Used laboratory equipment for sale (435)

Condition: used, This listing is for a Watson Marlow 520S Peristaltic Pump. (1 of 7 Available) The unit is in full working condition and is ready for immediate release. Peristaltic pumps are the simplest possible pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the Rcjdpfxexv A Uyj Ah Uok pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can operate dry without risk. Easy to install, simple to operate and inexpensive to maintain, peristaltic pumps are ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. Suitable for metering, dosing and dispensing applications. 520S drive offers manual control via a large-key membrane keypad: speed adjustment; run and stop; forward/reverse; "Max" key for rapid priming and purging. Supply voltage/frequency: 100-120V/200-240V 50/60Hz Flow rates from 4 micro-litres/min up to 2.4 liter/min Precise 2,200:1 speed control range from 0.1 to 220 rpm in 0.1 rpm increments Large speed/flow display and easy to use tactile membrane keypad. Incorporates keypad lock Manual control and flow rate calibration MemoDose for accurate single shot dispensing

Condition: used, This listing is for the Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever The unit is in full working condition and is ready for immediate use The ZG10U Wall Mount CO₂ Monitor by ZyAura is a professional indoor air quality monitoring device engineered for environments where accurate CO₂ measurement and ventilation control are essential. It utilizes advanced sensing technology and supports automated safety alerts for confined spaces. Key Features & Specifications CO₂ Measurement Range: 0–50,000 ppm (parts per million) Sensing Technology: Rodpfx Ahoxv A Dbj Ueck Dual Beam NDIR (Non-Dispersive Infrared) – ensures precise and stable long-term CO₂ detection Accuracy: ±100 ppm or ±5% of reading (whichever is greater) Temperature Monitoring: 0°C to 50°C (32°F to 122°F) Display: Large digital LCD that clearly shows ambient CO₂ concentration and temperature Alarm System: Audible and visual alerts with configurable alarm thresholds (AL1 and AL2) Relay Output: Controls external devices (e.g., fans or CO₂ generators) Output: 30 VDC or 250 VAC, max 2A, SPST, Normally Open Automatic Ventilation Control: Relay output can trigger ventilation (e.g., fan) in confined spaces based on CO₂ levels IP Rating: IP54 Splash Proof Protection for the Sensor Unit (SEU), excluding the backside when mounted on a wall SEU + RDU Modular System SEU (Sensor Unit) connects with up to 3 RDUs (Remote Display Units) via 7-meter communication cables Ideal for safety notices in multiple locations or rooms Remote units mirror real-time CO₂ and temperature data from the SEU Common Applications Offices and meeting rooms Classrooms and educational facilities Laboratories and research centers Industrial warehouses and storage units HVAC system integration for smart ventilation Installation Wall-mounted design (recommended ~0.45 m from the floor) AC adapter power supply (110/220 VAC) Easy relay connection to ventilation or safety systems Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer Redoxuiv Iopfx Ah Ueck The unit is in full working condition and is ready for immediate release. This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Rsdexuqmnopfx Ah Ueck Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Year of construction: 2025, condition: used, Merck Millipore Lynx ST Connector 1/2 in Fractional Triclover Code STC21THN01 Unused and in Original Packaging This is for 1 Unit although 50+ in stock Rcjdpfx Ajxv Afroh Uok Expiry Date: 31st August 2026 Sterilized fluid transfer systems containing tubing, connectors, clamps, valves, and disconnectors provide a critical link between disposable fluid paths and the various steps in your aseptic process, whether that is plastic-to-stainless or plastic-to-plastic. We offer three types of connectors and a crimping tool for sterile disconnection. We also can configure standard single-use assemblies with common types of commercially available tubing, such as platinum-cured silicone and C-Flex® 374 thermoplastic elastomer. Reliable and easy to use, Lynx® connectors feature unique designs that enable fluid transfer and maintain sterility. Lynx® connectors are available separately or as part of a complete assembly

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Rodpfx Aoxukh Eeh Ueck Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight Redpfexv Aavsx Ah Uock The unit is in full working condition and is ready for immediate release. This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance

Condition: used, This listing is for 1 of 2 Grant Instruments QBD2 Heatblock. The unit is in full working condition and is ready for immediate release. The Grant QBD / QBH series are a versatile range of high quality digital dry block heating systems with excellent temperature control and a wide choice of interchangeable blocks for maximum flexibility. The outstanding performance of the QBD / QBH series is based on advanced digital temperature control combined with high quality, precision-engineered blocks providing excellent thermal contact. The result is accurate, reproducible and safe heating of your samples. Redoxv Afxopfx Ah Usck Heating range ambient + 5°C to 130°C (all three QBD models) or ambient + 5°C to 200°C (QBH2). Rapid heat-up time. Stability and uniformity ± 0.1°C. Integral timer function optional external probe for in-sample or in-block temperature control. Robust, compact, contemporary design. Block extraction tool included as standard, for easy and safe removal of blocks.

Condition: used, This listing is for the CEM Smart Trac 11 System Details to follow Rcedpfx Aoxv Agijh Uok

Condition: used, This listing is for the Thermo Fisher Invitrogen E-Gel TM Power Snap Electrophoresis Device The unit is in full working condition and is ready for immediate use The E-Gel™ Power Snap Electrophoresis Device is a compact, all-in-one benchtop system that streamlines both DNA separation and gel visualization. Designed for fast, safe, and convenient electrophoresis, this system integrates the power supply, blue-light transilluminator, and amber filter in one unit—making it ideal for a wide range of DNA analysis workflows Key Features Streamlined Electrophoresis & Imaging: All-in-one system integrates gel running and image capture. Fast Separation: Run DNA samples in as little as 10 minutes using dry, precast E-Gel™ agarose gels. Rcjdpfexv Az Tsx Ah Uek Real-Time Visualization: View and capture DNA samples as they separate with integrated blue-light and amber filter technology. Instant Image Capture: The docked E-Gel™ Power Snap Camera allows high-resolution gel imaging without the need for external power or desktop connections. Benchtop Friendly: Small, fast, and powerful with a compact footprint for efficient and convenient use. Pre-Programmed Protocols: Built-in methods for all compatible E-Gel™ agarose gel types for a plug-and-play experience. Safe and Simple: Blue-light imaging avoids the hazards of UV light.

Condition: used, This listing is for a Schott Halogen HT2 Stirrer Hotplate The unit is in full working condition and is ready for immediate release. Key Features & Specifications While exact values for the “HT2” designation are not widely published, the listed SLR Halogen model gives a very good indication of typical performance: Heating surface: glass/ceramic top plate (≈16 cm diameter in one listing). Maximum plate surface temperature: up to ~500 °C. Stirring range: approximately 10 – 1,100 rpm (in one listing). Rcjdpfx Ahexv Aa Nj Usk Compact dimensions: one listing shows ~24 × 37 × 9 cm (W×D×H). k Suitable for use with a retort rod.

Condition: used, This listing is for a SAS Super80 Air Sampler The unit is in full working condition and is ready for immediate release. The SAS Super series (by SAS / Bioscience International, also referenced under other distributors) are impaction‑type microbial air samplers. They draw a known volume of air through a sampling head so that airborne microorganisms are impacted onto an agar contact plate (or Petri dish) for subsequent incubation and colony counting. Rodpfjxv Abaox Ah Ujck These instruments are commonly used in cleanrooms, pharmaceutical manufacturing, hospitals, and other controlled environments to assess airborne microbial contamination. Good combination of high airflow + relatively compact unit; allows efficient sampling of large volumes in minimal time. Wide usage and long track record (models from this family have been used since the late 1970s/80s) which implies reliability and a mature support ecosystem. Flexible head options (aluminium, stainless steel, resin), choice of plate types (contact plates or standard Petri dishes) in some variants. Strong traceability / data capture features, which are important for regulated environment

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Rcjdpexuu Hljfx Ah Uek Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. Rjdpfsxv Ab Hex Ah Ujck As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: used, This listing is for a Stuart Scientific SB301 Magnetic Stirrer The unit is in full working condition and is ready for immediate release. Overview & Intended Use Rjdpfxsxv Ac Dj Ah Ueck The SB301 is a robust, heavy‑duty magnetic stirring device designed for laboratory applications where relatively large volumes of liquid (up to around 30 L of water-equivalent) need to be stirred. It is used in chemistry, biology, environmental labs, or anywhere you need continuous stirring without introducing mechanical agitation (i.e. no overhead stirrer, no impeller). It emphasizes stable speed control, durability, and strong magnetic coupling (i.e. strong magnetic fields to drive the stir bar reliably even under load

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. Rodoxv A Sropfx Ah Usck The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Condition: used, This listing is for a Protein Simple Maurice IgG Purity Data The unit is in full working condition and is ready for immediate release Rcodpfxjxv A Ute Ah Usk ProteinSimple Maurice: Your Workhorse Station for Purity, Identity, and Heterogeneity Analysis Maurice innovates the conventional capillary electrophoresis technology to automate your protein profiling, either by size or charge. Need cIEF and CE-SDS data for your mAbs, ADCs, vaccines, or virus-like particles? Maurice does it all. Just pop in one of the preassembled cartridges, drop in your sample vials or a 96-well plate, and hit start. You'll complete your method development in a day and get high-resolution, reproducible data in minutes. Get compliant data with either Compass for iCE or Waters Empower software. Maurice is a cutting-edge capillary electrophoresis instrument designed for automated protein profiling. It is ideal for high-throughput analysis, providing reproducible and high-quality data with unmatched ease of use. This system is perfect for analyzing monoclonal antibodies (mAbs), antibody-drug conjugates (ADCs), vaccines, and virus-like particles.

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Rcedpfx Ahsxv Ad Ue Ujk Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: used, This listing is for a Julabo FL1201 Recirculating Cooler. The unit is in full working condition and is ready for immediate release. The recirculating coolers of the FL Series are suited for a wide range of cooling tasks:- Up to 20 kW of cooling capacity- Easy access filling from above- Feed pressure indicator (from FL1201) and level indicator- Large compensation volume- Permissible return temperature up to +80 °C- May be used with water, water-glycol, Thermal bath fluid Order No: 9 660 003 Model: FL1201 Working temperature range °C: -20 ... +40 Temperature:±0.5 stability °C: Pump capacity Flow rate / Pressure: l/min: 23 bar:1 Filling volume liters: 12 … 17 Rcsdpfxoxv Ar So Ah Usk Dimensions cm: 8W × L × H,50 × 76 × 64

Condition: used, This listing is for the Hach Radiometer Analytical MeterLab PHM240​ Rcjdpfx Aoxv A Adeh Uok The unit is in full working condition and is ready for immediate use The Hach Radiometer Analytical MeterLab PHM240 is a high-precision pH/Ion meter designed for both research and routine laboratory applications. It offers advanced features such as multi-point calibration, ion concentration measurements, and connectivity options for external peripherals

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Redpfx Ahoxv A Akj Ueck Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirer Rodpfsx Npnvex Ah Uock The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Routine solution preparation and titration support. Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: used, This listing is for the Ohaus Scout Pro Portable balance Sp4 The unit is in full working condition and is ready for immediate release The Ohaus Scout Pro SP4001 is an intuitive, durable portable electronic balance designed for a wide range of laboratory, industrial, and educational applications. This balance is easy to operate with minimal instruction and offers advanced features for precise and reliable weighing. Key Features: Simple Operation: The Scout Pro digital scales are incredibly easy to operate, featuring a high-contrast LCD display that ensures readability from any angle. Durable Design: Sealed front panel, molded spill ring, and a stainless steel platform protect the balance from spills and make it easy to keep clean. Multiple Weighing Units: Includes grams, kilograms, pounds, ounces, and a combined pound:ounce display. Switch between units with just the touch of a button. Multiple Application Modes: Enhanced Parts Counting: Allows for recalculating the average piece weight. Percentage Weighing: Ideal for comparing sample weights to a reference weight. Totalization: Allows repeated summation to the limit of the display, not just the capacity of the balance. Display Hold: Perfect for weighing large packages, only available in the Ohaus Scout Pro series. Weigh Below Hook: An integral hook allows for below-balance weighing, critical for density or specific gravity determination. USB/RS232 Connectivity: Features an easy-to-install USB or RS232 interface for quick data connection to a PC or printer, a feature unique to the Ohaus Scout Pro in this price range. Battery or AC Power: Powered by 4 AA batteries, offering up to 40 hours of operation with auto shut-off, or can be powered through the included AC power pack. Physical Lock Switch: The lock switch helps reduce operator error by locking the balance into a specific configuration. Security Bracket and Shipping Lock: Comes with an integral security bracket and a shipping lock to protect the weighing mechanism during transport. Specifications: Maximum Capacity: 4,000 g Readability: 0.1 g Pan Size: 5.6 in x 6.5 in (142 mm x 165 mm) Linearity: ±0.1 g Stabilization Time: 3 seconds Dimensions: 8.3 in x 2.1 in x 7.5 in (210 mm x 54 mm x 192 mm) Weight: 4 lb (1.8 kg) Power Supply: 4 AA batteries or AC adapter (included) Redpfexv A S Sox Ah Usck Construction: ABS housing with stainless steel platform Units of Measurement: g, kg, oz, lb, lb:oz, t, dwt

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Rodpfxoxup Nhj Ah Usck Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, This listing is for one of 2 Mettler Toledo Seven Excellence Multi parameter Metres The unit is in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Rcedpfxjxv Adbj Ah Uok Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.