Used pumps for sale (604)

Condition: used, Year of construction: 2022, Atlantic type 067 (Atlantic 6) Glass Washer. Serial no: 3599 (RC 2022) with circa 2500mm Assembly Rack Dcodpfxe Afw Epj Apmep Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: excellent (used), Year of construction: 2022, Wangen Twin NG70 Screw Pump Dcsdpfxszt Ibgo Apmjp 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h Dsdpfx Ae Aibq Njpmocp • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: like new (used), Year of construction: 2019, Sundyne HMD Kontro 1.5x1x6 Sealless Magnetic Drive Centrifugal Pump Sundyne HMD Kontro magnetic-drive centrifugal pump for industrial process and fluid-transfer applications. The sealless magnetic-drive design is intended for applications where minimising the risk of process-fluid leakage is important. Technical details - Manufacturer: Sundyne HMD Kontro - Type: Magnetic-drive centrifugal pump - Size: 1.5 × 1 × 6 - Material of construction: 316L - Condition: Brand New Suitable for consideration by chemical, pharmaceutical and general process industries, subject to the specific liquid, temperature, pressure and materials requirements. Dsdpo Ad N Awefx Apmjcp Sale details - Equipment available from Ireland - International enquiries welcome - Price: On request - Inspection and additional photographs available on request Please enquire for the full specification, condition report and quotation.

Condition: used, Year of construction: 2015, functionality: fully functional, KSB ETANORM GPV 150-125-250 GG INDUSTRIAL PUMP – VERTICAL CENTRIFUGAL PUMP, 200 m³/h Original KSB Etanorm GPV 150-125-250 GG centrifugal pump from the German manufacturer KSB, designed for industrial process systems, pumping systems, and liquid circulation. The robust vertical design with a volute casing and extended shaft allows the pump to be used in process tanks and industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump. Manufacturer's code: PV 150-125-250 GG. TECHNICAL SPECIFICATIONS Manufacturer: KSB Aktiengesellschaft – Germany Model: ETANORM GPV 150-125-250 GG Type: industrial, centrifugal, single-stage pump Design: vertical, tank-mounted, with volute casing Nominal flow rate Q: 200 m³/h (200,000 l/h) Head H: 20 m Rotational speed: 1477 rpm Impeller diameter: 255 mm Pump nominal size: 150-125-250 Material: GG – cast iron Year on nameplate: 2015 Stock designation: No. 1462 Condition: used, without electric motor Hydraulic data matches the pump nameplate. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, KSB brand ADVANTAGES AND CHARACTERISTICS Original pump from a renowned industrial equipment manufacturer. High flow rate – 200 m³/h. Vertical design for installation in tank systems. Robust volute casing and centrifugal impeller. Flanged connections for process systems. Can be used as a replacement pump or a source of KSB spare parts. Design intended for use in industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, other type. APPLICATIONS OF THE KSB ETANORM GPV PUMP Industrial pumps from the Etanorm GPV series are used in: industrial and production plants, liquid circulation and transport systems, process and technology tanks, Dsdpfx As Aia E Eepmjcp industrial washing systems, flushing and degreasing systems, surface treatment systems, technological water circulation systems. Selecting the pump for a specific medium requires checking the material compatibility and operating parameters. TECHNICAL CONDITION – USED PUMP The offered KSB Etanorm GPV 150-125-250 pump comes from an industrial plant. The unit has traces of use and storage, including local corrosion on the impeller, shaft, and flange surfaces. The pump is equipped with a volute casing, impeller, shaft, vertical column, and mounting elements visible in the photos. The stock designation has the inscription "Einsatzbereit" (ready for use). The pump is functional after service in Germany.

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, For sale: KSB Sewabloc K 65-250 G V industrial pump with a 2.2 kW electric motor. Centrifugal pump, monobloc design, with flanged connections. Data from the nameplates: Manufacturer: KSB Model: Sewabloc K 65-250 G V Dceds Aibg Hjpfx Apmsp Year of manufacture: 2012 Nominal flow rate: 6.22 l/s, approximately 22.4 m³/h Head at the nominal point: 8.05 m Motor power: 2.2 kW Power supply: 230 V Δ / 400 V Y, three-phase Frequency: 50 Hz Pump speed: 1455 rpm Impeller diameter: 170 mm Motor protection rating: IP55 Motor efficiency class: IE2 Unit weight according to the nameplate: approximately 103 kg Condition: used. Visible signs of use, localized paint chipping, and superficial surface corrosion. Appearance matches the photos. NOTE: THE STATED PRICE APPLIES TO ONE UNIT – ONE PUMP WITH MOTOR.

Condition: used, Year of construction: 2021, functionality: fully functional, KSB ETNV 100-080-315 INDUSTRIAL PUMP – VERTICAL SUBMERSIBLE ETANORM V Original KSB centrifugal pump | German production | Year 2021 | Robust industrial design For sale is a KSB ETNV 100-080-315 vertical industrial pump from the Etanorm V series, manufactured by the renowned German company KSB. This submersible pump is designed for technological installations, industrial tanks, and liquid transport and circulation systems. Its design with an extended shaft allows for vertical mounting with the drive located outside the pumped medium. The unit finds application in industries, production plants, cooling systems, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Manufacturer’s code: ETN-V-100-080-315 TECHNICAL DATA OF THE KSB PUMP Manufacturer: KSB SE & Co. KGaA – Germany Model: ETNV 100-080-315 Series: KSB Etanorm V Design: GGSD Year of manufacture: 2021 Impeller diameter: Ø 334 mm Capacity: 135.99 m³/h Head: H 36.80 m (to be confirmed) Type: centrifugal pump, vertical, submersible Mounting: vertical, flanged Discharge nozzle: side, flanged Djdpfj Aia E Tex Apmjcp Drive: external, via shaft and coupling Electric motor: not included Stock number: 1199 KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Brand: KSB ADVANTAGES AND CHARACTERISTICS ✔ Renowned KSB brand – German manufacturer of industrial pumps and valves. ✔ Vertical design – adapted for installation in tanks and technological installations. ✔ Centrifugal pump – a solution for transporting and circulating industrial liquids. ✔ Robust housing – durable construction with flanges, shaft, and coupling elements. ✔ External drive – possibility of cooperation with a suitably selected electric motor. ✔ Industrial applications – suitable for production, technological, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Type: Other APPLICATION OF THE KSB SUBMERSIBLE PUMP Industrial tanks and vats. Technological and production installations. Cooling and water circulation systems. Process liquid transport systems. Washing and degreasing installations. Industrial plants and maintenance. Pumping systems with vertical mounting. Selecting a pump for a specific liquid type and installation parameters requires checking the technical documentation. The item for sale is exactly the one shown in the photographs. The KSB Etanorm V pump is a proposition for industrial plants, pump service companies, maintenance departments, and companies looking for a vertical pump, a replacement unit, or a part for an industrial installation.

Condition: used, functionality: fully functional, For sale: a used submersible pump with a capacity of 160 m³/h, powered by a 7.5 kW motor and operating on 380 V. The pump has been inspected and is in full working order. Dcjdpj Aibriofx Apmop Condition/defect: a crack in the outer part of the housing casting. The pump has been fully tested and confirmed to be working; this defect does not affect its operation.

Condition: good (used), Tapflo PT20 high-pressure peristaltic hose pump Dcsdpfx Aoz It Eqepmop high-pressure peristaltic hose pump, mounted on stainless skid with 0.55Kw motor, previously used in the food industry, 3Ph

Condition: used, Hydraulic power unit 7.5 + 5 kW Djdpfxo Aicdbs Apmecp

Condition: used, Hydraulic power unit, 37 kW. Dedj Aicc Tjpfx Apmocp

Condition: good (used), Coolant pump, stainless steel coolant reservoir, coolant pump, expansion tank Dcedpfs Ah Eblox Apmep -Expansion tank: Stainless steel tank for coolant, divided into 3 sections -Connections/Division: see photos -Container: with fill level indicators -Tank dimensions: 750/300/H250 mm -Overall dimensions: 950/330/H365 mm -Weight: 31 kg

Condition: used, functionality: fully functional, KSB ETABLOC ETB 80-200 INDUSTRIAL PUMP – 22 kW – 80 m³/h – 58 m Original KSB ETABLOC ETB 80-200 industrial pump with a 22 kW electric motor. This is a high-performance centrifugal pump designed for industrial installations, circulation systems, cooling applications, and the transport of process water. Complete pump unit from the German manufacturer KSB, equipped with an energy-efficient, three-phase IE3 motor. Dedpfx Aj Aibf Eepmocp TECHNICAL SPECIFICATIONS OF THE KSB PUMP • Manufacturer: KSB – Germany • Series: ETABLOC / ETB • Type: ETB 80-200 • Type: centrifugal pump • Flow rate (Q): 80 m³/h (80,000 l/h) • Head (H): 58 m • Motor power: 22 kW / 22,000 W • Pump speed: 2954 rpm • Impeller diameter: 203 mm • Motor power supply: 400/690 V, 50 Hz • Motor efficiency class: IE3 • Protection class: IP55 • Insulation class: F • Motor year of manufacture: 2017 • Serial number: 1787

Condition: excellent (used), functionality: fully functional, For sale: Hidrostal D0DQ-S01 industrial submersible pump with a 4 kW three-phase motor, control box, float switch, and power cable. Robust construction with a ring-shaped base and a lateral discharge nozzle equipped with an elbow and quick-release coupling. Technical specifications: Motor power: 4 kW Power supply: 380–420 V, three-phase Frequency: 50 Hz Maximum flow rate: 48 l/s, or 172.8 m³/h Maximum head: 13.5 m Performance and head parameters are provided according to the attached specification for model D0DQ-S01. Maximum values do not occur simultaneously; actual flow rate depends on the discharge head and installation resistance. Included: pump with base, control box with buttons, float switch, power cable with power plug, discharge elbow with quick-release coupling. Dedps Aibq Tefx Apmocp Condition: used, with visible signs of wear, paint scratches, and localized corrosion. The scope of equipment and visual condition are shown in the photos.

Condition: used, functionality: fully functional, For sale: KSB KRTF 80-200/24 UH industrial submersible pump, designed for pumping wastewater and contaminated water. Robust, cast iron construction with a lifting handle. Data from the nameplate: Capacity: 45 m³/h – 45,000 liters per hour Head: 5 m Motor power P₂: 1.8 kW Dsdpfx Ape Aibc Hemscp Power supply: three-phase 400 V Frequency: 50 Hz Rated current: 4.3 A Rotational speed: 1450 rpm Ingress protection: IP68 Operating mode: S1 – continuous operation Insulation class: F Weight: 108 kg Equipment visible in the photos: Float switch Power cord with plug and electrical module Discharge elbow with barbed connector Lifting handle The pump is used, with visible signs of wear, paint chipping, and surface corrosion. The visual condition and scope of sale are shown in the photos.

Condition: used, functionality: unexamined, For sale: Flygt 2051.160 submersible pumps, designed for water pumping and drainage applications. Maximum capacity is 18 m³/h, which equals 18,000 liters per hour or 300 liters per minute. Actual capacity depends on the lift height and operating conditions. The stated price applies to one unit. The three pumps shown in the pictures are sold separately. Technical specifications: Manufacturer: Flygt Model: 2051.160 Maximum flow rate (Qmax): 18.0 m³/h – 18,000 l/h Power: 1 kW Rated voltage: 380/220 V Connection: star/delta Rated current: 2.4/4.1 A Three-phase motor Frequency: 50 Hz Rotational speed: 2850 rpm Operating mode: S1 – continuous operation Power factor cos φ: 0.89 Insulation class: F Weight: approximately 25 kg Manufactured in: Sweden Equipment: Carrying handle Lower suction basket Side discharge nozzle with hose connection Dcedpfj Aibrfox Apmep Power cord The pumps are used, with visible signs of wear, dirt, and paint coating damage. The visual condition and equipment are shown in the pictures. The item for sale is one pump. Price per unit.

Condition: excellent (used), functionality: fully functional, For sale: an industrial KSB ETABLOC-MN 32-200/752 centrifugal pump with a 7.5 kW electric motor. It features a monobloc design with an axial suction nozzle and a vertical discharge nozzle, both equipped with flanged connections. The rated capacity is 18 m³/h, or 18,000 liters per hour, at a head of 62 m, as indicated on the pump nameplate. Pump data: Dcjds Aibrbjpfx Apmsp Manufacturer: KSB Model: ETABLOC-MN 32-200/752 Rated capacity Q: 18 m³/h – 18,000 l/h Head H: 62 m Rotational speed according to the pump nameplate: 2940 rpm Year of manufacture: 1992 Nameplate number: 4-925-177653/1 Motor data: Power: 7.5 kW Rated voltage: 500 V, delta (Δ) connection Rated current: 11.8 A Frequency: 50 Hz Rotational speed: 2910 rpm Protection class: IP54 Insulation class: F Power factor cos φ: 0.84

Condition: new, Year of construction: 2022, functionality: fully functional, For sale: a new KSB Delta Primo SVP 3/0402 M pressure boosting system, equipped with three KSB Movitec V 4/2 B vertical pumps, each with an individual PumpDrive variable frequency drive. The system is designed for boosting and maintaining pressure in water systems. System data from the nameplate: Manufacturer: KSB Model: Delta Primo SVP 3/0402 M ID: 05082258 Date of manufacture: 17th week of 2022 Power supply: 3 × 400 V, 50 Hz Maximum current: 5.2 A Nominal system pressure: PN10 Protection rating: IP54 Control based on a pressure transducer Manufactured in: Netherlands Parameters of a single pump: Model: KSB Movitec V 4/2 B Flow rate at the point indicated on the nameplate: 4.01 m³/h Dcsdpe Aibfwofx Apmjp Head at this point: 14 m Power rating on the nameplate: 0.55 kW (0.26 kW), 50 Hz Rotational speed: 2900 rpm Connections: DN32, PN16 Temperature range specified for the pump: from -20 to +100°C KSB SuPremE motor, efficiency class IE5 Equipment: 3 KSB Movitec pumps 3 KSB PumpDrive variable frequency drives Control cabinet with operating panel and main switch Stainless steel manifolds Isolation valves Pressure gauge and pressure transducer Diaphragm tank Common mounting frame Operating and installation manual Condition: new. The system shown in the photos is for sale.

Condition: excellent (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 229404, overall weight: 50 kg, power: 2.8 kW (3.81 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 4 A, Purchased and installed. Found to be too strong so removed. It has been used a total of 10 minutes. 1250L/min 3 Phase Dcodpfx Aporqgausmjp Max head. 20m IP68

Condition: excellent (used), functionality: fully functional, For sale: PUMPEX PC 2001 H industrial submersible pump with a 5.8 kW three-phase motor and a flow rate of 70,000 liters per hour (70 m³/h). Robust construction with a lower suction basket, an upper discharge connection with a quick coupling, and a carrying handle. Technical specifications: Manufacturer: PUMPEX AB, Sweden Model: PC 2001 H Motor power: 5.8 kW Flow rate: 70,000 l/h – 70 m³/h Power supply: 400 V, three-phase Rated current: 12 A Rotational speed: 2830 rpm Maximum immersion depth: 20 m Insulation class: F Dcjdo Aibcijpfx Apmsp Included: pump, power cable, connection module with a power socket, and a discharge connection with a quick coupling. Condition: used, with visible signs of wear, scratches, paint chips, and localized corrosion. Visual condition and accessories are shown in the photos.

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Dsdpfx Aps Aibdcsmocp Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: as good as new (ex-display), Article description: Grundfos block pump NB50-160/167 A-F2-A-BQQV MG160MB2-42FF300-H3 ----- Dcedpfx Apoz Ing Nemop Condition of the article: Very good condition – unused, new stock. Internal number: LS5

Condition: new, Year of construction: 2019, functionality: unexamined, WILO EMU FA 10.62E SUBMERSIBLE SEWAGE PUMP – 5 kW 400 V ATEX WILO EMU FA 10.62E – PROFESSIONAL SEWAGE PUMP FOR PUMP STATIONS AND SEWERAGE SYSTEMS For sale is an original WILO EMU FA 10.62E submersible sewage pump with an FK17.1-4/12KEx motor, 5 kW power, and 400 V three-phase power supply. This is an industrial sewage pump designed for the transport of municipal and industrial wastewater, as well as contaminated liquids, in appropriately designed installations. Dcsdpj Aibg Rsfx Apmjp The pump from the German manufacturer WILO belongs to the professional EMU FA series, used in water and sewage installations, sewage pumping stations, and wastewater treatment plants. Key parameters: • Manufacturer: WILO – Made in Germany • Model: EMU FA 10.62E • Motor power: 5 kW / 5000 W • Supply voltage: 400 V, three-phase • Nominal flow rate: 115.6 m³/h – 115,600 l/h • Nominal head: 9.1 m • Year of manufacture: 2019 • Protection class: IP68 • Motor design: Ex / ATEX POWERFUL SUBMERSIBLE SEWAGE PUMP – KEY FEATURES HIGH EFFICIENCY – 115,600 L/H The pump’s nominal flow rate is 115.6 m³/h. The unit is designed for transporting large volumes of wastewater in professional pumping systems. 5 KW / 400 V INDUSTRIAL MOTOR Three-phase WILO FK17.1-4/12KEx motor with a rated power of 5 kW, designed for operation in industrial installations. IP68 SUBMERSIBLE PUMP Design intended for submerged operation. The maximum immersion depth according to the nameplate is 20 m. EX / ATEX EXPLOSION-PROOF DESIGN The pump is equipped with a motor with a factory Ex marking. Use in explosion-hazard areas requires the specific installation to comply with the manufacturer’s documentation and applicable requirements. ROBUST HYDRAULICS FOR WASTEWATER Centrifugal pump with hydraulics designed for transporting wastewater and liquids containing contaminants. According to the FA 10.62E series documentation, a single-channel impeller is used. TECHNICAL DATA – WILO EMU FA 10.62E Parameter Value Brand WILO Series EMU FA Model FA 10.62E Motor type FK17.1-4/12KEx Type Submersible sewage pump Rated power P2 5.00 kW Power supply 3 × 400 V Frequency 50 Hz Rated current 10.80 A Motor speed 1400 rpm Nominal flow rate 115.6 m³/h Nominal head 9.1 m Protection class IP68 Operating mode S1 Maximum medium temperature 40°C Maximum immersion depth 20 m Impeller diameter 220 mm Design Ex / ATEX Year of manufacture 2019 Country of manufacture Germany The stated flow rate and head values refer to the pump’s nominal operating point.

Condition: new, Year of construction: 2024, Brand: KSB Type: AU F-150-150-045 GG 109D Year of manufacture: 2024 169.00 m3/h Dcodps Ahi Hpsfx Apmep 19.00 m 1473 1/min Condition: new Includes manual

Condition: good (used), For sale: a used Hidrostal industrial submersible pump, complete with cables, float switch, control module, and a metal discharge pipe terminated with a Storz-type coupling. The pump has a transport handle and a wide base for stable positioning. Data read from the nameplate: Manufacturer: Hidrostal Type designation: Hidrostal C0CQ-L01 + CNBA2-GXEQ 3 kW with control – the remaining part of the designation is unreadable. Motor number: 116322 Output power P2: 3 kW Input power P1: 3.8 kW Supply: 380–420 V, three-phase Frequency: 50 Hz Rated current: 6.4 A Rotational speed: 2730 rpm Power factor cos φ: 0.86 Winding connection: delta (Δ) Insulation class: F Maximum ambient temperature: 40°C Marking on the nameplate: EEx d IIB T4 ATEX marking number: 99 ATEX 1079 Included equipment: Pump with motor. Power and control cables. Control module with indicators. CEE power plug. Float switch. Metal discharge pipe with Storz-type coupling. Base and transport handle. Dceds Aibc Aspfx Apmsp