Used paternosters & storage lifts for sale (95)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Kardex Shuttle XP 500 4050x813, built in 2018, in very good condition. The unit has trays measuring 4,050 mm wide and 813 mm deep, with a total of 50 trays. External dimensions of the Kardex: Height: 6,450 mm Width: 4,380 mm Lodpfx Ahsv Su Smo Soah Depth: 2,921 mm Tray dimensions: 4050 x 813 mm Load capacity per tray: 490 kg The machine has been disassembled and palletized.

Condition: good (used), Year of construction: 2014, Manufacturer: Hänel Type: Lean Lift Year of manufacture 2014 Device dimensions: Lodpfx Ahjvt Euzo Seah H 6302mm approx. W 2805 mm D 2810 mm Shelf 40 pieces up to 400kg per container H 57mm D 825mm W 2460mm Total load: 40,000kg (2×20,000kg)

Condition: good (used), Year of construction: 2009, Megamat FSE Lift Type: FSE 7.1 2448/612-4260 Serial no.: 500002883 Year of manufacture: 2009 Unit height: approx. 4260 mm Unit width: approx. 2850 mm Unit depth: approx. 2400 mm Lasdpfxoyxyxqj Ah Soh Number of trays: 33 Tray width: approx. 2670 mm Tray depth: approx. 816 mm Maximum tray load: 400 kg Total load capacity: 70,000 kg Colour: beige

Condition: new, functionality: fully functional, Equipment: safety light barrier, Replacement controller for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" control systems, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit storage systems of all manufacturers and types. The storage systems can remain fully loaded for the conversion. We can also provide special solutions as well as software connections. Lodpjq Rcmtjfx Ah Seah

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kardex Shuttle XP 500, dimensions 1850x864, year 2010, in very good condition. Laedpfezpw H Rox Ah Seh The unit features trays that are 1,850 mm wide and 864 mm deep. It has a total of 35 trays. External dimensions of the Kardex: Height: 6950 mm Width: 2780 mm Depth: 3074 mm Tray dimensions: 1850 x 864 Load capacity per tray: 350 kg

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, total height: 6,000 mm, total width: 1,750 mm, total length: 2,820 mm, load capacity per storage section: 500 kg, construction width: 1,300 mm, warranty duration: 12 months, – Tabular control panel with item management – Unit comes from a lift system – Side lift shaft cladding reproduced – 2 units available – 1300x825mm tabular panel, 500kg payload each Ledszaqibjpfx Ah Soah

Condition: good (used), Year of construction: 1999, functionality: fully functional, Max. tabular load: 250 kg Max. total load: 20,000 (2 x 10,000) kg Number of seats: 45 Laodpszl Tn Aefx Ah Soh

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Max. load capacity per tray: 170 kg Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V 10A, fuse 16A Lajdpfx Ahjyhxkms Seh Condition: good Availability: immediately Location: BG-8800 Sliven

Condition: good (used), KARDEX SHUTTLE Model No.: XP-500-2450X813 Configuration: H/N55/N22D18B/N75D20/20 Permissible total load capacity: 2 x 33,200 kg 28 compartments Approximate dimensions (W x H in mm): 2,770 x 7,000 Lsdpjzr N H Isfx Ah Ssah

Condition: good (used), Kardex Type: SYS - 250-4010-5-13 Device No.: 26596 Year of Manufacture: Device height: approx. 6000 mm Device width: approx. 3000 mm Laodpezk Ew Hjfx Ah Ssh Device depth: approx. 1100 mm + 350 mm tabletop Number of trays: 40 Tray width: approx. 2500 mm Tray depth: approx. 410 mm Tray height: approx. 230 mm Tray load capacity: 150 kg Total load capacity: 6000 kg Color: Gray Device C in the photo.

Condition: good (used), Kardex Type: IND 400 Equipment No.: 25377 Year of manufacture: Equipment height: approx. 6000 mm Equipment width: approx. 2920 mm Equipment depth: approx. 1100 mm + 350 mm tabletop Number of trays: 34 Tray width: approx. 2250 mm Tray depth: approx. 350 mm Tray height: approx. 260 mm Load per tray: 257 kg Laedpfezk Ewgjx Ah Ssh Total load: 8738 kg Color: Gray Equipment A in the photo.

Condition: good (used), Kardex Type: IND 250-4010-5-13 Equipment No.: 122/25922 Year of Manufacture: Equipment height: approx. 6000 mm Equipment width: approx. 3000 mm Equipment depth: approx. 1100 mm + 350 mm tabletop Number of trays: 40 Tray width: approx. 2500 mm Laedpfx Ahezk Ewyo Sjh Tray depth: approx. 410 mm Tray height: approx. 230 mm Tray load capacity: 195 kg Total load capacity: 7500 kg Color: Gray Equipment B in the photo.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total height: 8,025 mm, total width: 3,405 mm, total length: 2,810 mm, load capacity per storage section: 250 kg, construction height: 50 mm, warranty duration: 12 months, Equipment: safety light barrier, Table preselection control with article management. Device comes from a lift system. Side shaft claddings have been retrofitted. No side access door. 4 units available. Machine height is adjustable. Storage lift including delivery, installation, DGUV acceptance & warranty. Ledpfx Aew S Udyeh Seah

Condition: reconditioned (used), modernized machine with new LTG StoreControl L control system currently 6 identical machines available External dimensions: Overall height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total load capacity of the machine up to 2 x 15,000 kg 63 supports with a central web for up to 400 kg load each in the clear internal dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the opening at 875 mm above floor level, then 875 mm high Motor power: Lsdpfxod Sphij Ah Sjah Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Color: gray/blue Surface cleaned, signs of use possible Subject to errors and technical changes, as well as minor deviations in photos. Delivery and installation are currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Width vertical lift module / tray: 2,980 mm / 2,650 mm Depth vertical lift module / tray: 3,074 mm / 864 mm Number of trays: Approx. 21 trays per lift Lasdpfxewl Inmo Ah Soh Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Condition: used, functionality: unexamined, The shuttle warehouse features multiple storage levels, allowing for fully automated storage and management of pallets. The pallets are transported into the warehouse via the existing conveyor system and assigned to their respective storage locations by the shuttle system. The multi-level design ensures optimal utilization of the available storage space. The system enables rapid and automated retrieval of pallets for dispatch, which streamlines logistics processes and reduces waiting times. The system is particularly suitable as a buffer warehouse between production, palletizing, and loading, ensuring a continuous flow of materials. Scope: • Fully automated shuttle warehouse • Multiple storage levels for Euro pallets • Infeed and outfeed technology • Associated conveyor technology • Control and system technology (where applicable) Functionality unverified, but was in use until recently. ATTENTION: Mobile, small peripheral equipment is not included in this item. Please contact us if you have any uncertainties regarding the scope before placing a bid. We strongly recommend inspecting the item! Ljdpfx Ahezvc S Ej Soah If interested, please contact us by email!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. We ask for your understanding Lsdpjuriwgofx Ah Seah

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. Lasdpfx Aheff Huws Seh • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/20-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Lsdpfx Ahjxyygus Soah Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Lasdpfxoxr Ng Ue Ah Seh Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: used, Year of construction: 1989, Gewinner Euromat Laedpfx Asya Dkleh Sjh Type: Gewinner Euromat Machine No.: 120-50508-18 Year: 1989 Machine height: approx. 5600 mm Machine width: approx. 3300 mm Machine depth: approx. 1450 mm + 330 mm table top Number of trays: 18 Tray width: approx. 2450 mm Tray depth: approx. 520 mm Tray height: approx. 500 mm Compartment load capacity: 510 kg Total load capacity: 9100 kg Colour: Beige front / corners blue

Condition: reconditioned (used), modernized machines with new LTG StoreControl L control system one more machine available out of a previous total of 2 External dimensions: Overall height 6,000 mm Overall width 1,630 mm Overall depth 2,980 mm Lajdpfxjn D A Rrj Ah Soh 30 carriers, each with a load capacity of 500 kg in the clear internal dimensions: W = 1,300 mm D = 863 mm H from 50 to 750 mm Total load capacity up to 40,000 kg Start of the operating opening at 870 mm above floor level, then 845 mm high Color: GRAY / BLUE, carriers sendzimir galvanized Surface cleaned, signs of wear possible Performance data: Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.29 kW / 400 Volt additional extras: Lift door, manually operated Subject to errors, technical changes, and minor deviations in the photos Delivery and assembly currently mainly in Germany, Austria, and other neighboring countries.

Condition: good (used), KARDEX SHUTTLE Type No.: 250-1650x825-NT Permissible load: 2 x 10,000 kg Lodpfx Ahezr N Nio Seah 26 compartments Compartment load: 250 kg Dimensions W x H: approx. 2.00 x 4.90 m

Condition: ready for operation (used), Year of construction: 1991, A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible. Ljdpfow I E Dcox Ah Seah

Condition: good (used), Year of construction: 2004, Megamat Type: FSE 3.5 2448/816-3785 Machine no.: 35.0352 Year of manufacture: 2004 Machine height: approx. 3,785 mm Machine width: approx. 2,640 mm Machine depth: approx. 2,710 mm Number of trays: 20 Tray width: approx. 2,240 mm Tray depth: approx. 820 mm Tray height: approx. 55 mm Ljdoytf U Ejpfx Ah Sjah Tray load capacity: 307 kg Total load capacity: 70,000 kg Colour: white