Clarifier - Centrifuge

Alfa Laval SWPX 810 SGV-34CGL

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. Ppjdpfxetvau Ao Am Tsw MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: ready for operation (used), Further information will follow. Accessories: Separator frame (stainless steel) 1200 x 1000, separator drum, motor, Ppedpfx Aoqzx Dqem Tsw tool kit, documentation

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Ppodpfxox Aurko Am Tsw

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Ppedoftzgxjpfx Am Tew Any clarification, do not hesitate to contact us.

Condition: used, System: used piston diaphragm pump / pump Ppjdpodkdi Tefx Am Tow Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Podpfehy Tp Dex Am Tepw Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: like new (used), Manufacturer: Varian Type: NHS-35 Ppodpjhmba Asfx Am Tjw Condition: The pump is in very good condition and can also be supplied with a corner valve if required. Warranty: 3 months Delivery time: In stock

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Ppsdpogwlrdsfx Am Tsw Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Ppodpfx Aecbukrsm Tsw Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. It is still in place and runnning. Buyer to decommision and collect. Ppsdpfx Aexftitom Tew This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine