Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Bedpjyh Na Eofx Adhslp

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. Bljdpfx Aozz Rfqsdhop The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Blsdpfx Adjzz Sidohop Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: WE173-000000006, total width: 1,350 mm, total length: 2,390 mm, total height: 1,980 mm, overall weight: 250 kg, pressure: 0.3 bar, Industrial HDPE 5000L process cooling tank, 3x 8" outlets either side Bljdpfx Asziazwodhop Choice of 4, price per unit.

Year of construction: 2016, condition: used, Used industrial ammonia refrigeration system from Johnson Controls / YORK, manufactured in 2016, complete with a machine container, three compressors, refrigerant separators, control system, and gas detection system. According to the technical documentation, the system includes screw and reciprocating compressors, as well as components for refrigeration and recooling. Manufacturer / System Builder: Johnson Controls Systems & Service GmbH Year of Manufacture: 2016 Refrigerant: Ammonia (NH3 / R717) Design: Containerized industrial refrigeration system Screw Compressor: 1 × SAB 193L Reciprocating Compressors: 2 × CMO 28 Compressor Control: Danfoss frequency converter FC 102 Refrigerant Separator: EM-Polar KBA 900/10-22, manufactured in 2016 Separator Volume: 1,440 liters Permissible Separator Pressure: -1 to +16 bar Separator Test Pressure: 22.9 bar Permissible Separator Temperature: -10 to +100 °C Other System Components: Oil Separator OS 324/5, Alfa Laval AlfaNova 76-126H plate heat exchanger, Grundfos pumps, refrigeration valves Recooling: Thermofin condensers and recoolers Gas Detection System: Dräger REGARD 3900 Gas Monitoring: NH3 sensors and ExTox measuring devices Operation: Siemens SIMATIC HMI touch panel Frequency Converters: 3 Danfoss VLT, as shown in the photos Bedpfx Adj Ahy Ubsholp Extensive documentation is available. Please do not hesitate to contact us if you have any questions.

Year of construction: 2019, condition: good (used), Zanotti Uniblock GCU5150B2B9E2L Horizontal condensing unit 2019, four fan unit, see plate for full spec, 3Ph Bedpfxezvli He Adhjlp

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph Blodpfezvllbox Adhjp

Condition: excellent (used), functionality: fully functional, Large ammonia cooling installation, Consisting of the following components: 1 large switchgear cabinet, left side. 2 frequency converters. Bledpfxe Ag Iu Hs Adhep 1 frequency converter in a steel cabinet. 1x NH3 separator with Pekasol cooler. 2x expansion tank. 1x tank with various valves and pumps. 2x MyCom unit, gold. 1x heavy-duty MyCom motor. Evapco condenser Indoor units: Cell 1 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 2 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 3 = 2x Helpman Thord 436-7/H-NC8-E1 Width: 1,550 mm. Height: 510 mm. Length: 3,420 mm. Cell 4 = 2x Helpman Thord 256-7-KB/E1-400V-SPEC Width: 680 mm. Height: 900 mm. Length: 4,500 mm. Cell 5 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 6 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 7 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 8 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 9 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 10 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 11 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 12 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 13 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 14 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Cell 15 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Cell 16 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 17 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 18 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 19 = 1x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Cell 20 = 4x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Loading bay = 4x Helpman Thord 236-7LN Width: 1,580 mm. Height: 410 mm. Length: 2,850 mm. In total, there are 54 cooling motors in the cooling cells. The complete installation will be dismantled and prepared for transport by the seller.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, A set of 3 used industrial dry coolers for chiller systems, sourced from an industrial site undergoing modernization/closure. These units are designed for cooling process fluids or dissipating heat for chiller systems. This is reliable, professional-grade equipment, ideal for the food processing industry, plastics manufacturing, commercial HVAC, or data centers. The units are in very good overall condition, clean, and have been regularly maintained. Quantity available: 3 units (available for purchase individually or as a complete set). Type: Dry cooler (for use with glycol-water mixtures). Ventilation: 10 high-efficiency axial fans (electric fans). PS working pressures 179/. Power supply: 3-phase, 400V – 50Hz. Materials: Heat exchanger coil with copper tubes and aluminum fins, robust galvanized steel casing with anti-corrosion protection. Maintenance: Coils have been cleaned; no significant damage to the fins. Ready for connection. Logistics: Equipment is available immediately and can be viewed on-site in Villeneuve la Garenne 92390 France. Collection: Lifting equipment is available on-site to assist with loading. Bodpfxe Ahrp Uo Adhslp Contact: For further information or to schedule a site visit, please contact me via: machine seeker.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1C968, Very well-maintained, almost new CO₂ refrigeration and freezing system from 2022. The system is being replaced because the company is moving to a larger building, making the complete installation redundant. Specifications: 2 freezing units for a freezing room of 1,000 m². (freezer capacity is 8,000 m³). 3 cooling units for a cooling room of 2,000 m². (cooling room capacity is 8,500 m³). 2 switchgear cabinets. 1 pressure unit/booster compressor unit, including expansion tanks. 1 condenser. Bledpfe Aa Rh Tsx Adhop This is a complete installation, including all documentation. It will be dismantled and loaded.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2200427994, cooling capacity: 390 kW (530.25 HP), type of cooling: air, ambient temperature (max.): 47 °C, ambient temperature (min.): -20 °C, 275 kW, MTA air-cooled chilled water unit, type: Aries G ASG 115 SHE M.T.A. S.p.A. The ARIES G ASG 115 SHE are compact chilled water units suitable for outdoor installation (from -20°C to +47°C); featuring a shell-and-tube evaporator, scroll compressors, control and switchgear cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C, P3 double pump, 500-liter buffer tank, electric anti-freeze heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 275 Chilled water temperature outlet/inlet (°C): 7 / 12 Ambient temperature (°C): 35 Refrigerant circuit: Refrigerant R454B Refrigerant circuits (number): 2 Compressors (number): 4 Blsdpfx Ae Agwcqodhop Capacity stages (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3 Protection class IP54

Condition: excellent (used), OctoFrost IQF freezer in lovely condition. Has only been used occasionally for freezing cubed meat product. Can be supplied with matching refrigeration plant at extra cost. Bledsycm Dmspfx Adhep RARE OPPORTUNITY!

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 65 kW (88.38 HP), type of input current: three-phase, type of cooling: water, overall weight: 750 kg, ambient temperature (max.): -5 °C, ambient temperature (min.): 43 °C, input voltage: 400 V, pressure: 10 bar, temperature: -8 °C, volume flow: 17.17 m³/h, pump pressure: 10 bar, total width: 1,110 mm, total length: 2,110 mm, total height: 1,750 mm, power: 6 kW (8.16 HP), York International 65kW Chiller. Purchased in 2023 - unused since date but in good physical and mechanical condition. Bedpfx Aezi S Dksdhslp Requires Glycol / Brine / Water reservoir.

Condition: used, Bitzer LHV7E/4CE-9F3Y-40S Condensing Unit Bitzer Ecostar condensing unit, with integrated frequency inverter, duel speed controlled EC fans, cooling capacity approx 32Kw, 3Ph Bedozvlnpopfx Adhjlp

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW Blodsx Ap Hpspfx Adhsp -45ºC/+40ºC: 86.0 kW

Condition: good (used), Year of construction: 2016, Galletti LCX082CSG Water chiller Serial: 16701165 2016, four fan system, adjustable temperature controls, see plate for all spec, 3Ph Bodowxll Njpfx Adhjlp

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: S527601, cooling capacity: 7 kW (9.52 HP), type of input current: three-phase, overall weight: 300 kg, ambient temperature (max.): 100 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 19 bar, volume flow: 4.8 m³/h, total width: 600 mm, total length: 600 mm, total height: 1,450 mm, input current: 16 A, operating pressure: 19 bar, empty load weight: 280 kg, input frequency: 50 Hz, Equipment: cooling unit, We are offering a used HUBER Unichiller 070Tw-H6 + Flow Control Cube MID chiller, manufactured in 2023. Manufacturer: HUBER Model: Unichiller 070Tw-H6 + Flow Control Cube Year of Manufacture: 2023 Machine Type: Chiller Bedpfx Ado Agu E Rshslp If you have any questions or require further information, please feel free to send us a message or call us. Product Description This offer includes two perfectly matched devices for industrial process cooling and precise flow control: Huber Unichiller 070Tw-H6 – a powerful recirculating chiller for temperature ranges from -10 °C to +40 °C Flow Control Cube MID – magnetically inductive flow control for electrically conductive thermal fluids Technical Data Huber Unichiller 070Tw-H6 Temperature Range: -10 … +40 °C Cooling Capacity: 7 kW (15 °C), 4.2 kW (0 °C), 2.5 kW (-10 °C) Refrigerant: R-449A (A1, H280) Controller: Pilot ONE Dimensions: 600 × 600 × 1450 mm Flow Control Cube MID Temperature Range: -40 … +130 °C Max. Flow Rate: 80 l/min Accuracy: ±0.1 l/min Dimensions: 420 × 593 × 591 mm

Condition: used, each with 32 stations with divider plate Bjdpfj Af Iy Usx Adhslp suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)

Condition: used, each with 24 stations with divider plate suitable for 48 blocks : Bedpfxo Agmpbs Adhjlp - dimensions 1 full block per station -> ± 1.056 mm x 530 mm - dimensions 2 blocks per station -> ± 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 3.319 x 1.600 x 1.120 mm 24 blocks weighing ± 26 kg or 48 blocks weighing ± 13 kg ± 1.248 kg / Cycle (2h30)

Condition: used, Vötsch Temperature Shock Chamber / Thermal Shock Chamber Vötsch ShockEvent T/120/V2 Temperature Shock Chamber Hot chamber up to +220 °C / Cold chamber up to -80 °C Workshop-tested – water-cooled design with 120 liter test chamber volume For sale is a used temperature shock chamber from Vötsch Industrietechnik GmbH. The temperature shock chamber is suitable for thermal cycling, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system features a hot chamber and a cold chamber. The test specimen is transported between the two temperature zones using a movable carriage. This allows for rapid temperature changes to test thermal stress resistance. Technical data: Blodpfx Adj Ahm Aajhjp Manufacturer: Vötsch Industrietechnik GmbH Type: ShockEvent T/120/V2 Device type: Temperature shock chamber / Thermal shock chamber Year of construction: 2018 Hot chamber: up to +220 °C Cold chamber: up to -80 °C Two-chamber temperature shock system Humidity control: not available Water-cooled design Temperature data according to manufacturer's brochure: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +100 °C Temperature change by transporting the test specimen between the hot chamber and the cold chamber Temperature change rates according to manufacturer's brochure: Heating rate hot chamber: approx. 18 K/min Cooling rate cold chamber: approx. 7.5 K/min Refrigerant 1: R449A Refrigerant quantity: 1.70 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.30 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 14 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Test chamber volume: 120 liters Internal dimensions (H × W × D): 410 × 470 × 650 mm External dimensions (H × W × D): 2,450 × 1,000 × 2,530 mm Weight: approx. 1,000 kg Dimensions and weight according to manufacturer's brochure for the base unit of the T/120/V2 model series. Deviations due to equipment features are possible. Equipment: Two separate temperature chambers Hot chamber and cold chamber Movable test specimen carriage Digital control and operating unit Temperature control Water-cooled design Cooling water connections for supply and return Temperature shock operation Temperature change between hot and cold chamber Electrical connection: 400 V / 50 Hz Refrigeration system with R449A and R23 Temperature monitoring Test specimen mounting in the movable carriage Application areas: Temperature shock testing Thermal cycling Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to pictures Scope of delivery: 1x Vötsch ShockEvent T/120/V2 temperature shock chamber Accessories according to pictures Important note: For the safety of our customers, the following work is carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a complete industrial RITTAL TopTherm switchgear cooling system, consisting of a central RITTAL chiller/cooling unit and a total of 16 RITTAL air/water heat exchangers. The system comes from an industrial production facility and was used for the central cooling of several switchgear cabinets. The entire system was in trouble-free operation until it was professionally dismantled. RITTAL Chiller / Cooling Unit Manufacturer: RITTAL GmbH & Co. KG Type: SK 3336.459 Design: KRAE0200TT00V480EF Year of manufacture: 2020 Date of manufacture: 07/15/2020 Serial number: 2020K000069533 Technical data: Nominal cooling capacity: 24,400 W / 24.4 kW Operating voltage: 3 × 400 V / 50 Hz Max. current: 22.3 A Starting current: 111.7 A Max. power consumption: 11,330 W Refrigerant: R410A Tank volume: 78 liters Temperature range: -20 to +43 °C Noise level: 76 dB(A) Protection class: IP44 Weight: 326 kg 16 RITTAL Air/Water Heat Exchangers The scope of delivery includes a total of: 10 × RITTAL TopTherm SK 3210.500 Air/Water Heat Exchanger Useful cooling capacity: 4.0 kW Operating voltage: 230 V Cooling medium: Water Protection class: IP55 6 × RITTAL TopTherm SK 3209.500 Air/Water Heat Exchanger Useful cooling capacity: 2.5 kW Operating voltage: 230 V Water flow rate: 400 l/h Cooling medium: Water Protection class: IP55 Weight: approx. 23.5 kg The heat exchangers were mounted on the respective switchgear cabinets and supplied with cooling water via the central RITTAL cooling unit. Scope of delivery: 1 × RITTAL TopTherm Chiller SK 3336.459, 24.4 kW 10 × RITTAL Air/Water Heat Exchanger SK 3210.500 6 × RITTAL Air/Water Heat Exchanger SK 3209.500 Existing cooling water pipes and hoses Existing connection fittings and connecting parts Other existing installation and connection accessories as shown in the pictures This offers a largely complete central switchgear cooling system with a total of 16 cooling points. The components come from a professionally installed industrial system, manufactured in 2020. The condition is used; minor optical signs of wear or damage to individual plastic covers can be seen in the pictures. Inspection is possible by appointment. The complete system is preferred for sale. Bledpfx Aozwaa Aodhsp Price: €14,900 net, negotiable Subject to prior sale and errors in the technical data. Technical data according to nameplates and available manufacturer documents.

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: 32003375, type of input current: three-phase, type of cooling: air, overall weight: 2,320 kg, input voltage: 400 V, total width: 2,220 mm, total length: 4,110 mm, total height: 2,150 mm, input frequency: 50 Hz, Climaveneta NECS/Q/B 0904 multi-purpose unit, air-to-water, air-cooled condenser, for simultaneous chilled and hot water production in a 4-pipe system. Year of manufacture: 2010. Serial number: 32003375. Cooling capacity: approximately 211 kW. Heating capacity: 234.2 kW. Power consumption in cooling mode: 85.23 kW; maximum electrical power as indicated in the documentation: 107.8 kW. Four scroll compressors, two refrigeration circuits, R410A refrigerant (charge indicated on the nameplate: 2 × 35 kg). Power supply: 400 V, three-phase, 50 Hz. Approximate dimensions (L × W × H): 4,110 × 2,220 × 2,150 mm. Weight as indicated on the nameplate: 2,320 kg. Exact operating hours not recorded. Bodjz Hqrlepfx Adhelp Condition: used equipment, already disassembled and stored in Covelas, Trofa. It was operational before disassembly, but without reaching full capacity and requiring maintenance. In circuit 1, an internal leak was identified in the expansion valve and an abnormal noise in the four-way valve. In circuit 2, the suction transducer is defective. Under current conditions, it is not possible to perform a load test. Some photographs show the equipment before disassembly; others show its current state in the warehouse. Visits by appointment only. Collection, lifting equipment, loading, and transportation are the responsibility of the buyer.

Condition: good (used), Year of construction: 2020, Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph Bljdpfx Aou U Iyqsdhep

Condition: used, Year of construction: 2007, functionality: fully functional, cooling capacity: 1,012 kW (1,375.94 HP), Carrier Absotption Chiller working with Lithium Bromide Bedpfx Ads Afc Ngohjlp Cooling capacity at 12/8C° = 1000KW (300 refr.tons) In good working condition

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Bledpjzyc Diofx Adhjp Details available upon request.