Used Laminating installations for sale (29)

Condition: excellent (used), Year of construction: 2011, Stock Laminating "AHPL - On the Fly" Type: AHPL7 - On the Fly Year: 2011 Max. Size: 1620x1620 mm Min. Size: 500x500 mm Max. Speed: 10,000 sh/h with HP mode Carrier Sheets: N-F-E-B-C-EE-BB-EB-BC - Flute up to 7.0 mm Djb Hcswdrdvs Nnbecg Cardboard: from 0.5 mm Printing Sheets: Paper and Cardboard 120-800 g/m² Tolerance: A-Mode Accuracy Mode: +/- 0.5 mm HP Mode Continuous Mode - High Performance +/- 1-1.5 mm On the Fly Sheet Alignment Stacker: Stack Height 1800 mm - NON-STOP Stack Weight 2000 kg Sheet Feeder: NON-STOP - Imitation Sheet feeder Sheet exit height approx. 2750 mm Stack height 1500 mm Stack weight 2000 kg Pull lays left and right Side lay left on the B-side (HP mode) Pack turner: Pack height 80-120 mm in non-stop design

Condition: used, Year of construction: 1999, Tünkers VORWAERTS S 1450 Reference No.: CU-001369 Dcjb Hc Nnouuiz Robsg gluing machine 1999 Vorwaerst S 1230495/2 min. 200 x 280 max. 1400 x 1400 Conceal station 1230491/9 Press belt 1400 1230477/10 laminating station Substrate feeder automatic suction feeder Laminate feeder by hand Details with pressing roll Delivery on a table on stock located: Germany available: immediately

Condition: reconditioned (used), Year of construction: 2021, Functionality: fully functional, working width: 520 mm, compressed air connection: 6 bar, type of input current: three-phase, warranty duration: 12 months, UV and acrylic coating / varnishing machine for papers and carboards in perfect working condition, reconditioned by the manufacturer. Suitable for coating medias up to B2 format using UV or acrylic varnishes, and also capable of applying HP Indigo primers. • Cost effective, small footprint, sheet-fed flood coating and priming system • Easily apply UV, aqueous, specialty coatings and primers • Can be used inline or offline • Handles substrates up to 20.5” (520mm) wide and 30" long (760mm) • Provides coating control and speed adjustment on-the-fly with the color touch screen • Uses Solid State Digital UV lamp controller that permits infinite curing and temperature control, saving power and money • Eliminates the need for re-circulation of the coating – no waste! • Optional features include: high-pile feeders and stackers (accepts pallets/dollies), in-line conveyors, duplexer for 2-sided one pass coating/priming, IR drying, sheet detection (to prevent fires), Anilox coater, and corona treating • 2-minute coating change (no tanks to clean!) • Made in the USA - UV lamps : Solid state - variable UV 70-300 watts/inch - Speed : up to 200 fpm (60 m/m) - Sheets weight : 7pt to 30pt (140 to 600 g/m²) Coating : HP Primers - Soft touch - Writing/gluing - Dry erase - Silver/gold scratch off - Blister packaging - Non-skid/sand - Food grade application - Playing cards - White opaque Dcsb Hewhnfqsc Nnbeg Similar brands : TEC LIGHTNING - Harris & Bruno - Harris&bruno - BN Technology - BNT - Steinemann - Scodix - MGI Digital Technology

Condition: good (used), Year of construction: 2003, total width: 1,320 mm, Machine type: Roll-to-roll laminating machine for solvent-free adhesives, 1K or 2K. Manufacturer: NORDMECCANICA Type: Super Simplex SL Model: L 1300 Year of manufacture: 2003 Web width: 450 to 1,320 mm Laminating width: 430 to 1,300 mm Speed: Mechanical up to 200 m/min. For materials: BOPP: 12-80 µm BOPP metallized: 12-80 µm PET: 8-30 µm LDPE, LLDPE: 20-200 µm COEX: 25-200 µm ALUMINUM: 6.35-40 µm Dcjbjv E D Udo Hc Nnbsg BOPA: 8-25 µm NYLON CAST: 15-80 µm PP CAST: 25-150 µm EVOH: 12-20 µm PVC: 20-500 µm COATED PAPER: 30-80 g/m2 Composites of the above materials up to 250 µm Unwind 1: Roll weight up to 1,000 kg Roll diameter up to 1,000 mm Core diameter 76 / 152 mm Side edge control Pretreatment Corona AFS AVE 150 D Unwinder 2: Roll weight up to 1,000 kg Roll diameter up to 1,000 mm Core diameter 76 / 152 mm Side edge control Corona AFS AVE 150 D pretreatment Rewinder: Roll weight up to 1,000 kg Roll diameter up to 1,000 mm Core diameter 152 mm Material thickness up to 550 µm Approx. 10 pneumatic clamping heads Approx. 10 cones Web tension: 40 to 550 N Web break monitoring Machine dimensions: Approx. 6 x 3 x 4 m high Cooling unit Infeed carriage Various coating cylinders Various spare parts Condition: Used. Now installed and in production. In good condition, according to current operators. The original price in 2003 was CHF 620,000. Availability: Approx. April 2025, or by mutual agreement. Prices are in euros, ex works, excluding Swiss VAT; no Swiss VAT and no Swiss customs duties for exports from Switzerland. The specifications are provided by the current operators and manufacturers of the systems, to the best of our knowledge, without guarantee; the goods are sold in their current condition without warranty. Payment is due 50% upon order and 50% before dismantling by the buyer; bank transfer fees are borne by the buyer. Severability clause: If individual provisions of this contract become invalid or unenforceable, the remaining provisions of this contract shall remain in effect. This contract is governed by Swiss law; the Vienna Sales Convention (CISG) is excluded. The place of jurisdiction is Pfäffikon, Zurich, Switzerland.

Condition: ready for operation (used), Year of construction: 1984, Minimum sheet size: 210mm/300mm, maximum sheet size: 1180mm/1600mm, production speed: 45m/min, paper weight range: 80g-600g/m², total machine length: 11000mm, total machine width: 3500mm. An on-site inspection is possible. Djb Hov T Apvoc Nnbecg

Condition: excellent (used), Year of construction: 2016, Suction cup feeder from above of the printed sheet Introduction of the support sheet with vacuum belts Automatic set up system with sheet gauge and automatic positioning of rollers and formats Dcebev Urtyo Hc Nnbog Laminating unit Pressure belt Batch turner High pile delivery with non stop system Top printed sheet from 200 gsm up to 400 gsm Bottom corurgated board sheet : F-E-B-C - EE-EB-BC flutes Max sheet size 1650x1650 mm. Min sheet size 500x500 mm.

Condition: good (used), Year of construction: 1995, Stock drum bucket + press belt Debsu Ucluo Hc Nnbjcg Type: SFAM 712_G Year: 1995 Max. size: 1650mm Press belt Tünkers

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Dob Hcjipvhno Nnbecg

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Year 2007 In Production UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Laminating unit with heated chrome cylinder ICS Heating unit Sheet separating unit Pile delivery unit Usable working width (mm): 1020 Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Mechanical speed: m/min. 70 Dcob Hcjv Tbfis Nnbjg Size: 102mm x 116mm min 30 x 28 cm speed up to 70 m/min The machine is functional, operational, ready to work.

Condition: new, Year of construction: 2024, Technical SpecificationsFeeding: Automatic feederMaximum pile capacity: 60 CMMinimum sheet size (wide x length): 220X250Maximum sheet size (wide x length): 550X790Maximum speed: 25 m/min (3.400 sheets/h)Film thickness: from 20 to 42 microns OPPPaper thickness: from 130 to 400 gr/sqmHeating system: international oil heated roll (up to 140?C)Roller preassure: pneumaticConnection - Consumption: 400V 3 phase - 8 kWMaximum pile height: 650 mmInstalled power: 7 kWVoltage: 380 v triphasic 50 HzSafety: Protection according to CE norm, emergency stops and safety sensors Deb Hc Norvn Econbscg

Condition: ready for operation (used), Year of construction: 2000, Application: Dispersion adhesive and thermal film lamination, min. sheet size: 210mm/210mm, max. sheet size: 1000mm/1420mm, max. pile weight: 900kg, paper weight range: 50g-600g/m², film thickness range: 12µm-70µm, film type: BOPP/acetate, adhesive quantity: approx. 8g-30g/m², lamination speed: 50m/min. Including sheet feeder A-20 with Mabeg suction head, powder removal, smoothing calender, sheet separator TM-3 and pile delivery S-4. Documentation available. On-site inspection is possible. Dob Hcov T Ap Ae Nnbjcg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, working width: 2,100 mm, total width: 3,500 mm, total length: 36,000 mm, A machine for register-accurate laminating - only used in one layer - Year of construction 2015 max. size: 2,100 x 2,100 mm min. Size: 700 x 700 mm Carrier sheet: - one-sided corrugated board, B/C, E/B, E/E, E/F, B, E, F. - Two-sided corrugated board up to 7 mm thick Djb Hcsrwi Eme Nnbecg - Cardboard from approx. 0.5 mm thickness Cover sheet: - Cardboard from 100-800 g/sqm Tolerances: approx. +/- 0.5 mm for front and side edges Output: up to max. 3000 sheets/h with 2 people (depending on size and alignment) Sheet feeder: - Pile height max. approx. 1,400 mm - Pile weight max. 1,000 kg Sheet turner Sheet stacker Voltage: - 230/400 V, 50 Hz - Connection 3x 65 A - Control voltage 24 VDC Control: Siemens SPS 7 control

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm Dceb Hc Nnjtru Hzjbog - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 - Package turner (forks) with non-stop device, type 8 - Pile stacker with non-stop roller carpet, type 7 Technical data: Working width: 1500 mm Max. Sheet width: 1420 mm Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, Functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Dsb Hcsvy Aips Nnbscg Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: good (used), Year of construction: 2018, Functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min Dceb Hc Neu Upuponbjg COATED WEB BOPP 12 - 80 μ PETP 10 - 30 μ LDPE, LLDPE 30 - 200 μ OPA 12 - 18 μ NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 60 - 150 μ PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ PETP 8 - 30 μ LDPE, LLDPE 20 - 200 μ OPA 12 - 18 μ NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 20 - 150 μ COEX FILM 25 - 200 μ PAPER 40 - 150 gr/m2

Condition: used, Year of construction: 1960, We are closing the production line for decorative paper used in furniture production, including finish foils and paper edges. The entire equipment listed below is now available for sale. Prices are negotiable. For more information or to make an inquiry, please contact us via email or phone. 1. Cerutti Printer + Rewinder + Laboratory Printer Cerutti Printer Year of manufacture: 1987 Control software: No data, manual control Working width: 600 mm to 2200 mm Number of printing columns: 4 Dryer type: Electric Speed: 120 m/min Unwinder: 2-axis Winder: 3-axis Approximately 50 printing cylinders available Automatic ink mixing system Rewinder Year of manufacture: 2010 Working width: Up to 2200 mm Rewind roll diameter: Up to 1000 mm Speed: Up to 300 m/min Automatic web guide system, three cutting knives Shaft diameters: 76 mm and 152 mm Laboratory Printer Year of manufacture: 2018 Control software: LENZE Working width: Up to 730mm Number of printing columns: 4 Dryer type: Oil (one converted to electric) Speed: 100 m/min Shaft diameter: 76 mm 2. Impregnator + Related Equipment Manufacturer: Vits Year of Manufacture: 1970s Working width: 600 mm to 2100 mm Control software: Manual Dryer components: 2 dryers, each 10 m long Installed components: Impregnating tank, varnishing station Dryer medium: Oil, heated by a gas furnace Working speed: Impregnation: 12-17 m/min, Varnishing: 40 m/min, Maximum mechanical speed: 50 m/min Resema Cutting Machine Cuts paper rolls up to 600 mm in diameter, with a 152 mm core Kacper Edge Cutting Machine Edge cutting width: 700 mm Automatic web guide system Available knives and sleeves for cutting widths from 16 mm to 60 mm Unwinder and winder shafts: 152 mm Hardo Edge Gluing Machine For applying hot-melt glue to edges, can process up to 4 rolls simultaneously Speed: 35 m/min Power supply: 400V 1 complete unit, 2 units for parts Rewinders for Edges Programmable rewinding meters - 6 units 3. Film Embossing Machine + Related Equipment Dob Hc Nsv Dxfbsnbjcg Full documentation available separately 4. Laboratory Press Year of manufacture: approx. 2015 Heating method: Electric, 400V Maximum temperature: 250°C Cylinder diameter and stroke: 100 mm (distance between press plates) Maximum hydraulic pressure: Not available Heating plate dimensions: 320 mm x 320 mm 5. Other Laboratory Equipment Laboratory dryers: BINDER, up to 300°C Microscope Platform scale: 2000 kg 6. Reactors, Mixers Water-heated jacketed mixer (new), capacity: 1500 l, 400 W Dispersion mixer with two stirrers and interchangeable tanks: 2 x 500 l and 1 x 100 l, speed: 800-1200 rpm, rotor diameter: 270 mm, 400V Slow-speed mixer with two stirrers, capacity: 2000 l Storage tanks: 2 tanks, capacity: 30,000 l For more details or to schedule a viewing, please contact us via email or phone.

Condition: ready for operation (used), Year of construction: 2021, A complete laminating line is available. General data: Fabric weight range: 125g/m²-1800g/m², fabric width range: 1050mm-3200mm, upper roller width: 3400mm, creep speed: 2m/min, creep speed: 10m/min, production speed: 100m/min, total system length: 28100mm. 1) Fabric storage infeed and outfeed Suchy, year of construction: 2012, roller width: 3400mm, guide roller diameter: 200mm, max. fabric thickness: 20mm, max. fabric width: 3200mm, fabric storage: approx. 50m, operating speed: 60m/min, machine dimensions X/Y/Z: approx. 4200mm/5550mm/3600mm, weight: approx. 4250kg. 2) Powder control Klieverik, scattering roller width: 3500mm, scattering roller diameter: 188mm, max. scattering width: 3200mm, max. scattering capacity: 2000g/m/min, powder size range: 100µm-600µm, machine dimensions X/Y/Z: approx. 4750mm/600mm/700mm, weight: approx. 1100kg. 3) Laminating machine Klieverik, year of construction: 2012, printing blanket dimensions X/Y/Z: 7310mm/3500mm/7mm, heating power: 100kW, heating cylinder diameter: 760mm, thermal oil tank: 800l, max. working temperature: 240°C, heating time at 3m/min and 6m/min: approx. 2h/3h, machine dimensions X/Y/Z: approx. 2100mm/5000mm/2300mm, weight: approx. 9000kg. 4) Winder Tekatex WL-35, year of construction: 2022/2023, working width: 3500mm, machine dimensions X/Y: 4500mm/1050mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible. Dsb Hc Nev R Ex Isnbecg

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Dcob Hsud Axgoc Nnbjg

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, working width: 1,650 mm, Stock laminating machine - semi-automatic Type: A134RS. 1650x2000 Year 1998 Dsbjtqzqhj Hc Nnbscg Max.size: 1640x2000 mm Min. size: 450x450 mm Cardboard: 100-800 g/sqm Corrugated board: 300 g/sqm - 7.0 mm thickness

Condition: good (used), Year of construction: 2017, working width: 1,450 mm, 1450 Automatic backlapping machine Automatic sheet feeder Automatic carton feeder Djb Hcjurivvj Nnbscg Automatic register with servo motor Output blanket

Condition: ready for operation (used), Year of construction: 2008, A Klett laminating machine specially designed for precise 0-register lamination with a tolerance limit of +/-0.5mm and automatic format changeover is available. The machine was overhauled in 2013. Minimum format: 500mm/500mm, maximum format: 1650mm/1650mm, maximum laminating capacity: 3500 sheets/h, paper and solid board weight: 120g-700g/m², corrugated and solid board thickness range: 0.75mm-8mm, control: Siemens S7. System components: Feeder for sheet material, feeder for carrier material, laminating unit (Klett 165-165 ZERO), press station, bundle station, bundle turning station (flip-flop), non-stop feeder and caliber adjustment. Documentation available. On-site inspection is possible. Dsb Hjvtb Epjc Nnbocg

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, working width: 2,050 mm, Stock laminating machine Type: A-14R55A6L7N8N/2050P Year 2016 Max. size: 2050 x 2050 mm Min. size: 500 x 500 mm Print sheet thickness: 100-800 gr. Tolerance: +/- 0,5mm Carrier sheet thickness: Deb Hc Nouwntrenbocg Cardboard from 350 gr. (0.5 mm upwards) Corrugated board up to 7.0 mm Solid board up to 2.5 mm - Flush laminating machine - Pile turner

Condition: ready for operation (used), Year of construction: 2007, A complete Olbrich adhesive coating and laminating line is available. Roller diameter: approx. 300mm, infeed floor height: 1000mm, outfeed floor height: 1200mm. Including drum melter and pump unit. On-site inspection is possible. Dsbevw Aqzj Hc Nnbocg

Condition: ready for operation (used), Year of construction: 1995, Tünkers automatic laminator S 1100 BJ 1995 Max 1100x1650 - Min 200x280mm Dsb Hcjp I T Uqe Nnbscg Fully automatic Sheet/sheet laminating machine consisting of the following components: Suction sheet feeder for carrier sheet SBE-P 1100 Gluing station forward Vacuum transport belt Laminating station Cover sheet feeder DBE 1100 Pressing station 1100-H Weight backing material min. approx. 250g/m², max. thickness approx. 12 mm Weight of cover material 80-800 g/m² Laminating accuracy /- 0,25mm

Condition: ready for operation (used), Year of construction: 2019, An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible. Dcjbjvrip He Hc Nnbjg