Used heavy-duty shelves for sale (204)

Condition: good (used), Price plus VAT. The product is also available in other quantities and designs. Included in this package: 160 x stands a 700cm x 110cm (blue) 1216 x trusses a 2,70m (orange) 2432 x safety pins On request with chipboard 38mm incl. depth bars for 100€ per level Results in 8 rows of racks with 19 bays each with 4 levels + floor space = total 2280 pallet spaces (1000kg per pallet) Manufacturer: SLP Type: SL20 Condition: used, good condition height: 700 cm length: approx. 8 x 5340cm shelf depth: 110 cm bracing: screwed truss length: 2,70 m shelf load: 3000 kg bay load: 12000 kg Pallet spaces: 2280 Accessories like Floor mounting Connector Cedoid H Umjpfx Adaori Load warnings Collision gates Guard rails Gratings Rear wall grids Depth bars Boundary railings and much more... Just ask us!

Condition: used, Size: 200x1280 mm 3 EUR/piece 100x1280 mm 1.5 EUR/piece Cjdjik E Npepfx Adajri If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving units and accessories, and are happy to assist you with your planning. Additional accessories such as: Frames, corner and impact protection, push-through protections, chipboards, wire mesh decking, rear mesh panels, depth bars are available. Shipping: Please inquire about shipping costs by providing your postal code and location, as well as the desired quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to technical changes, errors, and prior sale!

Condition: excellent (used), total height: 6,300 mm, shelf height: 6,300 mm, support length: 2,700 mm, 24.3 linear meters of pallet racking from the manufacturer: META / Thyssen, model: MultiPAL N Very good condition, inspected annually and repaired as needed. The offer includes: 10 uprights 6.3m x 100cm (height x depth), 64 crossbeams 270cm, and 8 crossbeams 1.8m, as well as the locking pins. This results in 5 storage levels per rack bay, including the floor level. This results in up to: 130 EPAL storage spaces and approximately 24.3 linear meters of racking. Crjdpfsv Db Tzox Adaei Bay load 9t and compartment load 2350kg. Extra quantities are generally possible; simply request and state your requirements. Over 700 linear meters of this system are available. Optional accessories such as mesh shelves, upright protection, etc. are available for an additional charge. Price net plus VAT. Price includes professional disassembly, packaging, and loading by our team using a forklift. Delivery via freight forwarder throughout Europe is possible for an additional charge.

Condition: good (used), Year of construction: 2012, Pallet sliding rack for Euro pallets etc., SSI Schäfer, 1,000kg / pallet, 2,552 Euro pallet spaces - used -: Price ex location: €79,500 (net), plus dismantling etc.! Manufacturer: SSI Schäfer Type: PR600 / mobile longitudinal beam rack A6/A7 Year of manufacture: 2012 Manufacturer: SSI Schäfer Type: mobile rack system PR 600 2 wall racks 4 mobile racks with double racks Cart length = 39,432mm Cart width = 2,700 mm PAL spaces = 2,552 Euro pallets Data for mobile racks: Rack height (top shelf): 7,094mm Frame height (inside): 7,100 mm Frame height (outside): 7,600 mm Rack depth: 1,050mm Number of storage levels: 7 Lower shelf height: 2,444mm Support profile: P 15 Shelf loads: Level 1: Clear bay width: 2,700mm, profile IPE 100, shelf load 3,000kg Level 2-7 Csdpjvnzgcsfx Adasri Clear bay width: 2,700mm, profile CE 110, shelf load 3,000kg Max. pallet weight: 1,000kg Max. usable bay load: 21,000kg Number of trolleys: 4 Max. load per trolley: 540,000kg 3x400 / 240 V AC, 28A, Motor power per trolley: 4x 0.75kW = 3kW Control voltage: 24V Fixed shelf: Type: PR600 / longitudinal beam shelf A1 Year of construction: 2012 Shelf height (top shelf): 7,042mm Shelf depth: 1,050mm Number of storage levels: 3 Lower shelf height: 2,942mm Support profile: P 15 Shelf loads: Clear Field width: 2,700mm, profile CE 110, shelf load 3,000kg Clear field width: 3,600mm, profile CE 160, shelf load 4,000kg Max. pallet weight: 1,000kg Max. usable field load: 9,000 / 12,000kg Condition: good - very good Available: from the end of March 2025 Location: 78713 Schramberg-Waldmössingen

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220210356, total length: 2,000 mm, total width: 2,000 mm, load capacity: 555 kg, Promag pallet wrapping machine, condition practically like new. Codsxcnf Ropfx Adasri

Condition: good (used), 1x pallet racking by Jungheinrich Mp-B Specifications: - Height: approx. 600 cm - Depth: approx. 110 cm - Length: approx. 15 linear meters - OFFER - Condition: good - Uprights in blue - Beams 270 cm - Beams in yellow Rack consists of: - 06 x upright approx. 600 cm x 110 cm - 30 x beam approx. 270 cm - Provides 60 pallet spaces. Price: Cjdpfswym T Rjx Adaeri €2150 net plus VAT. You will receive an invoice with VAT shown separately.

Condition: good (used), Included in this package: 11 x stands a 700cm x 110cm (gray) 60 x crossbars a 3600mm (gray) 120 x safety pins Results in a rack row with 10 bays each with 3 levels of floor space = a total of 160 pallet spaces (800kg per pallet) Manufacturer: Bito Type: P4 Condition: used, good condition Height: 700 cm Length: approx. 1 x 37.10m Shelf depth: 110 cm Bracing: screwed Truss length: 3.60 m Shelf load: 3200 kg Bay load: 9600 kg Pallet spaces: 96 Accessories such as Floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us! Cedpfsrhkvnsx Adaori

Condition: used, Frame: 5500x1100x80 mm 9 pieces 5000x1000x80 mm 2 pieces 5000x1100x80 mm 4 pieces Crossbeams: Crodpshryh Hofx Adaei 2750x1100x80 mm 1 piece 2576x130x50 mm 40 pieces 2576x120 IPE mm 4 pieces 3500x115x45 mm 2 pieces If you require racks or accessories in other configurations or specifications, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and we are happy to assist you with your planning. Additional accessories available, such as: Frame, corner and collision protectors, push-through protections, chipboards, grating inserts, mesh back panels, and depth supports. Shipping: Please inquire about shipping costs, specifying your postal code, city, and desired quantity of items. Further services: Planning, rack assembly/disassembly, purchase/sale Technical data, specifications, and prices may be subject to change or error. Subject to prior sale!

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) Crjdpfx Adomhhy Noaoi - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), approx. 250x stanchion racks / storage racks / stacking racks, approx. 1.98 x 1.40 x 2.45m - second-hand - : Price per piece ex location: only 155.-€ (net)! Manufacturer: unknown Type: unknown Year of construction: unknown Load capacity: unknown Interior dimensions: 180 x 139 x 225 External dimensions: 198 x 140 x 245 Own weight: approx. 150 kg Load capacity: approx. 500 kg (no guarantee) Load capacity: approx. 1000 kg (no guarantee) Stackability: 3-fold Base material: Plastic Each unit consists of: - 2 removable side panels Cjdpfxsu Himre Adaeri - 3-piece plastic base - Base profile - Stiffening strut (red rods 3x) Condition: good Available: immediately Location: 72379 Hechingen

Condition: new, Hayrax Cross Beams – For Front and Under Board | For 1100 mm Racking | Thousands of Units in Stock! We offer robust cross beams for warehouse racking with a depth of 1100 mm – ideal both as pallet support beams and for boards. Our beams increase stability and safety of storage, enabling efficient organization of your warehouse space. Available colours: Yellow Orange Crodow Dp Apjpfx Adaei Blue Technical data: Load capacity: 500 kg Application: for under board or as pallet cross bars Compatibility: racking with 1100 mm depth Offer highlights: Thousands of units available for immediate delivery Possibility to manufacture beams in other lengths and colours upon request Durable construction, powder-coated finish, visually appealing design Ideal to improve racking rigidity and secure loads Looking for strong and aesthetic cross beams? Call us to order in bulk or individually. Manufactured and available directly from Magazimm!

Condition: good (used), Price plus VAT. The product is also available in other quantities and designs. Included in this package: 80 x stands a 700cm x 110cm (blue) 608 x trusses a 2,70m (orange) 1216 x safety pins On request with chipboard 38mm incl. depth bars for 100€ per level Results in 4 rack rows with 19 bays each with 4 levels + floor space = total 1140 pallet spaces (1000kg per pallet) Manufacturer: SLP Type: SL20 Condition: used, good condition height: 700 cm length: approx. 4 x 5340cm shelf depth: 110 cm bracing: screwed truss length: 2,70 m Cedpfxjibwpyo Adaeri shelf load: 3000 kg bay load: 12000 kg Pallet spaces: 1140 Accessories like Floor mounting Connector Load warnings Collision gates Guard rails gratings Rear wall grids Depth bars Boundary railings and much more... Just ask us!

Condition: used, Crossbeams: 2700x120x50 mm – 63 pieces 2700x120x50 mm – 1 piece 1800x100 mm (ideal for chipboard): 1 piece Frames: 5200x1000x95 mm – 17 pieces 4600x1000x90 mm – 4 pieces 2300x1000x95 mm – 2 pieces Cjdpfxeh Izr Ue Adaeri If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and collision protection, push-through protections, chipboards, wire meshes, rear wall grids, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Changes and errors in technical data, specifications and prices as well as prior sale reserved!

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Cjdpsmhh Dtefx Adajri When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Frames: 5500x1080x75 mm, 10 pieces 4685x1080x75 mm, 1 piece 8860x1050x80 mm, 49 pieces 5500x1080x75 mm, 6 pieces 3369x1050x75 mm, 7 pieces Beams: 1860x75x45 mm (2,800 kg per level), 520 pieces 1600x80x40 mm, 1 piece Cjdsd Hbqnspfx Adaori 1500x80x40 mm, 1 piece 2200x120x50 mm, 1 piece 2760x110x45 mm, 2 pieces 3000x80x40 mm, 1 piece 3010x80x40 mm, 1 piece 1860x90x45 mm, 4 pieces 2660x100x45 mm, 2 pieces 2760x115x45 mm, 2 pieces 2660x90x45 mm, 4 pieces 2760x100x45 mm, 40 pieces 2300x80x40 mm, 2 pieces 2660x90x40 mm, 1 piece 2500x80x40 mm, 3 pieces 2400x80x40 mm, 2 pieces 2760x115x45 mm, 2 pieces 2760x115x45 mm, 2 pieces 3010x80x40 mm, 2 pieces Partial quantities can also be purchased. If you require racking systems or accessories in different configurations or executions, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and are happy to assist you with your planning. Providing you with a customized offer is a matter of course for us. Shipping: Please inquire about shipping costs by providing your postal code, location, and the desired quantity of articles.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Codpsfdkb Tsfx Adasri - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, Frame: 9550 mm Crossbeams: 2700*100 mm, 2900*100 mm Load capacity: 2400 kg/level If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves as well as accessories and are happy to support you with your planning. Further accessories such as: Frame, corner, and impact protection, push-through protections, chipboard panels, grating, rear wall grids, depth bars available. Cjdpfjv D Ix Dsx Adaeri Shipping: Please inquire about shipping costs by providing your postal code, location, and desired quantity of articles. Further services: Planning, shelving assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information, and prices as well as prior sale!

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Crsdpfsmhh Dhex Adaoi The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Frame: 6000x1000 mm Beams: 2680x100 mm and 2700x100 mm Load capacity: 800 kg per compartment If you require racks or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and impact protection, push-through protections, chipboards, wire mesh decks, back mesh panels, depth supports available. Shipping: Please inquire about shipping costs by providing your postal code, location, and the desired quantity of items. Other services offered: Planning, racking assembly/disassembly, purchase/sale Technical specifications, details, and prices are subject to change and errors. Subject to prior sale! Crodspu Amhjpfx Adaei

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Cjdpfx Aeguk Dkjdaori - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Credpfomhh Anex Adaei - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Cjdpfx Adsguk Dvjaeri Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) Credomhh Dzepfx Adaoi - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) Crjdpfsguk A Hsx Adaei 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Cjdpjmhhypefx Adajri Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.