Whirlcare Industries GmbH

Condition: like new (used), Year of construction: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Complete HPLC System – 2023 For sale is a high-end Shimadzu LC-2050C 3D liquid chromatograph, additionally equipped with a Shimadzu RF-20AXS fluorescence detector. Both instruments were manufactured in 2023. The set is unused and in very good cosmetic condition. System Configuration • Shimadzu LC-2050C 3D – Integrated HPLC System • Built-in PDA (Photodiode Array) detector • Shimadzu RF-20AXS – External FLD (Fluorescence Detector) • Integrated autosampler • Sample cooling • Column thermostat • Four-component low-pressure gradient • Integrated touchscreen panel • Dell computer • UPS / Emergency power supply • Accessories and cables as shown in the photos Shimadzu LC-2050C 3D – Key Parameters Pump • Flow rate setting range: 0.0001–10 mL/min • Four-component low-pressure gradient • Gradient setting range: 0–100%, step 0.1% • Maximum pressure: • 50 MPa at flow rates of 0.0001–3 mL/min • 44 MPa at flow rates of 3.0001–5 mL/min • 22 MPa at flow rates of 5.0001–10 mL/min • Integrated mobile phase degassing system Autosampler • Automatic sample injector • Sample injection volume range (standard configuration): 0.1–100 µL • Sample injection volume accuracy: ±1% at 50 µL • Sample cooling/thermostating capability • Sample cooling temperature range: 4–45°C PDA Detector The LC-2050C 3D version features an integrated PDA (Photodiode Array) detector, enabling spectral recording and analysis of multiple wavelengths. Thanks to the PDA detector, the system allows not only for standard chromatographic analysis but also for spectral evaluation of detected substances. Shimadzu RF-20AXS Fluorescence Detector The system has been additionally equipped with a high-sensitivity RF-20AXS fluorescence detector, significantly increasing the analytical capabilities of the entire set. RF-20AXS Parameters • Light source: Xenon lamp • Additional low-pressure mercury lamp for wavelength accuracy control • Wavelength range: 200–750 nm • Spectral bandwidth: 20 nm • Wavelength accuracy: ±2 nm • Wavelength repeatability: ±0.2 nm • S/N for the Raman peak of water: ≥2000 • Standard flow cell: 12 µL • Maximum cell pressure: 2 MPa • Cell thermostat • Ability to monitor two pairs of excitation/emission wavelengths simultaneously The combination of PDA + FLD (Fluorescence Detector) provides a wide range of analytical capabilities and allows for the determination of both standard UV/Vis absorbing compounds and substances requiring highly sensitive fluorescence detection. Device Data Shimadzu LC-2050C 3D • CAT. NO.: 228-65822-58 • Year of manufacture: 2023 Shimadzu RF-20AXS • CAT. NO.: 228-65305-58 • Year of manufacture: 2023 Application The system is intended for, among others: • Pharmaceutical laboratories • Quality control • Chemical laboratories • Food industry • Environmental research • Research and development laboratories • HPLC analyses requiring PDA detection • Trace analyses using fluorescence detection Condition Year of manufacture: 2023 Device is unused. Very good cosmetic condition – consistent with the photos. Sale of a complete set: Shimadzu LC-2050C 3D + RF-20AXS + Dell computer + UPS + accessories shown in the photos. Nedjzv Salspfx Afwjda Additional photos, serial numbers, and information about the device can be provided upon request.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Ndsdpszv Rhusfx Afwsa Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, Nodjzv Idtepfx Afwoda 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: like new (used), Year of construction: 2024, bolt circle diameter: 2,500 mm, FARO Quantum X.S Max 2.5m – 2024 + PolyWorks|Inspector Probing A very recent FARO Quantum X.S Max 2.5m from 2024 – complete with ISO 10360 calibration, PolyWorks|Inspector, and training. Are you looking for a high-quality, accurate, and flexible mobile 3D measurement solution? This FARO Quantum X.S Max 2.5m offers a complete solution that allows you to get started right away. The Quantum X.S Max was manufactured in 2024 and is the high-end Max version within the FARO Quantum series. The arm is offered in a probing configuration and is delivered complete with PolyWorks|Inspector™ for tactile 3D measurements and training. Nedpfx Afezvyxpewsda Specifications Manufacturer: FARO Model: Quantum X.S Max Year of manufacture: 2024 Measurement range: 2,500 mm Version: 7-axis measuring arm Configuration: Tactile Probing 3 mm iProbe 6 mm iProbe Original transport case FARO Fold tripod Mounting plate Calibration set Power supply/battery and accessories Calibrated according to ISO 10360 The FARO Quantum X.S Max is calibrated according to ISO 10360 before delivery. With this, you will not just receive a used measuring arm, but a professional measurement solution whose performance is checked and documented before delivery. Including PolyWorks|Inspector version 2026 The measuring arm is delivered with PolyWorks|Inspector for probing, which provides you with a powerful and user-friendly software environment for, among other things: Dimensional and geometric inspections GD&T checks Alignments CAD-to-part inspections Graphical measurement reports Digital inspection reports Repeat measurements and series inspections Training included Training is included with the purchase of this complete solution. During the training, the user will receive practical guidance on working with the FARO measuring arm and PolyWorks|Inspector. This allows you to quickly and effectively use the combination within your own measurement environment. Complete measurement solution You will receive: FARO Quantum X.S Max 2.5m + 3 mm & 6 mm iProbe + FARO Fold tripod + ISO 10360 calibration + PolyWorks|Inspector Probing + Training One complete package, so you can start professional mobile 3D measurements right away. Why choose this combination? Very recent measuring arm from 2024 High-quality Quantum X.S Max version Practical measurement range of 2.5 meters Calibrated according to ISO 10360 Including PolyWorks|Inspector Including training Complete hardware and software solution An interesting alternative to investing in a completely new system A complete, professional mobile measurement solution for a significantly more attractive investment than a new one. Contact us for price, availability or more information.

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 230 V, total width: 996 mm, total length: 1,311 mm, total height: 2,633 mm, overall weight: 250 kg, input frequency: 50 Hz, Equipment: documentation/manual, The InspecVision Planar P70.20 is a high-speed, non-contact 2D optical measurement and reverse-engineering system. Machine type: 2D optical inspection and measurement system Maximum part length: 1,000 mm Maximum part width: 667 mm Maximum part thickness/height: Up to 350 mm* Maximum part weight: 50 kg, evenly distributed Measurement accuracy – length/width: ±20 / ±40 µm Point spacing / resolution: 0.18 mm Measurement speed: Less than 0.25 seconds SurfScan resolution: 0.15 mm Camera: High-resolution industrial camera Lighting: LED Software: InspecVision inspection, SPC, reporting, and reverse-engineering software CAD comparison: DXF comparison and dimensional inspection Reverse engineering: Available Power supply: 230 V, single phase, 50 Hz Maximum power consumption: Approx. 4 A Operating temperature: 10–30 °C Computer interface: USB 2.0 / USB 3.0 Approximate machine dimensions (W × D × H): 1,311 × 996 × 2,633 mm Nodpfezvxg Esx Afwjda Machine weight: Less than 250 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Ndjdpszvrmxsfx Afwea Complete with case as pictured

Condition: used, Year of construction: 2015, Year of construction 2006 CNC controlled video measuring device Measurement software MeasureMind 3D Touch Probe TP200 PC system and 2 x TFT monitor Reflected light, transmitted light, Xoaxiallicht LED ring light Further equipment, software modules, probe changers and accessories optional. Installation and commissioning, individual training possible with us in Remscheid or at your location. Ndodpszvl Sujfx Afwsa

Condition: new, Siemens 7KT1666 three-phase energy meters Description: 1,680 pcs Siemens 7KT1666 three-phase energy meters Siemens type: 7KT1666 / 7KT1666EE000EE0 Technical details: * Three-phase energy meter * 3x230/400 V * 0.75–15 (80) A * 50 Hz * RS485 communication * 2 tariffs * MID approved * DIN-rail mounting * Made in Italy Condition: New / unused surplus stock. The meters originate from surplus industrial stock and are available directly from our warehouse in Rotterdam, The Netherlands. Large quantity available, packed in original Siemens bulk boxes. Total quantity: 1,680 pcs Preferably sold as one complete lot. Location: Rotterdam, The Netherlands Delivery: Ex Works Rotterdam – loading can be arranged Payment: 100% before collection/shipment Inspection of the goods is possible by appointment. Worldwide shipping can be arranged at buyer’s cost. Nedpfozvii Rex Afweda

Condition: used, Year of construction: 2018, A manual shaft measuring device for measuring shafts and rotationally symmetrical workpieces and for determining various form, position, length and diameter parameters is offered. Measuring length: 1200mm, max. workpiece diameter: 200mm, max. workpiece weight: 50kg, measuring method: manual, software: PREMION measuring software, operating system: Windows 11. Equipment: PC with monitors, keyboard and mouse, manual length and diameter module, centering tips and additional measuring accessories, PC replaced and equipped with Windows 11. Weight: 250kg. An on-site inspection is possible. Nodpfezvgibox Afwjda

Condition: used, Keyence IM 7030T: Digital measuring projector. This offer is exclusively for commercial enterprises as defined in §14 of the German Civil Code (BGB). Ndjdpfx Afozvgatjwsa

Condition: good (used), Offered here is a measuring microscope from the manufacturer Mahr. Ndsdpfx Afszu I Enjwja Manufacturer: Mahr Type: WMZ Serial No.: M-073-08

Condition: new, functionality: fully functional, Equipment: documentation/manual, type plate available, New, unused ZEISS scanning probe set, comprising: ZEISS VAST XXT TL3. ZEISS VAST RDS head. Compatible with ZEISS PRISMO, ACCURA, CONTURA, and current-generation CMM platforms. Ndodpfx Afozuur Iswoa Condition details: New, never installed/used Complete accessory set as pictured

Condition: excellent (used), Year of construction: 2015, Incremental measuring probe HEIDENHAIN MT 60M ID 359 341-01 Measuring probe extension: extended by spring force Measuring length: 60 mm Guide type: ball guide Reference mark position: 1.7 mm Nsdpfezuc Dxsx Afwjda Accuracy class: 0.5 µm Electrical connection: M23 connector, pin, 9-pole Connection assignment: D295051 Cable type: PUR, Ø 4.5 mm Cable length: 1.50 m Output signal: sinusoidal current signals (11 µA) Pitch period: 10,000 µm Voltage supply: 5V (+-5%) Protection class: IP 50 (EN 60529) Operating temperature: +10/+40 °C

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, type plate available, FARO Quantum M ScanArm 2.5 m with FAROBlu HD Laser Line Probe and MetrologyWorks Kodiak HDP-KCF heavy-duty tripod Complete portable 3D metrology system for tactile coordinate measurement and 3D scanning. System configuration: FARO Quantum M ScanArm Measuring range: 2.5 m 7-axis articulated measuring arm FARO LLP HD Laser Line Probe, Rev. 3.2 Tactile measurement probes and accessories MetrologyWorks Kodiak HDP-KCF heavy-duty carbon-fiber/aluminium tripod Original FARO transport case Batteries, power supply and cables Mounting accessories Existing calibration documentation The system is suitable for dimensional inspection, CAD-to-part comparison, First Article Inspection (FAI), production control, tooling and fixture inspection, and reverse engineering. The measuring arm and scanner are fully functional and can be demonstrated under working conditions. Calibration information: Ndsdpfx Afszt Dpyewoa Measuring arm: last calibration October 2024 LLP HD scanner: calibration date April 24, 2024 Scanner manufactured July 2019 A current recalibration is not included in the offer. The included MetrologyWorks Kodiak HDP-KCF is a professional heavy-duty metrology tripod designed for portable CMM arms and laser trackers. It features carbon-fiber/aluminium construction and a universal 3½"-8 mounting ring. Original technical documentation is available. Please note: The laptop and PolyWorks software shown in some pictures are not included in the sale. Inspection and live demonstration are possible by appointment in Gabčíkovo, Slovakia. EU-wide insured shipping can be arranged at the buyer’s expense. Personal collection is also possible. Price: EUR 24,900 net, negotiable.

Condition: new, kern-kfp-v20-ip65 Njdpoztxcujfx Afweda Please note that the display is not included in the scope of delivery. - Weighing platform made of stainless steel. - The floor scale is made of aluminum and has a silicone coating, IP65, OIML-R60 approval, Class III, 3000 e. - The adjustable feet ensure perfect balance, allowing for accurate results.

Condition: ready for operation (used), Year of construction: 2015, A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible. Njdeztduiepfx Afwsda

Condition: new, Year of construction: 2026, Length measuring device ASB ----- - Freely selectable setpoint - Switchover from absolute to relative measurement - Easy readability thanks to digital display - Automatic display shut-off - Low installation effort Technical data Length measuring device ASB Measuring range: ASB: 1,000 mm - 6,000 mm Ndedszr U Nbspfx Afwsa Accuracy: +/- 0.1 mm over 3,000 mm Resolution: ± 0.01 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 65 mm, workpiece length (max.): 2,500 mm, workpiece height (max.): 65 mm, workpiece width (max.): 1,000 mm, Equipment: documentation/manual, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces. Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15” touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeatability X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeatability Z +/- 0.02 mm Resolution 0.01 mm Measurement: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Angularity ⦁ Parallelism ⦁ Borehole position X/Y ⦁ Borehole diameter ⦁ Borehole depth (relative) ⦁ Radii / diameter ⦁ Groove position ⦁ Groove depth (relative) ⦁ Fold position ⦁ Fold depth (relative) ⦁ X/Y/Z position of horizontal bores ⦁ Depth of horizontal bores (relative) Measuring program: 8-point measurement for 4-sided parts (e.g. rectangle, parallelogram, or trapezoid) Procedure: 8 points of the workpiece are scanned (two points each on every line at the corners) Result: Display of 2 x length (top, bottom), 2 x width (right, left), 4 x angle Protocol: When target values and tolerance specifications are entered, a target/actual comparison is created with deviations and displayed in a table. Storage of the measurement results as a PDF (protocol) or in an SQL database for statistical analysis. Inspection and documentation of the manufacturing status in the production process, after cutting, after edging or after drilling the workpieces, depending on the value-added process. Vacuum system (Venturi principle) 6 vacuum suction cups integrated in the measuring field fix the workpiece during the measuring process. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Nsdpfxszr Ud Ss Afwsda Weight: approx. 450 kg Power connection: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/Control 17” Touchscreen HECHT DesQ II software Windows 11

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Demonstration machine – subject to prior sale - Operating system: Windows 11 For measuring external dimensions and performing one-sided inspections of vertical and horizontal boreholes in plate-shaped workpieces. APPLICATION AREA: Tooling aid: Measurement of the first production part Sample inspection: Measurement of samples MEASUREMENT CRITERIA: Dimensions: Length, width, angle Borehole, vertical: Position, diameter, depth, borehole spacing Borehole, horizontal: Position, diameter, depth, distance to the top of the plate. (NOTE: Test pins or inserted dowels are required). Groove: Edge distance, width, depth Radius: Center point position, radius Flange: Width, depth Recesses: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: the measurement of vertical and/or horizontal boreholes as well as grooves and flanges on the Y-axis is possible up to the position 1,150 mm) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/- 0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy - independent of daylight) Measuring plane: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor: approx. 1,000 mm +/- 50 mm Space required approx. L/W/H: approx. 5,000 mm / 2,000 mm / 1,700 mm Weight approx.: 2,400 kg + control cabinet including control panel approx. 200 kg Total electrical connection: 2500 W Compressed air connection: 6 bar Operating side: left Operating voltage: 230 V / 16 A – (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: At higher temperatures, an air conditioning unit in the control cabinet is recommended – available as an option.) Subject to technical changes. The above performance data assumes that suitable workpieces are used. Scope of supply: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x Software license CAD4U and Hecht interface for creating measurement programs on a PC in the preparation area ⦁ 19" PC with CAD4U software license and interface for creating measurement programs, current software version Results and driver for measurement program execution, image processing software ⦁ Camera, lens and lighting for image acquisition ⦁ Operating system Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring the lateral boreholes: 10 pieces each with diameters 5, 6, 8 ⦁ 4 x right-angle brackets for black parts ⦁ SQL Express database installed on the machine computer Languages: The operating software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian and Chinese. Other languages available on request. SAFETY AND PROTECTION DEVICES Ndodpfezr Udrsx Afwja EMERGENCY STOP switch All machines for EU member states with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be completely separated by a protective fence. This and other protective devices are not included in the scope of supply.

Condition: excellent (used), Year of construction: 2020, Keyence VR-5000 – Non-contact 3D measurement system The Keyence VR-5000 One-Shot 3D is an advanced, non-contact measurement system that utilizes optical technology for fast and highly precise measurement of part geometry. The device performs a complete 3D scan in seconds, enabling dimensional control, profile analysis, height and volume measurements, surface roughness analysis, and comparison of parts with a CAD model. The offered set includes: * Keyence VR Series One-Shot 3D measuring head * Keyence VR-5200 controller * Keyence VR-H3W measuring table * Dell control computer * HP monitor * Keyboard and mouse * User manual * Complete set ready for operation Key advantages * Non-contact 3D measurement with high accuracy. * Very fast measurement – a complete scan in seconds. * No influence of pressing force on the measured part. * Automatic generation of height maps and 3D models. * Ability to measure parts with complex geometries. * Intuitive software with reporting and data export functions. * Ideal for quality control, metrology laboratories, the automotive, aerospace, electronics, medical, and precision manufacturing industries. Typical applications * Height, width, and depth measurements. * 2D and 3D profile analysis. Ndjdpfx Aezr Rllefwoa * Tool wear analysis. * Volume and flatness measurements. * Inspection of parts after CNC machining, stamping, and molding. * Comparison of a part with a reference CAD model. * Quality control of serial production. Condition The device is in very good visual and technical condition. The set is complete and includes the control computer and accessories shown in the photos.

Condition: new, Year of construction: 2018, functionality: unexamined, Yokogawa ROTAMASS Supreme Coriolis Mass Flow Meter in excellent condition. Specifications: Manufacturer: Yokogawa Model: ROTAMASS Supreme Sensor model: RESSC38A10 Converter model: RCCS-25BA10-0C70-SF22-A-B1 Ndsdpfx Afszriguswsa Size: DN25 (1") Power supply: 24 VDC ATEX / Explosion-proof Stainless steel construction Year: 2018 Complete with transmitter Ready for installation The unit is sold as is, where is, without any warranty. Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck.

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Ndjdpfx Afszrgvmjwoa

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, Complete Package Including: Zoom 90 R 5'' Robotic Total Station WinCE AiM360, TRack360 and Scout360, 5", accXXess10 EDM 1000M, Long-range Bluetooth 500m, User manual in French, Li-Ion battery 4.4Ah, Li-Ion battery charger, Lead-free optical tribrach, Industrial-grade SD card, 1GB, Notebook holder, 360° prism, Touchscreen tablet, X-Pad topographic software included. Calibration certificate. Suitable for Civil Engineering, Surveyors, Topographers, Construction, and Public Works. The Zoom90 robotic total station is an ultimate single-person system, offering up to 20% more automated performance, extended 1000m reflectorless measurement capabilities, STReAM360, accXess technologies, and open Windows CE connectivity. OPEN CONNECTIVITY Connect your preferred software and data logger to perform remote control tasks without reducing productivity. The Zoom90 uses the Windows CE operating system, which allows the execution of many powerful field software applications. Full VGA color touchscreen, ensuring optimal performance and graphics capabilities. TOPOGRAPHY ADVICE Alternative solutions in terms of measurement and software. #Topography #TotalStation #Leica #LeicaGeosystems #TopographicEquipment #UsedTopography #Surveyor #Geomatics #3DScanner #GPS #Theodolite #Monitoring #PublicWorks #ConstructionSite #LaserScanner #Mapping Ndsdezq Hu Hjpfx Afwea

Condition: like new (used), Year of construction: 2020, functionality: fully functional, [We are offering this like-new ROMER 8525 absolute arm measuring system, manufactured in 2020.] Nodpfx Aezq Afnofwjda Translation into English: "We offer this 2020 model, like-new ROMER 8525 absolute arm measuring system." If you have any questions or need further information, you can send us a message or call us.

Condition: ready for operation (used), Year of construction: 2024, Lease Return Mahr MarSurf XP 20 Professional CNC surface and contour measuring station – manufactured in 2024 Technical Data Manufacturer: Mahr Model: MarSurf XP 20 Professional – Series 1000 Year of Manufacture: 2024 Condition: Used Equipment MarSurf XP 20 Professional with LD control MarWin Professional Contour & Roughness Plus CNC-Plus Software QS-STAT Plus (Q-DAS interface) Industrial PC (Dell) with Windows 10 IoT Enterprise Feed unit MarSurf LD 130 Feed length: 130 mm Standard measuring stroke Z: 13 mm Nsdpfx Afszqzn Uowoda Probe arm changer for up to 10 probe arms 4-axis CNC workpiece positioning system Swivel axis ±135° Rotary axis ±170° Linear axis X: 400 mm Linear axis Y: 400 mm Positioning accuracy: approx. ±250 µm (X/Y/Z) Hard stone measuring plate with mechanical-pneumatic vibration isolation CNC measuring column 17" touchscreen Control cabinet Soundproofed protective enclosure Machine dimensions Enclosure (W × D × H): 1450 × 1300 × 2270 mm Accessories Adapter plate X/Y/Z offset Manual chuck DM28 Signal tower Probe arm set Additional probe arm 32 GB RAM Complete technical documentation (digital and in paper form) Description For sale is a high-quality CNC surface and contour measuring station from Mahr. The system is suitable for highly precise measuring tasks in industrial quality control and features extensive equipment with professional measuring and evaluation software as well as an automatic 4-axis positioning system. The system was delivered in 2024 and is in used condition. Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.