Used packaging machines for sale (11)

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Chjlhjw R Eh Hecdwvod Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Year of construction: 2002, condition: good (used), Complete fully automatic 12 cup filling/sealing machine (brand Mengibar) Chelhcoih Sa Djdwvod Till beginning of 2022 operational.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. Chslhcovubapedwvjd The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Year of construction: 1997, condition: excellent (used), PEWOPACK 450 SN is a stretchbander with electronic/pneumatic controls to produce single packs or muliple collations. It is designed for stacking of carton boxes and packing them into shrinking foil. Output max. 60 cart/min Folientyp: PE Cholhcody U Ausdwvod Width of foil 50 - 450 mm Foil thickness 0,025-0,100 mm Diameter of the roll max. 300 mm

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Sold as seen Celhcdwsv S Eurjvjhd

Condition: used, Year of construction: 2007, functionality: fully functional, ROMACO CARTONING MACHINE, MODEL PROMATIC P91 Year of construction: 2007 Horizontal cartoning machine for various uses. feeding system (automatic or manual) located upstream of the cartoner • the feeding system deposits the product on the drawer chain, which transports it with an alternating movement to be inserted into the carton • the mechanical pusher feeds the product into the carton using a mobile channel hopper • the packaged carton is completed by closing the flaps as it moves towards the exit side. The carton is removed only when the correct product is present TECHNICAL DETAILS: Electrical characteristics: 400 V - 50 Hz • Phase: 3/N/ PE - 6 b • Weight: 2,000 kg Celhow Sk Tdscdwvehd

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. Chjlhcdjr Nv Icewved - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station - Cooling station after sealing - Index after sealing - Embossing station -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm

Condition: used, Year of construction: 2016, functionality: fully functional, IMA CASE PACKER, MODEL CP18 Year of construction: 2016 Machine suitable for different production needs, ideal for packaging pharmaceutical items. - equipped with a horizontal case magazine for easy loading - the machine keeps the case erect during product insertion with the aid of suction cups fitted to the pick-up - all the parts of the machine can be reached from the operator’s side Colhcdew Skxgswvehd - can be equipped with optional groups and features such as: case overturning, product tracking and camera detection devices. Can also be fully servo driven PRODUCTION CHARACTERISTICS Output: 8 cases/min CASE DIMENSIONS Min: 220 x 120 x 120 mm Max: 600 x 400 x 350 mm

Year of construction: 1999, condition: reconditioned (used), functionality: fully functional, A used and overhauled blister machine, model UPS1030 ET (94/125) Technical data - Format range Feed width maximum 142 x 255 mm Form depth maximum 10 mm - Output at least 15 cycles/minute - Output maximum 70 cycles/minute PVC - Output maximum 50 cycles/minute ALU Includes: - Form film roll carrier with two tension shafts, for maximum roll diameter 800mm, electromechanically foldable, including cutting and gluing table, painted neutral grey - Continuous conveyance of the form material with a contactless loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum form film with 4-column guide system - electr. Preparation for pore and crack detection (Visio-Scan) - Clamping pliers for securing the forming film in the forming station when the machine stops - Servo-controlled feed after the forming station, film shrinkage compensation guaranteed - Contact cooling with servo-controlled feed - Cooling water connection for upper and lower forming tool and lower sealing tool - Deflection with compensation pendulum - Filling section, approx. 1900mm with slanted brush and safety flap - Electrical preparation SimTap 2.i and brush feed - Sealing station for plate sealing and toggle lever drive, with 4 column guide (reinforced version with tuning domes) - Overload protection in the sealing station - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted on the back of the machine with 2 pneumatic tension shafts core diameter 76mm - Deflection shoulder for cover film with pressure presence control Cjlhjr Ii R Uocdwvjhd - Stretching station for cover film with touch probe controlled Stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Punching station, adjustable, including blister lowering - Waste cutter with integrated feed for immediate cutting from the waste grid - Compressed air monitoring - Sliding door panel, protective doors electrically switched for emergency stop when actuated 2-channel, made of plexiglass, hinged hood in the transfer area - Switch cabinet hinged on the back of the machine Mains 400/230 volts, 3/N/PE 50 Hz with neutral conductor and separate earthing. The stations were completely overhauled and the discontinued parts were replaced at the time of the overhaul. - Schneider PacDrive3 system with Pac2Touch - Machine paintwork RAL 9007 - Linear translator with: o Lowering unit in the punching station o Good blister outlet below the punch with slide rails o Individual vacuum translator o Individual ejection with ejection counter control o Collection belt with separate drive o Transfer belt o Good blister clearer when the following machine is at a standstill - CE conformity with declaration of conformity - Two sets of operating manuals

Year of construction: 2006, operating hours: 7,201 h, condition: good (used), functionality: fully functional, machine/vehicle number: 103/141, Clocked Uhlmann C 2155 cartoning machine with accumulation belt for bottles - Optical packaged goods scanning - Folding carton magazine for holding approx. 450 folding boxes - Rotary folding box feeder Folding carton transport - Packaged goods insertion - Servo-controlled insertion of the products - Servo-controlled overload protection in case of insertion fault Folding carton closing station for tuck-in closure with offset tuck-in flaps - Closure in 3 work steps during the during the resting phase of the folding carton transport - Pack discharge Machine projection 370 mm Quick and tool-free format changeover: - Control functions: - The machine stops if the packaged goods - bottle - are missing, leaflet is removed and only inserted in combination with inserted in combination with a bottle. Chelhcevkduuedwvsd - If there is no leaflet, no carton is pulled out - Adjustable series error with machine stop - Monitoring of the working position of the cover rail Operation - Simple machine operation and parameterization via graphical user interface - Access control via authorization system (user group and password) - Fault message display with integrated remedial recommendations - Language switching German/English, German/French or German/Spanish. Other languages optionally available. Maximum 120 bottles/min. - Bottle size: Diameter Height min. product dimensions: 20 mm x 50 mm max. product dimensions: 65 mm x 145 mm (Cylindrical part min. 25 mm long) - Folding box size: min.: 30 x 15 x 63 mm max.: 115 x 90 x 150 mm

Condition: good (used), Year of construction: 2007, operating hours: 27,500 h, functionality: fully functional, machine/vehicle number: 069/530, Uhlmann blister packaging system UPS 4 ETX for processing PVC forming films and aluminum cover films Basic machine in modular technology and Celhcdjvn R Ehswvjhd balcony design, with 12 modules: - Forming film holder with 2 pneumatic tension shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for forming film - Forming film unwinding, timed - 3-zone contact heating: - 6 heating circuits, individually adjustable - simultaneous heating of min. 3 feeds - Heating plates open automatically when machine stops - Forming station with 4-column lifting table guide - Clamping pliers for securing the film strip when machine stops - Filling section with safety flap, length 1,360 mm - Covering film unwinding on operator side with pneumatic tension shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns Lifting table guide: - integrated overload protection - automatic lifting of the upper sealing tool when the machine stops - Cooling station - Free module for installing an additional station - Clamping pliers feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punch grid - Monitoring of the compressed air supply with machine stop if the minimum value is not reached - Machine cover - Electromechanically locked protective doors on the operating side made of acrylic glass with individual identification for open doors/ hoods and display in the operating panel - Protective covers made of corrosion-resistant material - Fast format change thanks to: - Plug-in format parts - Plug-in connections for cooling water supply