Industrial robot

ABB IRB 6650 3,2m/125kg

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg Podpfjyl Uh Sex Aazorb

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Pedpfx Aaetwqzrjzsrb

Condition: excellent (used), Year of construction: 2000, Refrigeration equipment Podpfx Aaed I Tlhjzerb Brand: Ers Type: SC 110. V/5 Power: 8 kW Year of manufacture: 2000

Condition: used, Year of construction: 1978, turning diameter over bed 1450 mm turning diameter over slide rest 1000 mm turning length 8000 mm spindle bore 160 mm turning speeds 2,8-560 U/min faceplate 1400 mm bed width 850 mm turning diameter in the gap 1800 mm length of gap 600 mm steady 1070 mm steady 1070 mm steady 650 mm Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Psdpfxeyqvwle Aazerb More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 1,000 kg, Column lifting rotating device 1 ton load capacity Protec turning device / positioner Syncrolift Double column, hand-held remote control wireless and manual Column adjustment can be moved twice Load capacity 1000 kg Pjdpfx Aevllfwoazsrb Minimum working height: 600 mm Maximum working height 1500 mm Speed 1 rpm Clamping plate diameter 500 mm Rotating movement 0.37 kW 2 to 10 ton load capacity possible on request

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Predpfxjxc Ni Rs Aazjb

Condition: used, Year of construction: 2017, Industrial robot Manufacturer: ABB Type: IRB6700-205/2.80 Year of manufacture: 2017 Includes controller Includes teach pendant Includes cable set Weight: approx. 1,260 kg 2 units available Psdpfewrcwcox Aazsrb Optional: with travel axis of approx. 25 m Type: IRBT6004 28926

Condition: new, The new Heinola SM chipper canter is now available for sale. It features two 160 kW motors and two chipper heads, each equipped with five straight chipper knives. The total weight of the unit is approximately 14,000 kg. Predpowfr Nujfx Aazob

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 600 h, functionality: fully functional, overall weight: 265 kg, load capacity: 22 kg, arm reach: 1,610 mm, controller model: KRC4, warranty duration: 3 months, Equipment: documentation/manual, Industrial ROBOT from manufacturer KUKA GmbH KUKA CYBERTECH series Model KR22 R1610 with KRC4 controller - 6-axis manipulator type KR20 R-1810, - arm load capacity 20 kg, - arm reach - radius R- 1810 mm, - weight of the robot manipulator 265 kg - control cabinet with KR-C4 controller, Running track for linear travel of the robot at a length of 2m type KL250-3 Robot mounted on an external linear axis with a length of 2.5m Pjdert H Itspfx Aazjrb The whole kit is mounted on a common mounting plate, connected and prepared for new projects. The robot kit on the rail, requires no additional specialized assembly or electrical connections. Just connect to the power supply and the kit is ready for further integration into a robotic station.

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, We are offering two new Totem 20 combined heat and power units (CHP) as well as a new Totem 10 CHP unit, year of manufacture 2016. These CHP units come from the liquidation of storage inventory. According to the previous owner, the units are eligible for CHP funding, as they have never been installed. However, this must be verified independently. The TOTEM 20 delivers a maximum output of 20 kW electrical and 48.5 kW thermal. The TOTEM 10 delivers a maximum output of 10 kW electrical and 25.2 kW thermal. For all further technical details, please refer to the uploaded datasheet and user manual. Depending on location, delivery within Germany or Austria can be arranged. Prjdjytympspfx Aazeb Price negotiable. The new list price for a Totem 20 is currently approximately €57,000 (gross) and they are traded for €45,000 (see photo). We are offering you an unbeatable deal. If you have any questions or need more information, please feel free to send us a message or call us. We offer a start-up guarantee, meaning we will take the units back in the event of difficulties at start-up, but we do not cover any incurred costs.