Used shrinking equipment for sale (274)

Condition: ready for operation (used), functionality: fully functional, From a workshop for people with disabilities: Functionality tested. Shrink tunnel + angle welding machine from AVC. Bjdpfozdq Nuox Adholp Model HS 500 + KT 500 gas. Shrink tunnel, 380 volts. Angle welding machine, 220 volts. Individual purchase also possible.

Condition: ready for operation (used), Year of construction: 2017, Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available. Bsdpfx Adsw Rqv Asholp

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Blsdpfx Aovvlyisdhop Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: ready for operation (used), Year of construction: 2019, A tray packaging machine Multivac including an auxiliary packaging machine MCS 260 is available. Tray dimensions X/Y 1: 187mm/137mm, film width 1: 335mm, tray dimensions X/Y 2: 340mm/128mm, film width 2: 315mm, max. cycle rate: 15cycles/min, throughput: approx. 45trays/min, max. tray depth: 130mm. Machine dimensions X/Y/Z: approx. 4500mm/1050mm/2100mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible. Bodpfxsx Db Uno Adhelp

Condition: like new (used), Ling Systems Stainless heat shrink tunnel stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control Bledpfxsd I Ncbj Adhop

Condition: used, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Bodpfoz Hwtcjx Adhjlp Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, AUTOMATIC L-SEALING MACHINE WITH INTEGRATED TUNNEL MODEL F-AUTO 3550 COMBO from 2011 Max. product length: 500 mm Max. product width: 350 mm Max. product height: 150 mm Film type: Polyolefin - PE Infeed and outfeed height: 900 mm + 50 mm adjustable Output (A4 format): Depending on the product – up to 35 packs/min Film roll diameter: Int. 76 mm / ext. 350 mm Max. roll width: 550 mm Voltage and power consumption: 230V/400V, 3-phase, 8 kW Pneumatic supply: 6 bar Blsdpfxew Nx Nbe Adhep Weight: 700 kg Dimensions (LxWxH): 2700 x 1200 x 1550 mm

Condition: used, Hugo Beck SL 412/25 Shrink Tunnel Blodpfx Aep H T Iusdhjp Hugo Beck Shrink Tunnel SL 412/25 380 V 6/9 kW power Air circulation fan Cooling fan 2 x adjustable heater 1 x base heater 1 x additional heater with chain conveyor Dimensions Tunnel length: 120 cm Machine: L x W x H = 166 x 64 x 26 cm More new and used items can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2023, functionality: fully functional, Shrink hood system FRESKA Perfectly suited for gastronomy - supermarket - catering The machine is equipped as standard with 2 roll holders, a soft shrink system for perfect film shrinkage on all products and a fan stop device for ease of use. Technical data: Output - up to 300 pieces per hour Blsdpfxjuakl To Adhep Depending on product dimensions, film type, film thickness and operating personnel Power supply - 230V Sealing bar usable dimensions - 380 x 250 mm Max. Product dimensions - 350 x 240 x 140 mm Max. Film width - 380 mm Max. Film roll diameter - 170mm Machine dimensions - 840 x 640 x 690 mm with open lid 840 x 640 x 550 mm with closed lid Weight - approx. 55 kg

Condition: ready for operation (used), Year of construction: 2011, A semi-automatic vacuum chamber packaging machine Multivac is available. Chamber dimensions X/Y/Z: 900mm/440mm/160mm, sealing bars: 2x440mm, sealing type: double-seam cut-off sealing, chamber height: 160mm, max. vacuum pump capacity: 150m³/h, machine dimensions X/Y/Z: approx. 1100mm/600mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Bsdpfx Aexltvajdholp

Condition: new, Year of construction: 2023, functionality: fully functional, Shrink tunnel 70 digit Technical features Bjdpsuaki Sefx Adhjlp Power supply: 200/220/380V Pase: 3 ph MAX product dimensions: 650x350x lg.1200mm Machine dimensions: 2770x1160x h.1640mm Weight trolley (net/gross): 415/483kg Tunnel inlet dimensions: 680x390mm

Condition: as good as new (ex-display), Year of construction: 2018, Shrink tunnel Bodpfezlrprjx Adhelp Manufacturer: Diez Type: HTC 8540 D Year of manufacture: 2018 Belt width: 85 cm Length: 250 cm Clearance height: 40 cm New No operating hours 28926

Condition: used, Die Kallfass KC5050/400 Universal ist eine sehr kompakte Winkeleinschweißmaschine mit einem Schrumpftunnel.  The Kallfass KC5050/400 Universal is a very compact L-sealer with an integrated shrink tunnel. Halb-automatische Winkeleinschweißmaschine / Semi-Automatic Foil sealing machine Kallfass KC5040/450 Universal Bsdj Ahkzfspfx Adhslp Year 2000 - Serial-No. FR 06.00.094 Schweißrahmenabmessungen / max. 500 x 400mm Folienrollenbreite / Foil width max. 550mm Tunneldurchlassbreite / Tunnel width max. 520mm Tunneldurchlasshöhe / Tunnel high max. 245mm Fahrbar auf Rollen / Mobile on mobile frame Nach dem Schweißen automatisch der Transport in den Schrumpftunnel  /After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1991, condition: excellent (used), Manufacturer: Beck Max. throughput: 650x300mm Max. temperature: 350 °C Blsdpfx Asmv E Icedhop Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Brand: Kallfass Model: KW 5050 Universal Year: 2003 welding frame dimensions: 500 x 500 mm maximum film roll width: 650 mm Working height: 840 - 950 mm Passage height: 100 - 200 mm Power supply: 230 V three-phase current Bljdpfsha Unyjx Adhep Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Enclosure dimensions: 1550x1400x950 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P5 4040/400 NT, Manufacturer: Kallfass GmbH Type: P5 4040/400 NT Year of manufacture: 2003 Bljdpfx Aezkcaljdhjp Technical data: Welding frame dimensions: 400 x 400 mm Film roll width: max. 500 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions: 400 x 400 mm. Proven impulse welding technology with Teflon-coated separating welding wire for an absolutely odorless working process. Equipped with a sealing mechanism as a press-down system to ensure accurate adherence to the set welding time and to allow for trouble-free separating welding, even with thick films. Inspection and demonstrations are possible by appointment at our premises.

Condition: used, Year of construction: 2007, functionality: fully functional, Universa 500 Servo with Kallfass Compact Tunnel Year of manufacture: 2007 The machine will be cleaned and overhauled prior to delivery. Installation and training in Western Europe and parts of Eastern Europe are included in the purchase price. The Universa 500 Servo is a film packaging machine with a continuous motion sealing bar. The output is specified as up to 100 cycles per minute, depending on the type of film and product. The sealing bar has a width of 550 mm. The maximum product height is 200 mm. Packaging performance depending on product and film: 100 cycles/min Length of cross sealing bar: 550 mm Max. passage height of sealing bar: 200 mm Min. product length: 80 mm Film: centre-folded film, approx. 12 - 80 µm Film roll holder: arranged at floor level for easy loading Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Conveyor speed: variable 10 - 40 m/min Sealing system: continuously heated sealing bar with replaceable sealing strip, temperature control and monitoring PLC user interface: Touch panel, SIEMENS TP 270 Blodpfx Adsy Nxvpshsp Programmable logic controller: SIMOTION® by SIEMENS® Film and product transport via vacuum conveyor to the continuous motion cross sealing unit Replaceable sealing strip; available in different profile shapes for optimal sealing seam quality depending on product and film Position-controlled product flow. No tedious readjustment of timing values required when changing formats or speed Power supply: 400 V three-phase, 50 Hz with protective earth, without cable and plug Rated power: 5 kVA Rated current (at 400 V): 7.3 A Available languages: German, English, French

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Blsdpsq Htfnjfx Adhsp Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 85 EVO The Minipack Replay 85 EVO is a mobile, manual shrink wrap machine with a hood, designed for large products and larger packaging formats. – Mobile, manual shrink wrap machine with hood – Output of up to 300 packages per hour – Usable sealing bar dimensions: 840 × 590 mm – Max. product dimensions: 800 × 590 × 300 mm Bljdpfx Asx Tr R Uodhop – Max. film roll dimensions: Ø 300 × 800 mm – Working table height: 940 mm – Machine dimensions (closed): 1,950 × 1,000 × 1,180 mm – Machine dimensions (open): 1,950 × 1,000 × 1,480 mm – Machine weight (net/gross): 212 / 264 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 55 EVO The Minipack Replay 55 EVO is a manual shrink film packaging machine with hood, designed for medium production volumes. – Throughput up to 300 units per hour – Usable sealing bar dimensions: 540 × 390 mm – Max. product dimensions: 500 × 380 × 200 mm – Max. film roll dimensions: Ø 250 × 600 mm – Working table height: 925 mm – Machine dimensions (closed): 1,260 × 810 × 1,165 mm – Machine dimensions (open): 1,260 × 810 × 1,310 mm Blodpfx Aex Tr N Dedhjp – Machine weight (net/gross): 105 / 126 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK Modular 70 The Minipack Modular 70 is a powerful semi-automatic packaging machine featuring an L-bar sealing system for producing shrink film packages. Thanks to its larger sealing bar, it is also suitable for packaging larger products. – Semi-automatic packaging machine with L-bar sealing – Electronically controlled sealing system – Manual or automatic operation modes – Simple and intuitive controls – Output up to 900 units per hour – Usable sealing bar dimensions: 840 × 600 mm – Max. film roll width: 800 mm – Max. film roll diameter: 300 mm – Working table height: 930 mm – Machine dimensions (closed): 2,070 × 960 × 1,220 mm – Machine dimensions (open): 2,070 × 960 × 1,510 mm Bljdpfx Ajx Tr Umjdhep – Net weight: 243 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 70 The Minipack Tunnel 50 is a well-insulated and quiet two-chamber shrink tunnel designed for wider and taller products. – Shrink tunnel for various packaging requirements – Suitable for different types of shrink films Bledpfx Adoyaqihehsp – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: up to 14.5 kW – Max. product dimensions: 680 × 390 mm (variable length) – Tunnel entry: 690 × 390 mm (W x H) – Machine dimensions: 2770 × 1160 × 1640 mm (L x W x H) – Machine weight (net/gross): 415 / 483 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Modular 50S The Minipack Modular 50S is a compact, well-proven semi-automatic packaging machine with L-shaped sealing for producing shrink wrap packaging. The machine is universally applicable and easy to operate. – Semi-automatic packaging machine with L-shaped sealing Bledpfx Aox Tr Tcjdhjp – Electronically controlled sealing system – Manual or automatic operation mode – Simple and intuitive operation – Output up to 900 units per hour – Usable sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm – Max. film roll diameter: 250 mm – Working table height: 930 mm – Machine dimensions (closed): 1,565 × 750 × 1,100 mm – Machine dimensions (open): 1,565 × 750 × 1,400 mm – Machine weight: 151 kg (net) – Machine on wheels

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Motorized conveyor belts in widths of 400 mm and 800 mm, available as infeed belts, outfeed belts, and general conveyor belts for Minipack packaging machines of the Pratika series, Modular series, etc. Bedoyaqn Rjpfx Adhelp

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, The Minipack Tunnel 50 Twin is designed for high packaging speeds with small products. Its dual heating chamber with separate controls ensures consistent shrink performance. Like all Minipack shrink tunnels, it is well insulated, energy efficient, and operates quietly. – Dual-chamber shrink tunnel – Independent control of heating chambers – High throughput and shrinking speed – Power supply: 400 V, 3-phase Blsdpfx Adjyank Ashop – Installed power: up to 15.0 kW – Maximum product dimensions: 400 × 190 mm (length variable) – Tunnel inlet: 450 × 210 mm – Machine dimensions: 2,130 × 800 × 1,460 mm – Machine weight (net/gross): 260 / 318 kg