Fray DIE Cutter

ABA G100

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table Lsdjwypp Ispfx Ah Uehr - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: new, Year of construction: 2025, ML750 Inner chase size Ljdpfxjvv R H Us Ah Ushr 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Lhjdpoh Eibasfx Ah Ujr Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Year of construction: 1985, Cutting width: 760 mm Lhsdpfxexyf Svj Ah Ujr Insertion depth: 760 m Working height (cutting height): 110 mm Table height: approx. 900 mm Machine dimensions (W×D×H): approx. 1,520 × 1,750 × 1,400 mm Pressure: 150–2,500 daN (infinitely adjustable) Machine weight: approx. 1,040 kg short-term available

Condition: excellent (used), Year of construction: 2003, Brochure production line Horizon VAC 100 A+M (year 2009) with stitching-folding station SPF 20A and trimmer FC 20A Lhedpfx Asv Sqr Njh Ujr

Condition: used, Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes. Lsdpfx Ahev H D Srj Uohr Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 100 000 Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Cleaning liquid full. Included with the used Brother GTX PRO Bulk : Lhodpfxjk Rkpno Ah Uer 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; 1 Kg of Premium DTF powder. Shipping not included We have various GTX Pro Bulk to sell and prices varies depending on print counts : Less than 40K prints : 10500€ between 40K et 60K prints : 12000€ between 60K et 80K prints : 11000€ between 80K et 100K prints : 10250€ More than 100K prints : 9500€

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Ledsvv R Hzjpfx Ah Ushr Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: good (used), Uchida BC 10 Business Card Cutter The UCHIDA BC-10 Business Card Cutter is a business card cutting machine that works with any high quality digital photocopying or printing device to produce professionally cut business cards automatically, easily and quickly. Whether you are a small business or a large corporation producing hundreds of cards per day, the innovative innovations applied to the UCHIDA BC-10 will satisfy any need. Lhjdpfx Ahjivd Aio Usr - Designed exclusively for business cards from A4 paper upwards - Up to 100 business cards per minute - Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper type Offset, coated, glossy paper Tolerance ±0.1 mm Item condition: used Scope of delivery: as shown More items - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of manufacture: 2017 Condition: functional - CMYK head replacement in 2022 plus one machine for spare parts Printing method Direct inkjet garment printer Machine size 55" (W) x 51" (D) x 21" (H) (1400mm x 1290mm x 535mm) Machine weight 260 lb (approx. 118 kg) Platen Sizes Maximum print size is 16" x 21" / 40.6cm x 53.3cm For a list of all available platen sizes, contact a Brother DTG Specialist. Lsdpjufkb Esfx Ah Uohr Included plate size 14" x 16" (35.6cm x 40.6cm) Ink Type Water Pigment Ink | C, M, Y, K, W Number of print heads 2 print heads / 8 ink channels Print resolution 1200 dpi x 1200 dpi Print mode Single or double for CMYK. Background and highlight for white. Data output Printer driver (USB, output to file) Power supply AC 100V-240V, 50/60Hz ± 1Hz Power consumption 0.8A (average) (Reference: 0.3A - during circulation) Ink fixation The heat press can be used at 356°F (180°C) and a duration of 35 seconds. For higher volume production, it is recommended to use the belt furnace at 320°F (160°C) for three and a half minutes. Time and temperature may vary depending on the particular manufacturer's dryer used. Supported OS Windows® 7(32 bit/64 bit), Windows 8.1(32 bit/64 bit), Windows 10(32 bit/64 bit), Mac OS® X v10.11.x Interface USB2.0, LAN (10 BASE-T, 100 BASE-TX), USB Flash memory (under 32GB, FAT32 format) Conditions for driver operation 3GHz CPU (minimum recommendation), 5GB RAM Display resolution XGA(1024x769) (minimum recommendation) Recommended applications CorelDRAW® X7/X8, Adobe® Photoshop CS6/CC, Adobe® Illustrator CS6/CC, Adobe® Photoshop Elements 14/15, GTX Graphics Lab