Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Lhsdeyu Srmspfx Adtef Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Ledjy D Nktopfx Adtshf Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Lhsdpfx Adsy D Nicjtjf Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: used, Year of construction: 2008, 2008 | FSI TP 175 MOBILE | Used Shredder 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 19 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine ran well at the time of inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39966 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Lhjdsy D T Ivspfx Adtjf ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Lsdpjft U Sajfx Adtjhf Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Lhjdpfx Adod Sblmetof Working width: 1000mm

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Lhodpfx Aoyrfgredtef Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper

Condition: used, Year of construction: 2018, operating hours: 9,438 h, functionality: unexamined, 2018 Terex TDS820 Slow speed shredder Ljdpjyuv D Hefx Adtshf 27,500kg, 2,000mm Usage: 9,438 hours

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2454320049, overall weight: 130 kg, total width: 660 mm, total length: 660 mm, total height: 980 mm, power: 1.5 kW (2.04 HP), input voltage: 230 V, cutting width (max.): 420 mm, Cardboard shredder for recycling cardboard and producing void fill material (cardboard mesh). Includes AL-KO extraction unit. Easy adjustment of the cardboard mesh width via a movable stop. Regardless of the width of the cardboard to be shredded, cardboard mesh of uniform width is always produced. Lhjdpjy Dqvdjfx Adtjf

Condition: used, machine/vehicle number: 13210, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor knives: 76 Ledsy Di R Tjpfx Adtohf Stator knives: 4 (1 row) Feed opening approx. 1500 x 1500 mm Drive motor: 2 x 75 kW The photos shown here do not reflect the current condition of the machine!

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) Lsdpfx Adjl I Dx Nstjhf diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Lhodeyk Ea Aopfx Adtjf

Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm Lsdpfey At E Ssx Adtjhf

Condition: used, Double-shaft shredder Lodjy At E Eepfx Adtshf Drive 37.50 KW

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Ljdpfx Aoyr Tx Ajdtehf Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: used, machine/vehicle number: 13289, Rotor diameter: 450 mm Rotor width: 1500 mm Rotor knives: 136 Stator knives: 2 x 5 pcs Infeed opening approx. 1500 x 1500 mm Drive motor: 60 kW Ledpfsyr Tw Ejx Adtehf The machine currently does not match the picture, as it is being overhauled.

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Lhjdpfxjyr Twrs Adtef Rotor width: 1500 mm Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Lhjdeyr Tu Ropfx Adtjf Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Inlet cross-section approx. 1100 x 1500 mm Ledpfx Aeyr Tudjdtohf Drive motor: 37 kW

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Lhsdpsyr Tttsfx Adtsf Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg Ledeyr Tpuepfx Adtjhf

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Lodpfxsyr Tlpj Adtshf Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste Lhsdjyr Tg Tjpfx Adtjf

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. Lodpfjyr Tg Hox Adtohf The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding.

Condition: new, General: The single-shaft shredders of the ZTS/ZTTS series have been specifically developed for the shredding of whole or pre-shredded tires. Both ZTS and ZTTS shredders feature a large rotor diameter of 760 mm and working widths ranging from 1,500 to 3,000 mm. Both types come equipped with oversized, external bearings and dual drives. The tangential infeed ensures optimal feeding of input material without the need for an additional hydraulic pusher. All tire shredders are fitted with special wear protection in all relevant machine areas. The main differences between ZTS and ZTTS models are the number of stator knife rows and the type of screen perforation used. Lhedpfx Aeyr Tf Nedtef Applications: Machines of the ZTS series feature a single stator knife row and are therefore utilized for the first stage of pre-shredding car tires or other large, solid pieces to a final particle size of approximately 150 mm. For the second stage, a ZTTS shredder is used to further reduce the material to about 20 mm. The intelligent machine design, combined with the adjustable knife clearance, enables optimal separation of rubber and steel fractions. In an additional step, the steel content can be separated using a powerful magnetic separator.