Used special purpose machines for sale (116)

Condition: like new (used), functionality: fully functional, power: 18 kW (24.47 HP), Year of construction: 2010, There is a total of 6 pumps and motors sat on there own subframes as show in the pictures one of these pumps is a reverse for returning water or clearing the lines 5 are rated to 200bar maximum roughly 70 litres per minute on an 18wk motor and reverse pump with a max bar pressure of 20 bar with a flow rate or 200 litres per minute with a 7kw motor as current set up both could be change to up the flow rate Itsdpex Ilrnsfx Ah Usr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. Iodpfxex Ik Dcs Ah Uetr If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Ijdpfx Ahsx I Ef Uo Uetr Buyer responsible for disassembly!

Condition: used, Storax 12t Itodpfxex Ha Tqe Ah Ujr Immediately available

Year of construction: 2011, operating hours: 2,369 h, condition: excellent (used), functionality: fully functional, operating pressure: 2,400 bar, pump pressure: 2,400 bar, water pressure: 2,400 bar, machine/vehicle number: G55600085, Fully refurbished machine in 2020, only 257hours since, bought for project and never used after. Unit is in like new condition. Iodpfxsv S Duwe Ah Ujtr

Condition: excellent (used), IPG Ytterbium Fiber Laser Fiber Laser Here we offer you an IPG Ytterbium Fiber Laser fiber laser. IPG Ytterblum Fiber Laser Fiber Laser 90-240 VAC Itodohr Dafepfx Ah Uor Type Model Name: YLP-HP-2-1500-50-100 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Itjdpfxex Hff Eo Ah Ujr

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF. Itedpsx H R Ryefx Ah Uor

Condition: new, Year of construction: 2021, 2x new and unused Itjdpfxera A Dte Ah Uor Price per unit

Condition: excellent (used), Year of construction: 2018, operating hours: 19,394 h, functionality: fully functional, machine/vehicle number: 2522027, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,250 mm, total length: 5,900 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 6,139 mm, total height: 5,980 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 50 m/min, distance between stands: 3,225 mm, table load: 4,000 kg, workpiece weight (max.): 16,000 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, distance table center to spindle nose: 1,500 mm, tool weight: 8,000 g, Equipment: rotational speed infinitely variable, Control: Heidenhain TNC640 Number of controlled axes: 5; simultaneous Commissioned: 2019 Spindle run time (h): 12,629 Tool holder: HSK 100 Tool changer: 30 positions Linear motor Internal coolant supply (IKZ): 65 bar incl. chip conveyor Iedexx Svxjpfx Ah Uotr incl. special operator panel

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 158 h, functionality: fully functional, Equipment: documentation/manual, Filter Purifier ARX-2000 - USED - 157 HOURS AND 58 MINUTES Arx-2000 air treatment system is an air purifier filter for Co2 laser machine; it is sized for MT-1613 , MT-2513 and CO2 Conveyor Laser Machine Equipped with practical wheels. Our Arx systems greatly reduce pollutants and odors, providing excellent comfort to the working microclimate by having a low noise impact, thus having an efficient and effective air treatment system. The Arx-2000 laser machine air purifier filter is equipped with Glass Fiber and Polyester filtration system with the possibility of adding 12 Cylindrical Activated Carbon, Rigid Pocket Absolute Filters. With the touch screen controller you can easily turn the purifier on or off, check filter status and hours of operation. Flow rate 2000 mc/h Motor Power 2200 W Power Supply Voltage 220 V Frequency 50 Hz Inlet connection 2 of 150 mm Itodpfx Ahet Ua Ars Uer Outlet connection 200 mm Filters Fiber, Polyester, (Carbons and Absolute optional)

Condition: used, Tepla Tepla 400 SC 230 Volt 13A 50/60Hz Iedpfx Aheu T Egfo Uotr Pressure: 4-6 bar Scope of delivery: (see pictures) We will be happy to answer any further questions you may have over the phone. Written order possible by email or fax

Year of construction: 2007, condition: used, functionality: fully functional, Metalchem MDI-300 two-stage intensive mixer Iedpfx Aheqy H Eis Ustr

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, year of last overhaul: 2025, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol Isdpext Dk Rjfx Ah Uetr - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: excellent (used), Year of construction: 2022, operating hours: 95 h, functionality: fully functional, For sale: Complete industrial microwave generator system from MUEGGE GmbH (Germany), 30 kW at 915 MHz, in excellent condition with very low operating hours. This package includes the full WR975 high-power waveguide assembly, making it ideal for industrial heating, drying, food processing, chemical applications, and R&D environments. Technical Specifications Microwave Power Supply: • Output power: 30 kW • Frequency: 915 MHz • Input: 3 × 400 VAC, 50 Hz • Control interface: CAN Itjdpfx Ajx Ex Droh Uer • Colour: RAL7035 • Included: 10 m CAN cable Magnetron Head: • Power rating: 30 kW / 915 MHz • Waveguide interface: WR975 Included Waveguide Components: • 100 kW circulator, WR975 • WR975 waterload • Detector diode (for forward/reflected power monitoring) • 20 dB attenuator, Type R 412 720 Documentation: • Complete English instruction manual and technical documentation provided on USB stick. Condition: • Excellent – barely used • Fully functional and tested • Located in France • Ready for immediate dispatch Applications: • Industrial microwave heating • Drying and dehydration processes • Pasteurisation and food treatment • Chemical and materials processing • Research and development Original New Price: • €109,000 (manufacturer reference) Asking Price: • Negotiable, subject to shipping and inspection

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 65020107, Equipment: documentation/manual, I am offering an unused BVP 65 vacuum laminating press, E /380 Biedermann - 115x175 cm. It was used for picture framing. The machine can laminate graphics, posters, drawings, photographs, silk, and batik. The image is mounted onto cardboard or MDF inside the machine using heat and pressure. At the same time, a laminating film is applied on top of the image. The finished product is then protected not only against dirt but also against UV radiation, and is overall very lightweight. The lamination surface can be smooth, or textured with a canvas structure. Images with a coarse texture look like they are painted on canvas. Various laminating films are included in the price - see photos. The vacuum press is in good technical condition. Itodpfx Ahex Dq A Ij Uer

Year of construction: 2010, condition: ready for operation (used), -Voltage 400V. Itsdpfsx Icz Hex Ah Usr -Installed power 10.90Kw. -Temperature range from -25 to +100C. -Humidity range from 20% to 98%. -Interior dimensions 970x950x960mm. -2 shelves. -Weight 900kg. -Year of construction 2010.

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis and fulfills the normative requirements of the environmental authorities. All necessary climate control components are integrated. In combination with the HEPA filter, a contamination-free and precisely and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-decoupled granite for low-vibration installation of an ultra-microbalance Ionization device against static charge Flow protection for shielding the load cell Touch panel for intuitive operation Ethernet interface for process data exchange Iedpolddmzofx Ah Uetr Interior with sockets, earthing bolt Advantages: Meets normative requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45%r.H ± 3% Dimensions W/D/H 1,800/800/1,980 mm Clean room class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2003, condition: like new (used), Producer Eurolaser Year of Production 2004 Cutting area 1330x1200mm Maschine renovated Synrad tube 150 W new renovated Itedpfx Aohxyh Seh Uer We deliver with chiller and filter complete

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Automatic rewinder for foam. Itsdpfx Asx Dkinoh Usr A machine designed for winding elastic materials such as PUR foam, polyester foam, latex. It consists of an unwinding unit and a winding unit. The machine has been adapted to wind a foam roll from a cut foam block. Wound foam rolls are used in different industries such as mattress manufacturing, footwear, and clothing production, among others. The machine is fully automated. It allows you to wind a specified number of running meters per roll. The number of meters depends on the thickness of the material. Thanks to special dispensers, the machine precisely handles winding a set number of meters of any flexible material (such as PUR foam). Maximum roll width is 220 cm. Diameter of the finished roll is approx. 100 cm. The material is wound onto a 63 mm diameter cardboard core. Machine dimensions: 650x350x165 cm. Power: 2 kW. Very low noise level, around 69 dB. For those interested, please contact us. The machine is in very good condition with very few operating hours.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Iodpfx Ahedzc Rxj Ustr Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) Itedpjxqhnzsfx Ah Usr - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: SGJ450, Efficient Solution for Your Production – Almost As-New Cap Sorter "Jürgen Jahn" Made in Germany We offer you a high-quality cap sorter from the renowned company "Jürgen Jahn Sortier- und Zuführtechnik" (Weinstadt) – ideal for sorting and orienting closure caps for a wide variety of products. Currently, the machine is set up for nail polish caps, but it can be quickly and flexibly adapted to other types of caps – perfect for changing production requirements. Year of manufacture: 2005, from a well-maintained company liquidation Made in Germany, in almost as-new condition Robust technology, ready for immediate use Inspection and demonstration possible at any time by appointment in 73084 Salach – see the quality for yourself! If you have any questions or would like to schedule a viewing, we are always happy to assist you. Contact us now – before someone else does! Isdpfx Ahjw Evv Ee Ustr

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) Itedjlypy Ejpfx Ah Uor (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), machine/vehicle number: 5210529, Fully tooled up with loads of accessories and internal housing dial guage. Itedpfx Aev Abiteh Uor