Used Manipulators for sale (39)

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: POSIFIL, load capacity: 80 kg, Used Dalmec Posifill industrial manipulator Manufacturer: Dalmec Model: POSIFIL Max load capacity: 80 kg Ksdpfx Aoxp Hvusg Nenc Year of manufacture: 1995

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Knedpju H R Iwjfx Ag Nsc Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Number of axis: 6 Ksdpov Hdk Iefx Ag Nsnc Payload: 5 kg

Condition: good (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, total height: 4,820 mm, total width: 15,000 mm, total length: 20,000 mm, type of input current: AC, input voltage: 400 V, SOCO SYSTEM End-of-Line Packaging Line with Robotic Palletizer, Carton Erectors & Sealers (Year of manufacture: 2020) This offer includes our complete SOCO SYSTEM shipping and end-of-line packaging line, exactly as installed in our facility. The system is fully operational, well-maintained, and was used until recently for pallet dispatch. This line is ideal for companies with high shipping or packaging volumes that value automated, efficient, and modular packaging processes. The system can be taken over in full or in part – we are happy to advise you on the optimal configuration. Knsdpfx Agjxdb Sao Nsc Technical Equipment / Components - 2 x Carton Erectors BE-2300 ATS and BE-2200 ATS Automatic carton erectors for folding and sealing bottom flaps (self-adhesive tape, width = 50 mm). - Long Flap Spreader For precise feeding and alignment of cartons onto the main conveyor line. - Powered Conveyors & Labelling Sections Roller conveyors, curves, and distribution lines with integrated label transport. - Carton Sealer T-4000 with Tape Alarm Automated top carton sealing with self-adhesive tape. - Labeller LOGOPAK Logomatik 415-T (integration ready) Transfers cartons for automatic labelling and verification via scanner. - Palletizing Robot SOCO PRS-LRS-1218-H3 Industrial robot for fully automated palletizing according to customer-specific patterns. - Pallet magazine for 14 pallets Automatic provision of empty pallets. - Safety Features: Swing doors / light curtains, emergency stop interlinking, Type 2 control, controller, CE certification. - Additional Modules: T-55 with conveyor system and ball table, F-100 + T-2000 conveyor system, RAL 9006 special colour. Complete assembly, factory testing, installation, and commissioning included (original system price according to SOCO SYSTEM offer: €243,700). Function Description The line automatically erects cartons, seals the bottoms, conveys them on the main packaging conveyor, closes and seals the tops, labels and inspects them. Error-free cartons are then picked up by the robotic palletizer and stacked according to defined pallet layouts. The entire system is modular and can be integrated into existing production or shipping operations. General Information Year of manufacture: 2020 Manufacturer: SOCO SYSTEM A/S Condition: used / very good / immediately operational Location: Norderstedt (near Hamburg) Scope of delivery: complete shipping line including robot, sealer, and conveyor technology.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We are offering a column manipulator from Zeilhofer here. This is the 'Mirus 80' model, year of manufacture 2018. The manipulator has a dead weight of 280 kg and a load capacity of 13 kg. Rotation of the main axis is 360º. Documentation is available. The manipulator functioned flawlessly until it was dismantled. It was only in use for a short period during trials. We consider its condition to be like new. Knjdpfxexgd Uvs Ag Nec

Condition: good (used), overall weight: 280 kg, FANUC positioner. manufactured in 2012. tested and serviced. Knedpfxowzk Syj Ag Nsc collection only

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer includes the following set: (it is possible to customize device parameters or purchase the vacuum lifter or crane separately) - Vacuum lifter for boards, designed among others for MDF, laminated, raw and chipboard panels, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for panel handling - Actuator for vertical-horizontal rotation - Six suction pads, Ø 200 mm - Adjustable suction pad positioning to adapt to varying panel dimensions - Traverse length: 2500 mm - Each suction pad equipped with a ball valve – allowing individual suction pad control - Compressed air pulse function to prevent material stickiness effect - Individual adjustment of each suction pad in X and Y axes - Gripper control via console (control panel): - Aggregator on/off - Vacuum suction/release - Electric hoist thumb control – raising/lowering the lifter - Manometer - Powered by compressed air – fitted with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane – technical data: • Column height: 4 m • Height under jib: 4 m • Jib length: 4 m • Lifting capacity: 400 kg • Slew range: 270 degrees • Lifting speed: approx. 3 m/min • Any RAL color available • Manual rotation • Manual trolley • Quadruple / double needle bearing for easy swing • Chain hoist: electric • CE certificate INCLUDED IN PRICE: Kjdpfx Agjxln Dre Nsnc • Column-mounted jib crane • 1-phase electric hoist • Manual trolley • CE certificate • Complete documentation Standard warranty: 12 months

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Kjdpfefgpfmox Ag Nonc Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: used, Year of construction: 2014, Type: IRB 6640 M2004 Variant: IRB 6640-130/3,2 Year: 2014 The ABB IRB 6640-130/3.2 robot is a 6-axis robot arm, it has a payload of 130 kg and a reach of 3200 mm. Manufacturing applications include Finishing. Machine has Pendant + Elektrobox / however it was used in Line there the box is maybe needs some adjustment for working alone. Kedpfx Agjvwb Iro Nsnc Weight ca: 1340 kg

Condition: new, Year of construction: 2025, This handling device is suitable for safely and stably handling large-area materials with just one operator. The device can be provided as an independent unit to any machine. The price-performance ratio is impressive, as the payback period is less than one year. Comprises the following main components (also available individually): • Column stand • Pivot arm • Lifting traverse with controls Technical data VT 1000: Lifting capacity: 1000 kg Max. lifting height: 1295 mm Lifting speed: 4 and 8 m/min Max. rotation radius: 3900 mm Power supply: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (weight dependent) Overall height: 2990 mm Total weight: 1350 kg Kodpfxsw Nh Dze Ag Njnc Alternatively, we also offer this handling device with a lifting capacity of 500 kg.

Condition: ready for operation (used), Year of construction: 2007, A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible. Kjdpfswhfniex Ag Njnc

Condition: excellent (used), Year of construction: 2014, Vacuum unit for e.g. manipulator, Dalmec - used - : Price (net), ex location: only €995 Manufacturer: dalmec Type: vacuum lifter Ksdpfevzli Iex Ag Nsnc Year of manufacture: 2014 Code: 85.16.0991 Load capacity: 7kg. Operating pressure: 0.60Mpa With this unit, plastic stacking boxes with external dimensions (LxWxH): 1,190 x 610 x 420mm filled with cable harnesses were lifted (see photos below) Condition: very good Available: immediately Location: Emden, later warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DS550 CA, overall weight: 50 kg, load capacity: 400 kg, VACUUM LIFTER PANEL SYSTEM DS550 CA Compact vacuum device for sandwich panels, ideal for wall installation. Its construction allows it to fit even in the trunk of a passenger car. The lifter is additionally equipped with a rotator, enabling 360° rotation of the panel. Available with radio control, manual operation, and a single-circuit version. Weight of the device: 50 kg Lifting capacity: 400 kg Control - radio/manual Power supply - external battery (DeWalt - one included, with charger) Battery charge indicator: Yes Mounting position: vertical/horizontal Kedpfx Agowutibj Njnc Vertical wall mounting: Yes Number of suction pads: 1 Material length: 1-8 m

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Kedpfx Agogbpuhs Nenc Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: new, Year of construction: 2025, This handling device is suitable for handling large-area materials safely and stably with only one operator. The device can be added to any machine as an independent unit. The price-performance ratio is convincing; because the payback time is less than one year. Consisting of the following main parts: (also available separately) - column stand Knsdpfefi Trbsx Ag Njc - swivel arm - Lifting traverse with operation Technical data VT 500: Lifting capacity: 500 kg max. lifting height : 1750 mm Lifting speed : 4 and 8 m/min Max. turning radius : 3900 mm Mains connection: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (depending on weight) Total height: 3580 mm Total weight: 850 kg Alternatively we offer this handling device with a lifting capacity of 1000 kg.

Condition: ready for operation (used), A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible. Kedpfx Agewt Tkpo Njnc

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 110 kg, Vacuum Lifter GLASS SYSTEM DS600 L Vacuum lifter for installation of large glass panes, shopfronts, and for glass transport. Thanks to its design, it allows for the installation of long, narrow panes as well as standard sizes. Specification: LIFTING CAPACITY – 450 kg Kjdew Hq I Eepfx Ag Nsnc CONTROL – radio remote control POWER SUPPLY – battery powered (up to 12 hours operation) BATTERY CHARGE INDICATOR – yes VERTICAL-HORIZONTAL ROTATION – yes AXIAL ROTATION – yes NUMBER OF SUCTION PADS – 4 NUMBER OF ARMS — HST GLASS LIFTING CAPABILITY – no GLASS SIZE – min. 0.3 x 1.5 m, max. 3 x 4.5 m NUMBER OF CIRCUITS – 2 ACTUATOR FOR ROTATION OPTION – yes MACHINE WEIGHT – 110 kg Lifting capacity can be increased to 650 kg and additional suction pads can be supplied at extra cost. Machine customization to individual requirements and purchase with a crane are available. Check our offer or contact us – we will surely find a solution tailored to your company’s needs!

Condition: used, Rotary table, 180° index table, rotary table with aluminium plate Positioning table, round table, 180° indexing round table Assembly table, tilting table Rotary plate: Ø 1080 mm Construction height to top of rotary plate: 630 mm - Rotary plate made of 25.5 mm thick aluminium sheet with various bores Knodpfor Dg Rdox Ag Noc - Very stably mounted rotary table, manually rotatable - 2 indexing positions at 180°, manually unlockable via foot pedal - Stop dampers under the rotary plate for positioning - Very sturdy steel subframe - Steel subframe flange plate L x W x H = 600 x 600 x 20 mm Required space Ø x H: 1080 x 630 mm Weight: 210 kg Good condition 2 pieces available, price per piece

Condition: ready for operation (used), A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible. Kedpfx Agowixzxj Nenc

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 600, overall weight: 60 kg, warranty duration: 12 months, GLASS SYSTEM DS600 MINI VACUUM LIFTER For facade installation, glass window assembly, and glass transportation. Device size optimized for operation between façades and scaffolding. Technical specifications Lifting capacity: Maximum lifting capacity: 350 kg Control system: Radio remote control (remote range up to 200 m) Battery charge indicator: Yes Power supply: Battery-powered, up to 12 hours of operation Construction: Number of suction cups: 4 Number of circuits: 1 Number of arms: — Device weight: 60 kg Movement capabilities: Vertical/horizontal rotation: No Rotation around own axis: No Option to use rotation actuator: No Supported material dimensions: Minimum: 0.8 x 0.8 m Maximum: 2.5 x 2.5 m Ability to lift HST glazing: No Compatibility: For use with cranes and HDS (truck-mounted cranes) Kedpfx Ajwzafpeg Nonc Flexible device configuration – can be tailored to individual customer needs

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. Knsdpfxeharwyj Ag Nsc infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: ready for operation (used), Year of construction: 2008, A stacker and destacker cutter for the PCB industry is available. 1) Stacker for slotted cassettes Kuttler SUE 50, year of construction: 2008, running direction: right-left, operating hours (plate counter): 2.8 million, weight: approx. 800 kg. 2) Single stacker for slotted cassettes Kuttler RLE 160, year of manufacture: 2004, with conveyor belt CO 800, year of manufacture: 2008, running direction: right-left, operating hours (plate counter): 5.4 million. The system is missing cylinders and brackets for automatic format adjustment. Documentation available. On-site inspection is possible. Knedpev Daggsfx Ag Njc

Condition: ready for operation (used), Year of construction: 2018, A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Ksdpfxowhfnps Ag Nenc

Condition: ready for operation (used), Year of construction: 2000, A total of three conveyor belts (transport modules) are available for the PCB industry. 1) Three-segment conveyor belt with buffer module Asys FPS 30, year of manufacture: 1996. 2) Transport module Rommel SM 600 T. 3) Transport module Rommel BM 500 S, year of manufacture: 2000. Documentation available. On-site inspection is possible. Kodpfowzlfusx Ag Njnc

Condition: ready for operation (used), Year of construction: 2019, A conveyor belt is available for buffering and transferring PCBs between processing systems. Transport height: 870mm-970mm, max. transport width: 460mm, min. PCB dimensions X/Y: 70mm/50mm, max. PCB dimensions X/Y: 460mm/460mm, PCB thickness: 0.5mm-4.5mm, max. PCB weight: 3kg. Machine dimensions X/Y/Z: approx. 1590mm/800mm/925mm, weight: approx. 170kg. Documentation available. On-site inspection is possible. Knedpfx Aswwvvvjg Nsc