Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers. Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134 a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Dwjdpozz Rfqefx Aizod

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Dwedpfsyh Na Ejx Aizod

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: WE173-000000006, total width: 1,350 mm, total length: 2,390 mm, total height: 1,980 mm, overall weight: 250 kg, pressure: 0.3 bar, Industrial HDPE 5000L process cooling tank, 3x 8" outlets either side Dwodpfxsziazwe Aizsd Choice of 4, price per unit.

Year of construction: 2019, condition: good (used), Zanotti Uniblock GCU5150B2B9E2L Horizontal condensing unit Djdpfx Aezvli Hsizowd 2019, four fan unit, see plate for full spec, 3Ph

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator Dwsdpfx Aszvllbjizjd 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1C968, Very well-maintained, almost new CO₂ refrigeration and freezing system from 2022. Dwjdpfx Ao Aa Rh Teizjd The system is being replaced because the company is moving to a larger building, making the complete installation redundant. Specifications: 2 freezing units for a freezing room of 1,000 m². (freezer capacity is 8,000 m³). 3 cooling units for a cooling room of 2,000 m². (cooling room capacity is 8,500 m³). 2 switchgear cabinets. 1 pressure unit/booster compressor unit, including expansion tanks. 1 condenser. This is a complete installation, including all documentation. It will be dismantled and loaded.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, volume flow: 1,064 m³/h, Model RC8411, two stage with 110KW motor/740rpm Dodpfx Aie Aid Ewszowd with oil separator Cap.= 261 KW at -30C°/+40C° Swept Volume= 1064m3/h

Condition: used, functionality: fully functional, Commercial refrigeration and freezer combination (walk-in refrigerator/freezer), divided into two areas by a wall in the center. Suitable for the separate storage of refrigerated and frozen goods in larger quantities. Technical data: - Overall interior dimensions approx. 290 x 180 x 230 cm (W x D x H) - Design: combined refrigerator and freezer, divided in the center Dwodpj Ait I Isfx Aized - Light-colored, insulated interior panels - Interior lighting - Doors with long handles Scope of delivery: - Refrigerator/freezer unit - Several perforated shelves around the perimeter (gray) Condition: used, functional, with some signs of wear and tear and abrasion on the exterior surfaces. Location: 6430 Ötztal-Bahnhof (Tyrol). Viewing by appointment; dismantling and removal by the buyer. Sold on behalf of a customer.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, volume flow: 1,062 m³/h, Model RC8412E, two stage with 110KW motor/740rpm with oil separator Cap.= 251 KW at -35C°/+35C° Swept Volume= 1062m3/h Dwedpfxj Aid E To Aized

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, volume flow: 798 m³/h, Model RC6311, two stage with 132KW motor/1450rpm Dedpfx Ae Aid Drsizjwd with oil separator Cap.= 224 KW at -30C°/+40C° Swept Volume= 798m3/h

Condition: good (used), Year of construction: 2020, Daikin ERQ200A7W1B Condensing unit Dodpou U Iyqefx Aizowd Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph

Condition: used, WEISS TECHNIK Temperature Test Chamber Weiss WT 450/70 Temperature range -70 °C to +180 °C according to the current data sheet 450 liter test chamber volume / Air-cooled For sale is a used temperature test chamber from the manufacturer Weiss Technik. Suitable for temperature tests, environmental simulation, material and component testing, as well as quality assurance. Technical data: Manufacturer: Weiss Technik Type: WT 450/70 Device type: Temperature test chamber Test chamber volume: 450 liters Cooling: air-cooled Temperature data according to the current manufacturer's data sheet: Temperature range: -70 °C to +180 °C Heating rate: 4.0 K/min Cooling rate: 2.5 K/min Maximum heat compensation: 3,000 W Speeds according to IEC 60068-3-5 Internal dimensions (W × D × H): 800 × 700 × 800 mm Transport dimensions (W × D × H): 1,190 × 1,310 × 1,950 mm Power connection according to manufacturer's data sheet: 1P+N+PE / 230 V AC / 16 A Ethernet interface Further details from a previous sales advertisement: Rated power: 1.5 kW Rated current: 9.2 A Refrigerant: R404A and R23 Weight: approx. 310 kg Details to be verified against the nameplate. Equipment: Test chamber with 450 liter volume Cable entry on the right, Ø 50 mm Air-cooled version Ethernet interface Accessories as shown in the pictures Application areas: Temperature tests Material and component testing Electronics and component testing Research and development Quality assurance Scope of delivery: 1 × Weiss WT 450/70 temperature test chamber Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Important note: Dsdo Aipk Sepfx Aizjwd For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Other items not explicitly mentioned are not included in the sale. Shipping or freight transport possible. Subject to change, errors and prior sale. We are happy to answer any further questions by phone.

Condition: excellent (used), functionality: fully functional, Large ammonia cooling installation, Consisting of the following components: 1 large switchgear cabinet, left side. 2 frequency converters. 1 frequency converter in a steel cabinet. 1x NH3 separator with Pekasol cooler. 2x expansion tank. 1x tank with various valves and pumps. 2x MyCom unit, gold. 1x heavy-duty MyCom motor. Evapco condenser Indoor units: Cell 1 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 2 = 3x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 3 = 2x Helpman Thord 436-7/H-NC8-E1 Width: 1,550 mm. Height: 510 mm. Length: 3,420 mm. Cell 4 = 2x Helpman Thord 256-7-KB/E1-400V-SPEC Width: 680 mm. Height: 900 mm. Length: 4,500 mm. Cell 5 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 6 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 7 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 8 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 9 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 10 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 11 = 3x Helpman Thord 446-7/E1-G Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 12 = 3x Helpman Thord 444-7/E1 Width: 1,550 mm. Height: 510 mm. Length: 4,440 mm. Cell 13 = 2x Helpman Thord 455-7/H-NC12-E1 Width: 1,670 mm. Height: 510 mm. Length: 5,500 mm. Cell 14 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Cell 15 = 1x Helpman Thord 456-7-E1-AFV. H-400V Width: 1,600 mm. Height: 510 mm. Length: 5,450 mm. Dwsdpfx Aie Ag Iu Hjzod Cell 16 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 17 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 18 = 3x Helpman Thord 446-7-E1-AFV.H-400V Width: 1,600 mm. Height: 510 mm. Length: 4,440 mm. Cell 19 = 1x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Cell 20 = 4x Helpman Thor D 224-4-H Width: 1,230 mm. Height: 430 mm. Length: 2,030 mm. Loading bay = 4x Helpman Thord 236-7LN Width: 1,580 mm. Height: 410 mm. Length: 2,850 mm. In total, there are 54 cooling motors in the cooling cells. The complete installation will be dismantled and prepared for transport by the seller.

Condition: good (used), Year of construction: 2016, Galletti LCX082CSG Water chiller Serial: 16701165 Dwodswxll Nspfx Aizjd 2016, four fan system, adjustable temperature controls, see plate for all spec, 3Ph

Condition: used, CTS – Clima Temperatur Systeme GmbH Temperature test chamber / Battery test chamber T-50/3800/I -50 to +100 °C | 3,750 liters | water-cooled Nitrogen inertization with O2/CO monitoring and safety door locking Used CTS T-50/3800/I for temperature and environmental simulation tests. According to the previous owner, it was used for testing HV battery systems. TECHNICAL DATA Temperature range: -50 to +100 °C Temporal/spatial temperature deviation: up to ±0.5 K each Heating rate: approx. 4 K/min (-40 to +80 °C) Cooling rate: approx. 3 K/min (+85 to -40 °C) Change rates according to manufacturer's documentation, average without test specimen in the inlet air. Test volume: 3,750 liters Internal dimensions (H × W × D): approx. 1,000 × 2,500 × 1,540 mm (according to the previous owner) Dsdpfxo Aidd Ns Aizswd Installation drawing: dimensions in top view 2,840 mm; overall height approx. 2,450 mm. Complete external dimensions to be confirmed. Weight: chamber approx. 2,700 kg; separate control cabinet approx. 200 kg; together approx. 2,900 kg without test specimen/additional fittings. REFRIGERATION SYSTEM AND ELECTRICALS Refrigerant pre-cooling: R507, 6.5 kg Refrigerant cooling: R23, nameplate 15 bar / 5 kg Max. permissible overpressure: 25 bar each; test pressure: 27.5 bar each Mains connection: 400 V / 3/N / 50 Hz Rated power according to nameplate: 20.4 kW; rated current: 36.3 A On-site protection: 50 A slow-blow; protection class: IP54 Max. heat input: 5,000 W at -40 °C Cooling water supply/return: R 1 inch; approx. 2.5 m³/h at ΔT = 10 K and full load Nitrogen: R 3/4 inch, operating pressure 3–6 bar Condensate drain: R 1 inch internal thread Sound pressure level: under 70 dB(A) according to manufacturer's documentation EQUIPMENT Digital temperature control with 32-bit controller, LCD setpoint/actual value display, numerical setpoint input, manual and program operation, water-cooled refrigeration unit, electronic monitoring/control system, stainless steel heating element with safety temperature limiter, stainless steel test chamber (1.4301), floor load 500 kg, radial fan, lockable double-wing door, separate control cabinet, RS232 and potential-free fault reporting contact. SAFETY / BATTERY TESTING Nitrogen inertization, O2 residual content monitoring, CO sensor, Dräger-Polytron sensors for O2/CO according to the previous owner, ATEX-tested flame arrestors according to manufacturer's documentation, electromagnetic door locking, mechanical emergency release, overpressure switch in the refrigeration circuit and current monitoring of the fan motors. HV connections and cooling water connections for test specimens are available according to the previous owner. The previous owner describes the safety equipment as "Hazard Level 6"; this classification has not been independently confirmed. AREAS OF APPLICATION HV battery and temperature tests, environmental simulation, electronics, component and material testing, development, quality assurance, as well as aging and stress tests. CONDITION / SCOPE OF SUPPLY Used; optical condition according to the pictures. 1 × CTS T-50/3800/I, separate control cabinet and accessories as shown in the pictures. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Year of construction: 2021, Univap TCM/E 5ED Evaporator with electric defrost unit Dedpfx Aeuliazjizowd 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant

Condition: used, Bitzer LHV7E/4CE-9F3Y-40S Condensing Unit Dwjdszvlnpjpfx Aized Bitzer Ecostar condensing unit, with integrated frequency inverter, duel speed controlled EC fans, cooling capacity approx 32Kw, 3Ph

Year of construction: 2016, condition: used, Used industrial ammonia refrigeration system from Johnson Controls / YORK, manufactured in 2016, complete with a machine container, three compressors, refrigerant separators, control system, and gas detection system. According to the technical documentation, the system includes screw and reciprocating compressors, as well as components for refrigeration and recooling. Manufacturer / System Builder: Johnson Controls Systems & Service GmbH Dwedpfxe Ahy Ube Aizsd Year of Manufacture: 2016 Refrigerant: Ammonia (NH3 / R717) Design: Containerized industrial refrigeration system Screw Compressor: 1 × SAB 193L Reciprocating Compressors: 2 × CMO 28 Compressor Control: Danfoss frequency converter FC 102 Refrigerant Separator: EM-Polar KBA 900/10-22, manufactured in 2016 Separator Volume: 1,440 liters Permissible Separator Pressure: -1 to +16 bar Separator Test Pressure: 22.9 bar Permissible Separator Temperature: -10 to +100 °C Other System Components: Oil Separator OS 324/5, Alfa Laval AlfaNova 76-126H plate heat exchanger, Grundfos pumps, refrigeration valves Recooling: Thermofin condensers and recoolers Gas Detection System: Dräger REGARD 3900 Gas Monitoring: NH3 sensors and ExTox measuring devices Operation: Siemens SIMATIC HMI touch panel Frequency Converters: 3 Danfoss VLT, as shown in the photos Extensive documentation is available. Please do not hesitate to contact us if you have any questions.

Condition: like new (used), Year of construction: 2021, Power: 1.1 kW, 220 V, 50/60 Hz, Dsdpfxo Aifrue Aizewd Weight: 48 kg Refrigerant: R410A, 980 g. The air coolers were installed on newly acquired erosion machines. Due to the existing central water cooling system, the air coolers were removed before commissioning.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, A set of 3 used industrial dry coolers for chiller systems, sourced from an industrial site undergoing modernization/closure. These units are designed for cooling process fluids or dissipating heat for chiller systems. This is reliable, professional-grade equipment, ideal for the food processing industry, plastics manufacturing, commercial HVAC, or data centers. The units are in very good overall condition, clean, and have been regularly maintained. Quantity available: 3 units (available for purchase individually or as a complete set). Type: Dry cooler (for use with glycol-water mixtures). Ventilation: 10 high-efficiency axial fans (electric fans). PS working pressures 179/. Dweds Ahrp Uspfx Aizjd Power supply: 3-phase, 400V – 50Hz. Materials: Heat exchanger coil with copper tubes and aluminum fins, robust galvanized steel casing with anti-corrosion protection. Maintenance: Coils have been cleaned; no significant damage to the fins. Ready for connection. Logistics: Equipment is available immediately and can be viewed on-site in Villeneuve la Garenne 92390 France. Collection: Lifting equipment is available on-site to assist with loading. Contact: For further information or to schedule a site visit, please contact me via: machine seeker.

Year of construction: 2019, condition: like new (used), machine/vehicle number: AT4-F 32x16/32x16 - wetterfest, Equipment: cooling unit, - what is the air volume for recirculated air – 8 687 m3 - air volume for fresh air – 2,3 m3/s - cooling capacity – 61 kW - heating capacity – 22 kW - is there humidification / dehumidification available NO - what are dimensions of the unit - 5x1,5x2,8 m / 4000 kg Dedpfoxvdi Sox Aizowd

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 65 kW (88.38 HP), type of input current: three-phase, type of cooling: water, overall weight: 750 kg, ambient temperature (max.): -5 °C, ambient temperature (min.): 43 °C, input voltage: 400 V, pressure: 10 bar, temperature: -8 °C, volume flow: 17.17 m³/h, pump pressure: 10 bar, total width: 1,110 mm, total length: 2,110 mm, total height: 1,750 mm, power: 6 kW (8.16 HP), York International 65kW Chiller. Purchased in 2023 - unused since date but in good physical and mechanical condition. Djdpfozi S Dkox Aizswd Requires Glycol / Brine / Water reservoir.

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: S527601, cooling capacity: 7 kW (9.52 HP), type of input current: three-phase, overall weight: 300 kg, ambient temperature (max.): 100 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 19 bar, volume flow: 4.8 m³/h, total width: 600 mm, total length: 600 mm, total height: 1,450 mm, input current: 16 A, operating pressure: 19 bar, empty load weight: 280 kg, input frequency: 50 Hz, Equipment: cooling unit, We are offering a used HUBER Unichiller 070Tw-H6 + Flow Control Cube MID chiller, manufactured in 2023. Manufacturer: HUBER Model: Unichiller 070Tw-H6 + Flow Control Cube Year of Manufacture: 2023 Machine Type: Chiller If you have any questions or require further information, please feel free to send us a message or call us. Product Description Dwjdpfe Agu E Rjx Aized This offer includes two perfectly matched devices for industrial process cooling and precise flow control: Huber Unichiller 070Tw-H6 – a powerful recirculating chiller for temperature ranges from -10 °C to +40 °C Flow Control Cube MID – magnetically inductive flow control for electrically conductive thermal fluids Technical Data Huber Unichiller 070Tw-H6 Temperature Range: -10 … +40 °C Cooling Capacity: 7 kW (15 °C), 4.2 kW (0 °C), 2.5 kW (-10 °C) Refrigerant: R-449A (A1, H280) Controller: Pilot ONE Dimensions: 600 × 600 × 1450 mm Flow Control Cube MID Temperature Range: -40 … +130 °C Max. Flow Rate: 80 l/min Accuracy: ±0.1 l/min Dimensions: 420 × 593 × 591 mm

Condition: excellent (used), Year of construction: 2011, cooling capacity: 437 kW (594.15 HP), overall weight: 4,666 kg, Carrier 30XA0452 liquid chiller (437 kW) for sale – in excellent condition Manufacturer: Carrier Dwsdps Aig Hnefx Aizod Model: 30XA0452 Date of manufacture: 11 February 2011 Refrigerant: R134a Total refrigerant charge: 90.5 kg Circuit A: 53.50 kg Circuit B: 37.00 kg Capacity: 437 kW Temperature range (min/max): -20°C / 72°C Length: 4798 mm Width: 2253 mm Height: 2297 mm Weight: 4666 kg

Condition: excellent (used), Year of construction: 2011, cooling capacity: 268 kW (364.38 HP), overall weight: 3,674 kg, Carrier 30XA0252 liquid chiller (268 kW) for sale – in excellent condition Manufacturer: Carrier Model: 30XA0252 Date of manufacture: 11 February 2011 Refrigerant: R134a Total refrigerant charge: 75.5 kg Circuit A: 37.00 kg Dodpfx Aij Aig H Iezowd Circuit B: 38.50 kg Capacity: 268 kW Temperature range (min/max): -20°C / 72°C Weight: 3674 kg