shower Wash System. Wash Gun: Coolant Wash-Down Gun Including Dedicated Pump. Chip Conveyor: Drum Filter Type Chip Conveyor With 700L Tank. Oil Skimmer: Installed On The Chip Conveyor. Work Coordinate System Expansion: Expanded To 400 Tool/Workpiece Origins. Tool Offset Expansion: Expanded To 500 Tool Length And Radius Offsets. 3D Tool Radius Compensation: Three-Dimensional Tool Radius Compensation Software. SUPER NURBS Kit: Included (Features: Tool Length Compensation, Vector Control, Lateral Tool Compensation). Data Transfer: DNC-DT Ethernet Software Interface. Programming Functions: Scaling (G50/G51 codes), Mirror Imaging, And Programmable Custom Message Input. Cycle Restart: Sequence Return / Block Restart From Any Interrupted Block. MOP (Machining Operation Monitor): Self-Learning Cutting Load Control/Tool Overload Monitoring. G93 Function: Inverse Time Feed Function. Thermal Compensation: Spindle Tilt Thermal Compensation Software. Overall Dimensions L4,760 x D6,300 x H3,600mm. Weight 22,000kg.